pysmappee 0.1.5

Offical Smappee dev API and MQTT python wrapper

Official Smappee Python Library

Python Library for the Smappee dev API (v3) and MQTT interface. Used as a wrapper dependency in the Home Assistant integration.

Version

0.1.5

Installation

The recommended way to install is via pip

$ pip3 install pysmappee

Getting Started

Before we can use PySmappee, we need to be authenticated to the Smappee cloud. The authentication mechanism is based on OAuth2 specification, for more information on the OAuth2 spec see http://oauth.net/documentation. We need to register our application with Smappee by contacting [e-mail].

Examples / Quickstart

Structure

Service location

A service location instance holds

• Service location id
• Service location uuid
• Service location name
• Device serial number
• Phase type
• Has solar production boolean
• Firmware version
• Latitude and longitude coordinates
• Timezone
• Presence boolean
• Appliances
• Actuators (Smappee Comfort Plug, Smappee Switch, Smappee Output Modules)
• Sensors (Smappee Gas and Water)
• Measurements (CT details)
• Realtime values
• Some predefined aggregated values

Appliances

An appliance instance holds the appliance id, name, type and source type (NILM or CT appliance)

appl = smappee.service_locations.get(12345).appliances  # where 12345 should be the correct servie location id
for appliance_id, appliance in appl.items():
    appliance.id
    appliance.name
    appliance.type
    appliance.source_type

Actuators

An actuator instance holds the actuator id, name, type, serialnumber, current state, state options and todays energy consumption

sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
for actuator_id, actuator in sl.actuators.items():
    actuator.id
    actuator.name
    actuator.type
    actuator.serialnumber
    actuator.state
    actuator.state_options
    actuator.consumption_today

Changing the actuator state can be done with the set_actuator_state in the service_location class.

# Example: turn OFF actuator with id 1 from service location 12345
sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
sl.set_actuator_state(id=1, state='OFF')

Sensors

A sensor instance holds the sensor id, name, channels, temperature, humidity and battery level.

sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
for sensor_id, sensor in sl.sensors.items():
    sensor.id
    sensor.name
    sensor.channels
    sensor.temperature
    sensor.humidity
    sensor.battery

Measurements

A measurement reflects a CT load and holds information like measurement id, name, (sub)type, channels and live values (active, reactive and current total).

sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
for measurement_id, measurement in sl.measurements.items():
    measurement.id
    measurement.name
    measurement.type
    measurement.subcircuit_type
    measurement.channels
    measurement.active_total
    measurement.reactive_total
    measurement.current_total

Realtime values

Realtime values are collected through central and local MQTT connections and kept in the service_location class.

sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
sl.total_power
sl.total_reactive_power
sl.solar_power
sl.alwayson
sl.phase_voltages  # lists
sl.phase_voltages_h3
sl.phase_voltages_h5
sl.line_voltages
sl.line_voltages_h3
sl.line_voltages_h5

Aggregated values

A predefined set of aggregated energy values are being saved in the service_location class. Reloading these values can be done by using the update_trends_and_appliance_states method

sl = smappee.service_locations.get(12345) # where 12345 should be the correct service location id
sl.update_trends_and_appliance_states()
aggr = sl.aggregated_values

aggr.get('power_today')
aggr.get('power_current_hour')
aggr.get('power_last_5_minutes')
aggr.get('solar_today')
aggr.get('solar_current_hour')
aggr.get('solar_last_5_minutes')
aggr.get('alwayson_today')
aggr.get('alwayson_current_hour')
aggr.get('alwayson_last_5_minutes')

Changelog

0.0.1

• Initial commit

0.0.2

• Rename smappee directory

0.0.3

• Sync dev API

0.0.{4, 5, 6}

• Actuator connection state
• Platform option
• Measurement index check
• Location details source change

0.0.{7, 8, 9}

• Support comfort plug state change
• Add locations without active device
• Disable IO modules
• Align connection state values

0.1.{0, 1}

• Refactor api to work with implicit account linking
• Only keep farm variable in API class

0.1.{2, 3}

• Only use local MQTT for 20- and 50-series
• 11-series do have solar production

0.1.4

• Extend service location class with voltage and reactive bools
• Extend model mapping

0.1.5

• Catch expired token as an HTTPError

Support

If you find a bug, have any questions about how to use PySmappee or have suggestions for improvements then feel free to file an issue on the GitHub project page https://github.com/smappee/pysmappee.

License

(MIT License)