Skip to main content

Python and command-line interface for Microsoft LiveConnect OneDrive REST API v5.0

Project description

python-onedrive

Compatibility note: if setup.py, requirements.txt and/or package depends on “skydrive.api_v5” module from python-skydrive (pre-rename, now it’s “onedrive.api_v5”), “python-onedrive==14.04.0” package (with old API) can be used in its place - i.e. just replace any “python-skydrive” pkg-spec with that.

Python and command-line interface for OneDrive REST API (version 5.0) (formerly known as SkyDrive).

This module allows to access data on Microsoft OneDrive cloud storage from python code, abstracting authentication, http requests and response processing to a simple python methods.

Module also comes with command-line tool to conveniently browse and manipulate OneDrive contents from interactive shell or scripts.

Thanks to AntonioChen for implementing windows and unicode support (see #3).

Service was called SkyDrive prior to 2014-02-19, when it got renamed to OneDrive. This package similarly renamed from python-skydrive to python-onedrive.

Be sure to read “Known Issues and Limitations” section below before use, to avoid any potentially nasty surprises.

Command-line usage

OneDrive API requires to register an application in DevCenter, providing you with client_id and client_secret strings, used for authentication.

I can’t provide some static ones because according to LiveConnect ToS “You are solely and entirely responsible for all uses of Live Connect occurring under your Client ID” (also see notes below), and I can’t just vouch for every module/tool user like that.

App registration in DevCenter is really straightforward and shouldn’t take more than a few clicks. Be sure to check the “mobile client app” box under “API settings”.

After that, create “~/.lcrc” file (YAML) with the contents like these:

client:
  id: '00000000620A3E4A'
  secret: gndrjIOLWYLkOPl0QhWIliQcg-MG1SRN

(use “id” and “secret” acquired in the app registration step above, indent these lines with spaces - indenting with tabs is not allowed in YAML; it might also be worth quoting “id” value, as shown above)

Then you need to perform OAuth 2.0 authorization dance by running the onedrive-cli auth command and following printed instructions (visit printed URL, authorize, click “Allow”, paste last URL back into terminal). This will get you authorization_code (which will be stored in ~/.lcrc) to use the API as a user you’ve logged-in as there. Repeat this step to authorize with a different account, if necessary.

Then just type whatever commands you want to (and don’t forget onedrive-cli --help):

% onedrive-cli tree

OneDrive:
    Documents:
        README.txt: file
    Pics:
        image1.jpg: photo
        image2.jpg: photo

% onedrive-cli get Pics/image1.jpg downloaded_image1.jpg
% onedrive-cli put downloaded_image1.jpg
% onedrive-cli ls

- Documents
- Pics
- downloaded_image1.jpg

% onedrive-cli quota

free: 24.9G
quota: 25.0G

% onedrive-cli link -t embed downloaded_image1.jpg

embed_html: <iframe src="https://onedrive.live.com/embed?cid=..."
    width="98" height="120" frameborder="0" scrolling="no"></iframe>

% onedrive-cli rm downloaded_image1.jpg
% onedrive-cli rm -h

usage: onedrive-cli rm [-h] object [object ...]

positional arguments:
  object      Object(s) to remove.

optional arguments:
  -h, --help  show this help message and exit

% onedrive-cli -h

...

Most commands should be self-descriptive, but use “–help” when they aren’t.

Note that objects specified on the command-line are implicitly resolved as human-readable paths (which are basically metadata) unless they look like an id. This might be undesirable from performance perspective (extra requests) and might be undesirable if non-unique “name” attributes of objects in the same parent folder are used. Use “-p” or “-i” (”–path” / “–id”) switches to control this explicitly. See LiveConnect docs or notes section below for more info on how these work.

If you get HTTP error 400 right after or during “auth” command, read this comment on #4 (maybe with some context).

And if stuff still doesn’t work, please check the “Known Issues and Limitations” section right below before reporting it, as some of these might be known and essentially unfixable.

Known Issues and Limitations

  • Uploading of files larger than ~100 MiB via single POST/PUT request is apparently not supported by OneDrive API - see #16 for details.

    Workaround in place is to fallback to (experimental at the moment of writing - 2014-11-23) BITS API for larger files, but it has a few issues, mentioned below.

  • Be very careful using this module on Windows - it’s very poorly tested there, which is apparent from several serious issues that’s been reported - see commit d31fb51 and this report, for instance.

    Not sure how useful might be explicitly breaking things for WIndows (to avoid users having such issues from the start), especially since it’s extra work to remove functionality that was contributed by someone else, who apparently found it useful to have here.

  • Some proprietary formats, like “OneNote notebook” just can’t be accessed (see #2). OneDrive doesn’t allow GET requests for these things and they’re also special exceptions to other API methods, no idea what can be done there.

  • It’s been reported (#17) that Onedrive for Business is not supported. It seem to have different SharePoint 2013 API.

  • Relying on BITS API too much might not be a good idea, as it seem to be in a very experimental state for regular OneDrive service, with only info I’ve seen on it (in relation to OneDrive, and not other MS services) being that linked gist (actually pointed out to me by @bobobo1618 in #34).

    Some issues with it (at the moment of writing this - 2014-12-08) are mentioned in #34 and #39.

    If you use this api for large uploads via command-line script and are getting annoying http 5XX errors at the end of the large uploads, check out the --bits-do-auth-refresh-before-commit-hack flag for the “put” command.

  • Only in command-line script, HTTP error 400 (“Bad Request”) during first authentication process can sometimes be caused by using (i.e. putting it there by hand) unquoted “jackpot” client_id in the YAML, which matches YAML octal integer pattern (all digits, in 0-7 range).

    Script detects this, emits a warning and tries to work around it, which should work in most cases, but is not perfect, so try quoting the value if it fits the above description. That’s how it should be done for strings in YAML.

Module usage

doc/api.md file contains auto-generated (from code) API docs.

API code is split between three classes:

  • HTTP wrapper - OneDriveHTTPClient

  • Authentication methods - OneDriveAuth

  • Unbiased and simple wrappers around HTTP calls - OneDriveAPIWrapper, each one returning decoded HTTP response (i.e. whatever request method in OneDriveHTTPClient returns).

  • Biased convenience methods - OneDriveAPI

Such separation allowed to reuse OneDriveAPIWrapper class to wrap async (returning “Deferred” objects instead of data) in txOneDrive just by overriding “request” method from OneDriveHTTPClient.

See also onedrive/cli_tool.py for real-world API usage examples.

Installation

It’s a regular package for Python 2.7 (not 3.X).

Using pip is the best way:

% pip install 'python-onedrive[cli]'

If you don’t have it, use:

% easy_install pip
% pip install 'python-onedrive[cli]'

Alternatively (see also pip2014.com and install guide):

% curl https://raw.github.com/pypa/pip/master/contrib/get-pip.py | python
% pip install 'python-onedrive[cli]'

Or, if you absolutely must:

% easy_install python-onedrive requests

But, you really shouldn’t do that.

Current-git version can be installed like this:

% pip install 'git+https://github.com/mk-fg/python-onedrive.git#egg=python-onedrive'

“cli” option above enables dependency on “requests” and “PyYAML” modules, which are used as a default http client lib and for the cli tool configuration respectively.

If the plan is to only use python module, “standalone” extras-flag can be used instead (will only pull in “requests” module).

And in case the module is used with different http client lib (i.e. plan is to extend/override that), no flags can be specified to avoid dragging in extra (unused) deps.

Note that to install stuff in system-wide PATH and site-packages, elevated privileges are often required. Use “install –user”, ~/.pydistutils.cfg or virtualenv to do unprivileged installs into custom paths.

Alternatively, ./onedrive-cli tool can be run right from the checkout tree without any installation, if that’s the only thing you need there.

Requirements

  • Python 2.7 (not 3.X)

  • (unless your plan is to override that) requests - version 0.14.0 or higher.

    Should be installed automatically by pip if “[standalone]” or “[cli]” extras-flag is specified, as suggested above.

  • (optional, recommended) PyYAML - required for CLI tool and optional persistent-state (“conf”) module only.

    Gets pulled-in as a dependency with “[cli]” or “[conf]” extras-flag.

  • (only on windows) pywin32 - for CLI tool (used to lock configuration file on changes) and optional conf module only.

  • (optional) chardet - only used to detect encoding (utf-8, gbk, koi8-r, etc) of the command-line arguments to support workng with non-ascii (e.g. cyrillic, chinese) names, if explicitly requested.

    Not needed unless you specifically use cli tool with “–encoding detect” option, which is probably a bad idea in general anyway.

LiveConnect/OneDrive API (v5.0) notes

Important: these details can (naturally) go obsolete, especially if timestamp of this doc is older than the one of the API docs, in which case please open an Issue pointing to the inconsistency.

It’s quite a conventional REST API with JSON encoding of structured data, like pretty much every other trendy modern API, say, github.

Authentication is “OAuth 2.0”, which is quite ambigous all by itself, and especially when being implemented by well-known for it’s proprietary “cripple-everything-else” extension creep Microsoft. It has a twist in authrization_code grant flow for “mobile” apps, where bearer token refresh can be performed without having to provide client_secret. Client app must be marked as “mobile” in DevCenter for that to work. There’s also totally LiveConnect-specific “Sign-In” auth flow. Access tokens for OneDrive scopes (plus wl.offline) seem to be issued with ttl of one hour.

Permissions are set per-path, are inherited for the created objects and cannot be changed through the API, only through the Web UI (or maybe proprietary windows interfaces as well).

Accessible to everyone URL links (of different types - embedded, read-only, read-write, preauthenticated) to any restricted-access object (that is reachable through the API) can be provided in “preauthenticated” form, a bit like in tahoe-lafs, but probably without the actual crypto keys embedded in them (not much point as they’re kept server-side along with the files anyway).

All but a few default paths (like “my_documents”) are accessed by file/folder IDs. All IDs seem to be in the form of “{obj_type}.{uid_lowercase}.{uid_uppercase}!{obj_number}”, where “obj_type” is a type of an object (e.g. “file”, “folder”, etc), “uid_*” is some 8-byte hex-encoded value, constant for all files/folders of the user, and “obj_number” is an integer value counting up from one for each uploaded file.

UI-visible names come on top of these IDs as metadata, so “rename” is essentially a metadata “name” field update and two files/folders with the same “name” can co-exist in the same parent folder, though uploading a file defaults to overwriting file with same “name” (disableable).

Aforementioned “default paths” (like “my_documents”) don’t seem to work reliably with copy and move methods, unless resolved to folder_id proper.

There’s a “Recycle Bin” path in web interface, which I don’t recall seeing any way to access, which keeps all removed files (for some limited time, presumably). Files removed through the API end up there as well.

There are some handy special OneDrive-related API URLs for stuff like quota, list of recent changes and a list of shared-with-me objects.

Files have a lot of metadata attached to them, parsed from their contents (exif data for photos, office documents metadata, etc). API allows to request image-previews of an items, links to which are also available in file (object) metadata.

There was an issue with public.bay.livefilestore.com hosts (to which actual file store/retrieve requests get redirected) not working with clients advertising TLS -1.2 (see issue-1 on github), but it seem to be gone by now (2014-11-21).

File uploads can either use PUT or POST requests, but former (PUT) must use “Transfer-Encoding: chunked” or requests just hang and get closed by the server. For more info on this quirk, see github issue #30.

Errors can be returned for most ops, encoded as JSON in responses and have a human-readable “code” (like “resource_quota_exceeded”) and descriptive “message”.

According to “OneDrive interaction guidelines”, it is discouraged (though not explicitly prohibited) to upload files in non-conventional formats that aren’t useable to other apps (under “Use OneDrive for the things that it’s good at”):

To support this principle, the Live Connect APIs limit the set of file formats
that apps can upload to OneDrive.

ToS for LiveConnect APIs is kinda weird, having unclear (at least to layman like me) stuff like this:

  • You may only use the Live SDK and Live Connect APIs to create software.

    Seem to imply that APIs shouldn’t be used in hardware, but I fail to see why it can’t also be interpreted as “only create software, not just use it to get/store stuff”.

  • You are solely and entirely responsible for all uses of Live Connect occurring under your Client ID.

    So either you take the blame for every potential user or go make all users register their own app? Hopefully I’ve misinterpreted that one.

After SkyDrive -> OneDrive rename (on 2014-02-19), API remained the same, with same URLs, same “me/skydrive” root, and API docs still seem to refer to the service as SkyDrive.

For more robust and fault-tolerant uploads, OneDrive seem to support BITS API, allowing to upload each individual file via several http requests, with some (non-overlapping) byte-range in each. More details/discussion on this API can be found in issue-34 on github and this github gist. As of now (2014-11-21), this is “preliminary documentation and is subject to change”.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

python-onedrive-15.01.5.tar.gz (26.2 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page