Skip to main content

Community-coded Python module for TSL2591 sensor converted from Adafruit's TSL2591 library. Use at your own risk.

Project description

TSL2591 Python Library

GitHub stars GitHub forks GitHub issues Inspired by Adafruit Build Status

This is a simple python library for the Adafruit TSL2591 breakout board based on the Arduino library from Adafruit. It was developed to work on a Raspberry PI.

Requirements

To use this library, you must have the following:

  1. TSL2591 sensor (not the TSL2561)
  2. I2C enabled device
  3. Python 3 (though Python 2 should technically still work)

Installation

This module can be installed using pip (and can find a copy of this module on PyPi).

pip install python-tsl2591

Quickstart

This library comes with an example file you can use, or you can copy and paste the following:

from python_tsl2591 import tsl2591
import time

if __name__ == '__main__':

    tsl = tsl2591()  # initialize
    # full, ir = tsl.get_full_luminosity()  # Read raw values (full spectrum and infared spectrum).
    # lux = tsl.calculate_lux(full, ir)  # Convert raw values to Lux.

    while True:
        print(tsl.get_current()) # Return object with all values.
        # print (lux, full, ir)
        time.sleep(2)

Install from Source

You can also install this Python module from source:

git clone https://github.com/kyletaylored/python-tsl2591
cd python-tsl2591
python setup.py install

Enabling I2C on your Raspberry Pi

You can enable I2C on the Raspberry Pi by following the instructions on Adafruit.

The quick version is:

  1. Run sudo raspi-config
  2. Select Advanced Options
  3. Enable I2C
  4. Reboot (sudo reboot)

When testing I2C (sudo i2cdetect -y 1), you should see at least one connected device, your TSL2591 at 0x29. For more information, see the FAQ.

FAQ

Fatal error (deprecated)

UPDATE: We have integrated the smbus2 library, which is an smbus library built in Python, and does not require any system packages like smbus-cffi or libffi-dev.

If you do not have those Raspbian packages installed prior to installing this library, you will run into errors that look similar to this.

fatal error: ffi.h: No such file or directory
     #include <ffi.h>
                     ^
compilation terminated.
error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

I2C Check for Static Address

Because the TSL2591 connects via I2C, it's always good to run the I2C detection to verify the address is being read. Unlike the TSL2561 with programmable addresses, the TSL2591's address is hard coded and cannot be changed - thus it will always show 0x29.

In the example output below, you can see there are two I2C devices detected, one being the TSL2591.

pi@raspberrypi:~ $ sudo i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

License

Python files in this repository are released under the MIT license.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

python-tsl2591-0.2.0.tar.gz (12.1 kB view hashes)

Uploaded Source

Built Distribution

python_tsl2591-0.2.0-py2.py3-none-any.whl (6.9 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page