pywizlight 0.2.3

A python connector for WiZ light bulbs (e.g SLV Play)

pywizlight

A python connector for WiZ light bulbs. Work in progress an only tested with the SLV Play RGB bulb.

Bulb paramters:

• sceneId - calls one of thr predefined scenes (int from 0 to 32) Wiki
• speed - sets the color changing speed in precent
• dimming - sets the dimmer of the bulb in precent
• r - red color range 0-255
• g - green color range 0-255
• b - blue color range 0-255
• c - cold white range 0-255
• w - warm white range 0-255
• id - the bulb id

Classes

wizlight(ip) Creates a instance of a WiZ Light Bulb. Constructor with ip of the bulb

Instance variables

brightnessgets the value of the brightness 0-255

color get the rgbW color state of the bulb and turns it on

colortemp get the color temperature ot the bulb

rgb get the rgb color state of the bulb and turns it on

status returns true or false / true = on , false = off

Methods

getBulbConfig(self) returns the configuration from the bulb

getState(self) gets the current bulb state - no paramters need to be included

hex_to_percent(self, hex) helper for convertring 0-255 to 0-100

percent_to_hex(self, percent) helper for converting 0-100 into 0-255

lightSwitch(self) turns the light bulb on or off like a switch

sendUDPMessage(self, message) send the udp message to the bulb

turn_off(self) turns the light off

turn_on(self) turns the light on

Bulb methodes (UDP nativ):

• getSystemConfig - gets the current system configuration - no paramters need
• syncPilot - sent by the bulb as heart-beats
• getPilot - gets the current bulb state - no paramters need to be included
• setPilot - used to tell the bulb to change color/temp/state
• Pulse - uncertain of purpose
• Registration - used to "register" with the bulb: This notifies the built that it you want it to send you heartbeat sync packets.

Example requests

Send message to the bulb: {"method":"setPilot","params":{"r":255,"g":255,"b":255,"dimming":50}} Response: {"method":"setPilot","env":"pro","result":{"success":true}}

Get state of the bulb: {"method":"getPilot","params":{}} Response: {"method":"getPilot","env":"pro","result":{"mac":"0000000000","rssi":-65,"src":"","state":false,"sceneId":0,"temp":6500,"dimming":100}}