r0c 1.3.0

retr0chat telnet/vt100 chat server

r0c telnet server

• retr0chat, irc-like chat service for superthin clients (on PyPI)
• MIT-Licensed, 2018-01-07, ed @ irc.rizon.net
• windows telnet 360 noscope <- good video

• download the latest release (standalone): r0c.py

summary

imagine being stuck on ancient gear, in the middle of nowhere, on a slow connection between machines that are even more archaic than the toaster you're trying to keep from falling apart

retr0chat is the lightweight, no-dependencies, runs-anywhere solution for when life gives you lemons

• tries to be irssi
• zero dependencies on python 2.6, 2.7, 3.x
• supports telnet, netcat, /dev/tcp, TLS clients
• fallbacks for inhumane conditions
  • linemode
  • no vt100 / ansi escape codes

endorsements

• the german federal office for information security does not approve

features

irc-like:

• public channels with persistent history (pgup/pgdn)
• private messages (/msg acidburn hey)
• nick completion with Tab ↹
• notifications (bell/visual) on hilights and PMs
• command subset (/nick, /join, /part, /names, /topic, /me)
• inline message coloring, see /help

technical:

• client behavior detection (echo, colors, charset, newline)
• message input with readline-like editing (arrow-left/right, home/end, backspace)
  • history of sent messages (arrow-up/down)
• bandwidth-conservative (push/pop lines instead of full redraws; scroll-regions)

windows clients

• use putty in telnet mode
• or the powershell client
• or enable Telnet Client in control panel -> programs -> programs and features -> turn windows features on or off, then press WIN+R and run telnet r0c.int

putty is the best option;

• the powershell client is OK and no longer spammy as of windows 10.0.15063 (win10 1703 / LTSC)
• windows-telnet has a bug (since win7) where non-ascii letters occasionally render but usually dont
  • this is due to a buffer overflow in telnet.exe, so r0c will apply a rate-limit to avoid it
  • looks like messages larger than 512 bytes end up messing with the unicode glyphs area? or something

linux clients

most to least recommended

client	example
telnet	telnet r0c.int
socat	socat -,raw,echo=0 tcp:r0c.int:531
bash	mostly internals
netcat	nc r0c.int 531

you can even exec 147<>/dev/tcp/r0c.int/531;cat<&147&while IFS= read -rn1 x;do [ -z "$x" ]&&x=$'\n';printf %s "$x">&147;done (disconnect using exec 147<&-; killall cat #sorry)

tls clients

if you enable TLS with -tpt 2424 (telnet) and/or -tpn 1515 (netcat) you can connect to r0c with TLS encryption using any of the following:

• telnet-ssl -zssl -zsecure -zcacert=r0c.crt r0c.int 2424
• socat -,raw,echo=0 openssl:r0c.int:1515,cafile=cert.crt
• stty -icanon; ncat --ssl --ssl-trustfile r0c.crt -v r0c.int 1515
• stty -icanon; openssl s_client -CAfile ~/.r0c/cert.crt -connect r0c.int:1515

firewall rules

telnet uses port 23 by default, so on the server you'll want to port-forward 23 to 2323 (and 531 to 1531 for plaintext):

iptables -A INPUT -p tcp --dport 23 -m state --state NEW -j ACCEPT
iptables -A INPUT -p tcp --dport 531 -m state --state NEW -j ACCEPT
iptables -A INPUT -p tcp --dport 2323 -m state --state NEW -j ACCEPT
iptables -A INPUT -p tcp --dport 1531 -m state --state NEW -j ACCEPT
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 23 -j REDIRECT --to-port 2323
iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 531 -j REDIRECT --to-port 1531

documentation

not really but there is a list of commands and a list of hotkeys