radoneye 2.0.1

API and CLI for Ecosense RadonEye devices

Ecosense RadonEye CLI and API for Python

Provides simple and convinient Python API to communicate with RadonEye bluetooth devices.

Built as an alternative to half done similar projects where either 1 or 2 version is supported, not all status properties are decoded, no history support, no beep and alarm support etc.

Device support list:

Name	Version	Supported	Tested by
RD200	1	YES	Tested by [e-mail]
RD200N	2	YES	Tested by author
RD200P	2	YES?	Pending testing

Capability support list:

Name	Version 1	Version 2
Read serial number	YES	YES
Read software version	YES	YES
Read latest level	YES	YES
Read daily average level	YES	YES
Read monthly average level	YES	YES
Read peak historical level	YES	YES
Read raw particle counts	YES	YES
Read uptime	YES	YES
Read history	YES	YES
Trigger beep	YES	YES
Read alarm settings	YES	YES
Write alarm settings	YES	YES
Read unit settting	YES	YES
Write unit settting	YES	YES
Erase all data	NO	NO

Usage (API)

Scan for all available devices, beep, read status and history:

import asyncio
import json
from sys import stderr

from radoneye import RadonEyeClient, RadonEyeScanner


async def main():
    for dev in await RadonEyeScanner.discover():
        print(f"Device: {dev}")

        async with RadonEyeClient(dev) as client:
            try:
                await client.beep()
                print("Beep: ok")
            except Exception:
                print("Unable to beep due to error", file=stderr)

            try:
                print(f"Status: {json.dumps(await client.status())}")
            except Exception:
                print("Unable to obtain status due to error", file=stderr)

            try:
                print(f"History: {json.dumps(await client.history())}")
            except Exception:
                print("Unable to obtain history due to error", file=stderr)

            try:
                print("Setting up alarm")
                await client.set_alarm(enabled=True, level=2.0, unit="pci/l", interval=60)
            except Exception:
                print("Unable to set alarm due to error", file=stderr)

            try:
                print("Setting up unit")
                await client.set_unit("pci/l")
            except Exception:
                print("Unable to set unit due to error", file=stderr)


if __name__ == "__main__":
    asyncio.run(main())

Usage (CLI)

$ pip3 install radoneye

$ radoneye --help

$ radoneye list --help
$ radoneye list
70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9	FR:RU22201030383
3775964E-C653-C00C-7F02-7C03F9F0122D	FR:RU22204180050

$ radoneye beep --help
$ radoneye beep 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
beep

$ radoneye status --help
$ radoneye status 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
alarm_enabled	yes
alarm_interval_minutes	60
alarm_level_bq_m3	74
alarm_level_pci_l	2.0
counts_current	0
counts_previous	1
counts_str	0/1
day_avg_bq_m3	7
day_avg_pci_l	0.19
display_unit	pci/l
firmware_version	V2.0.2
latest_bq_m3	7
latest_pci_l	0.19
model	RD200N
month_avg_bq_m3	0
month_avg_pci_l	0.0
peak_bq_m3	35
peak_pci_l	0.95
serial	RU22201030383
uptime_minutes	20734
uptime_str	14d09h34m

$ radoneye history --help
$ radoneye history 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
#	Bq/m3	pCi/L
1	2	0.05
2	9	0.24
3	20	0.54
4	10	0.27
5	10	0.27
6	5	0.14
7	5	0.14
8	3	0.08
9	10	0.27
10	10	0.27
...

$ radoneye unit --help
$ radoneye unit 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
pci/l
$ radoneye unit 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9 --unit bq/m3
bq/m3
$ radoneye unit 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
bq/m3

$ radoneye alarm --help
$ radoneye alarm 70C12E8A-27F6-3AEC-0BAD-95FA94BF17A9
alarm_enabled	yes
alarm_interval_minutes	60
alarm_level_bq_m3	74
alarm_level_pci_l	2.0
$ radoneye alarm --status on --level 2.0 --unit pci/l --interval 60
alarm_enabled	yes
alarm_interval_minutes	60
alarm_level_bq_m3	74
alarm_level_pci_l	2.0

NOTE: On macOS bluetooth addresses are obfuscated to UUIDs.

License

MIT