Skip to main content

Redfish Service Validator

Project description

Copyright 2016-2024 DMTF. All rights reserved.

Redfish Service Validator

About

The Redfish Service Validator is a Python3 tool for checking conformance of any "device" with a Redfish interface against Redfish CSDL schema. The tool is designed to be device-agnostic and is driven based on the Redfish specifications and schema intended to be supported by the device.

Installation

From PyPI:

pip install redfish_service_validator

From GitHub:

git clone https://github.com/DMTF/Redfish-Service-Validator.git
cd Redfish-Service-Validator
python setup.py sdist
pip install dist/redfish_service_validator-x.x.x.tar.gz

Requirements

External modules:

You may install the prerequisites by running:

pip3 install -r requirements.txt

If you have a previous beautifulsoup4 installation, use the following command:

pip3 install beautifulsoup4 --upgrade

There is no dependency based on Windows or Linux OS. The result logs are generated in HTML format and an appropriate browser, such as Chrome, Firefox, or Edge, is required to view the logs on the client system.

Usage

Example usage without providing a configuration file:

rf_service_validator -u root -p root -r https://192.168.1.1

Example usage with a configuration file:

rf_service_validator -c config/example.ini

The following sections describe the arguments and configuration file options. The file config/example.ini can be used as a template configuration file. At a minimum, the ip, username, and password options must be modified.

[Tool]

Variable CLI Argument Type Definition
verbose -v integer Verbosity of tool in stdout; 0 to 3, 3 being the greatest level of verbosity.

[Host]

Variable CLI Argument Type Definition
ip -r string The address of the Redfish service (with scheme); example: 'https://123.45.6.7:8000'.
username -u string The username for authentication.
password -p string The password for authentication.
description --description string The description of the system for identifying logs; if none is given, a value is produced from information in the service root.
forceauth --forceauth boolean Force authentication on unsecure connections; 'True' or 'False'.
authtype --authtype string Authorization type; 'None', 'Basic', 'Session', or 'Token'.
token --token string Token when 'authtype' is 'Token'.
ext_http_proxy --ext_http_proxy string URL of the HTTP proxy for accessing external sites.
ext_https_proxy --ext_https_proxy string URL of the HTTPS proxy for accessing external sites.
serv_http_proxy --serv_http_proxy string URL of the HTTP proxy for accessing the service.
serv_https_proxy --serv_https_proxy string URL of the HTTPS proxy for accessing the service.

[Validator]

Variable CLI Argument Type Definition
payload --payload string The mode to validate payloads ('Tree', 'Single', 'SingleFile', or 'TreeFile') followed by resource/filepath; see below.
logdir --logdir string The directory for generated report files; default: 'logs'.
oemcheck --nooemcheck boolean Whether to check OEM items on service; 'True' or 'False'.
uricheck --uricheck boolean Allow URI checking on services below RedfishVersion 1.6.0; 'True' or 'False'.
debugging --debugging boolean Output debug statements to text log, otherwise it only uses INFO; 'True' or 'False'.
schema_directory --schema_directory string Directory for local schema files.
mockup --mockup string Directory tree for local mockup files. This option enables insertion of local mockup resources to replace missing, incomplete, or incorrect implementations retrieved from the service that may hinder full validation coverage.
collectionlimit --collectionlimit string Sets a limit to links gathered from collections by type (schema name).
Example 1: ComputerSystem 20 limits ComputerSystemCollection to 20 links.
Example 2: ComputerSystem 20 LogEntry 10 limits ComputerSystemCollection to 20 links and LogEntryCollection to 10 links.
requesttimeout --requesttimeout integer Timeout in seconds for HTTP request waiting for response.
requestattempts --requestattempts integer Number of attempts after failed HTTP requests.

Payload Option

The payload option takes two parameters as strings.

The first parameter specifies how to test the payload URI given, which can be 'Single', 'SingleFile', 'Tree', or 'TreeFile'. 'Single' and 'SingleFile' will test and give a report on a single resource. 'Tree' and 'TreeFile' will test and give a report on the resource and every link from that resource.

The second parameter specifies a URI of the target payload to test or a filename of a local file to test.

For example, --payload Single /redfish/v1/AccountService will perform validation of the URI /redfish/v1/AccountService and no other resources.

Mockup Option

The mockup option takes a single parameter as a string. The parameter specifies a local directory path to the ServiceRoot resource of a Redfish mockup tree.

This option provides a powerful debugging tool as is allows local "mockup" JSON payloads to replace those retreived from the unit under test. This can aid testers by allowing the tool to skip over problematic resources, which may cause the tool to crash, or more likely, miss portions of the implemented resources due to missing or invalid link properties or values.

The mockup files follow the Redfish mockup style, with the directory tree matching the URI segments under /redfish/v1, and with a single index.json file in each subdirectory as desired. For examples of full mockups, see the Redfish Mockup Bundle (DSP2043) at https://www.dmtf.org/sites/default/files/standards/documents/DSP2043_2024.1.zip.

Populate the mockup directory tree with index.json files wherever problematic resources need to be replaced. Any replaced resource will report a Warning in the report to indicate a workaround was used.

Execution Flow

  1. The Redfish Service Validator starts by querying the service root resource from the target service and collections information about the service.
    • Collects all CSDL from the service.
  2. For each resource found, it performs the following:
    • Reads all the URIs referenced in the resource.
    • Reads the schema file related to the particular resource and builds a model of expected properties.
    • Tests each property in the resource against the model built from the schema.
  3. Step 2 repeats until all resources are covered.

When validating a resource, the following types of tests may occur for each property:

  • Verify @odata properties against known patterns, such as @odata.id.
  • Check if the property is defined in the resource's schema.
  • Check if the value of the property matches the expected type, such as integer, string, boolean, array, or object.
  • Check if the property is mandatory.
  • Check if the property is allowed to be null.
  • For string properties with a regular expression, check if the value passes the regular expression.
  • For enumerations, check if the value is within the enumeration list.
  • For numeric properties with defined ranges, check if the value is within the specified range.
  • For object properties, check the properties inside the object againt the object's schema definition.
  • For links, check that the URI referenced matches the expected resource type.

CSDL syntax errors will cause testing to halt and move on to other resources. The OData CSDL Validator (https://github.com/DMTF/Redfish-Tools/tree/main/odata-csdl-validator) can be used to identify schema errors prior to testing.

Conformance Logs - Summary and Detailed Conformance Report

The Redfish Service Validator generates an HTML report under the 'logs' folder and is named as 'ConformanceHtmlLog_MM_DD_YYYY_HHMMSS.html', along with a text and config file. The report gives the detailed view of the individual properties checked, with pass, fail, skip, or warning status for each resource checked for conformance.

Additionally, there is a verbose text log file that may be referenced to diagnose tool or schema problems when the HTML log is insufficient.

The Test Status

The test result for each GET operation will be reported as follows:

  • PASS: If the operation is successful and returns a success code, such as 200 OK.
  • FAIL: If the operation failed for reasons mentioned in GET method execution, or some configuration.
  • SKIP: If the property or method being checked is not mandatory is not supported by the service.

Limitations

The Redfish Service Validator only performs GET operations on the service. Below are certain items that are not in scope for the tool.

  • Other HTTP methods, such as PATCH, are not covered.
  • Query parameters, such as $top and $skip, are not covered.
  • Multiple services are not tested simultaneously.

Building a Standalone Windows Executable

The module pyinstaller is used to package the environment as a standlone executable file; this can be installed with the following command:

pip3 install pyinstaller

From a Windows system, the following command can be used to build a Windows executable file named RedfishServiceValidator.exe, which will be found in dist folder:

pyinstaller -F -w -i redfish.ico -n RedfishServiceValidator.exe RedfishServiceValidatorGui.py

Release Process

  1. Go to the "Actions" page
  2. Select the "Release and Publish" workflow
  3. Click "Run workflow"
  4. Fill out the form
  5. Click "Run workflow"

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

redfish_service_validator-2.4.9.tar.gz (79.1 kB view details)

Uploaded Source

Built Distribution

redfish_service_validator-2.4.9-py3-none-any.whl (79.5 kB view details)

Uploaded Python 3

File details

Details for the file redfish_service_validator-2.4.9.tar.gz.

File metadata

File hashes

Hashes for redfish_service_validator-2.4.9.tar.gz
Algorithm Hash digest
SHA256 443ad7ca82aa4054649e99e18cf6d71f88746265e970604f7279d1a789af4bfa
MD5 5777b70009016e0da63f24dd44c68101
BLAKE2b-256 4727f3c89398fc3e2c53f7d9a052af538b2deb92012d0715642d9a7baeb9cf97

See more details on using hashes here.

File details

Details for the file redfish_service_validator-2.4.9-py3-none-any.whl.

File metadata

File hashes

Hashes for redfish_service_validator-2.4.9-py3-none-any.whl
Algorithm Hash digest
SHA256 e298b3ce0f3807b7e7e832a21fa30bf1823f3b89f71530ee01a3f0837b33dff1
MD5 9fc6fcf72cc5607b874bf441d51c0dad
BLAKE2b-256 70c2a9c1cb9936f945c05738891ec1f1c6a89b8486e5cf1228b946b53345920b

See more details on using hashes here.

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page