Skip to main content

Alternative regular expression module, to replace re.

Project description

Introduction

This new regex implementation is intended eventually to replace Python’s current re module implementation.

For testing and comparison with the current ‘re’ module the new implementation is in the form of a module called ‘regex’.

Old vs new behaviour

This module has 2 behaviours:

  • Version 0 behaviour (old behaviour, compatible with the current re module):

    • Indicated by the VERSION0 or V0 flag, or (?V0) in the pattern.

    • Zero-width matches are handled like in the re module:

      • .split won’t split a string at a zero-width match.

      • .sub will advance by one character after a zero-width match.

    • Inline flags apply to the entire pattern, and they can’t be turned off.

    • Only simple sets are supported.

    • Case-insensitive matches in Unicode use simple case-folding by default.

  • Version 1 behaviour (new behaviour, different from the current re module):

    • Indicated by the VERSION1 or V1 flag, or (?V1) in the pattern.

    • Zero-width matches are handled like in Perl and PCRE:

      • .split will split a string at a zero-width match.

      • .sub will handle zero-width matches correctly.

    • Inline flags apply to the end of the group or pattern, and they can be turned off.

    • Nested sets and set operations are supported.

    • Case-insensitive matches in Unicode use full case-folding by default.

If no version is specified, the regex module will default to regex.DEFAULT_VERSION. In the short term this will be VERSION0, but in the longer term it will be VERSION1.

Case-insensitive matches in Unicode

The regex module supports both simple and full case-folding for case-insensitive matches in Unicode. Use of full case-folding can be turned on using the FULLCASE or F flag, or (?f) in the pattern. Please note that this flag affects how the IGNORECASE flag works; the FULLCASE flag itself does not turn on case-insensitive matching.

In the version 0 behaviour, the flag is off by default.

In the version 1 behaviour, the flag is on by default.

Nested sets and set operations

It’s not possible to support both simple sets, as used in the re module, and nested sets at the same time because of a difference in the meaning of an unescaped "[" in a set.

For example, the pattern [[a-z]--[aeiou]] is treated in the version 0 behaviour (simple sets, compatible with the re module) as:

  • Set containing “[” and the letters “a” to “z”

  • Literal “–”

  • Set containing letters “a”, “e”, “i”, “o”, “u”

but in the version 1 behaviour (nested sets, enhanced behaviour) as:

  • Set which is:

    • Set containing the letters “a” to “z”

  • but excluding:

    • Set containing the letters “a”, “e”, “i”, “o”, “u”

Version 0 behaviour: only simple sets are supported.

Version 1 behaviour: nested sets and set operations are supported.

Flags

There are 2 kinds of flag: scoped and global. Scoped flags can apply to only part of a pattern and can be turned on or off; global flags apply to the entire pattern and can only be turned on.

The scoped flags are: FULLCASE, IGNORECASE, MULTILINE, DOTALL, VERBOSE, WORD.

The global flags are: ASCII, BESTMATCH, ENHANCEMATCH, LOCALE, POSIX, REVERSE, UNICODE, VERSION0, VERSION1.

If neither the ASCII, LOCALE nor UNICODE flag is specified, it will default to UNICODE if the regex pattern is a Unicode string and ASCII if it’s a bytestring.

The ENHANCEMATCH flag makes fuzzy matching attempt to improve the fit of the next match that it finds.

The BESTMATCH flag makes fuzzy matching search for the best match instead of the next match.

Notes on named capture groups

All capture groups have a group number, starting from 1.

Groups with the same group name will have the same group number, and groups with a different group name will have a different group number.

The same name can be used by more than one group, with later captures ‘overwriting’ earlier captures. All of the captures of the group will be available from the captures method of the match object.

Group numbers will be reused across different branches of a branch reset, eg. (?|(first)|(second)) has only group 1. If capture groups have different group names then they will, of course, have different group numbers, eg. (?|(?P<foo>first)|(?P<bar>second)) has group 1 (“foo”) and group 2 (“bar”).

In the regex (\s+)(?|(?P<foo>[A-Z]+)|(\w+) (?P<foo>[0-9]+) there are 2 groups:

  • (\s+) is group 1.

  • (?P<foo>[A-Z]+) is group 2, also called “foo”.

  • (\w+) is group 2 because of the branch reset.

  • (?P<foo>[0-9]+) is group 2 because it’s called “foo”.

If you want to prevent (\w+) from being group 2, you need to name it (different name, different group number).

Multithreading

The regex module releases the GIL during matching on instances of the built-in (immutable) string classes, enabling other Python threads to run concurrently. It is also possible to force the regex module to release the GIL during matching by calling the matching methods with the keyword argument concurrent=True. The behaviour is undefined if the string changes during matching, so use it only when it is guaranteed that that won’t happen.

Building for 64-bits

If the source files are built for a 64-bit target then the string positions will also be 64-bit.

Unicode

This module supports Unicode 9.0.

Full Unicode case-folding is supported.

Additional features

The issue numbers relate to the Python bug tracker, except where listed as “Hg issue”.

  • Fixed support for pickling compiled regexes (Hg issue 195)

  • Added support for lookaround in conditional pattern (Hg issue 163)

    The test of a conditional pattern can now be a lookaround.

    Examples:

    >>> regex.match(r'(?(?=\d)\d+|\w+)', '123abc')
    <regex.Match object; span=(0, 3), match='123'>
    >>> regex.match(r'(?(?=\d)\d+|\w+)', 'abc123')
    <regex.Match object; span=(0, 6), match='abc123'>

    This is not quite the same as putting a lookaround in the first branch of a pair of alternatives.

    Examples:

    >>> print(regex.match(r'(?:(?=\d)\d+\b|\w+)', '123abc'))
    <regex.Match object; span=(0, 6), match='123abc'>
    >>> print(regex.match(r'(?(?=\d)\d+\b|\w+)', '123abc'))
    None

    In the first example, the lookaround matched, but the remainder of the first branch failed to match, and so the second branch was attempted, whereas in the second example, the lookaround matched, and the first branch failed to match, but the second branch was not attempted.

  • Added POSIX matching (leftmost longest) (Hg issue 150)

    The POSIX standard for regex is to return the leftmost longest match. This can be turned on using the POSIX flag ((?p)).

    Examples:

    >>> # Normal matching.
    >>> regex.search(r'Mr|Mrs', 'Mrs')
    <regex.Match object; span=(0, 2), match='Mr'>
    >>> regex.search(r'one(self)?(selfsufficient)?', 'oneselfsufficient')
    <regex.Match object; span=(0, 7), match='oneself'>
    >>> # POSIX matching.
    >>> regex.search(r'(?p)Mr|Mrs', 'Mrs')
    <regex.Match object; span=(0, 3), match='Mrs'>
    >>> regex.search(r'(?p)one(self)?(selfsufficient)?', 'oneselfsufficient')
    <regex.Match object; span=(0, 17), match='oneselfsufficient'>

    Note that it will take longer to find matches because when it finds a match at a certain position, it won’t return that immediately, but will keep looking to see if there’s another longer match there.

  • Added (?(DEFINE)...) (Hg issue 152)

    If there’s no group called “DEFINE”, then … will be ignored, but any group definitions within it will be available.

    Examples:

    >>> regex.search(r'(?(DEFINE)(?P<quant>\d+)(?P<item>\w+))(?&quant) (?&item)', '5 elephants')
    <regex.Match object; span=(0, 11), match='5 elephants'>
  • Added (*PRUNE), (*SKIP) and (*FAIL) (Hg issue 153)

    (*PRUNE) discards the backtracking info up to that point. When used in an atomic group or a lookaround, it won’t affect the enclosing pattern.

    (*SKIP) is similar to (*PRUNE), except that it also sets where in the text the next attempt to match will start. When used in an atomic group or a lookaround, it won’t affect the enclosing pattern.

    (*FAIL) causes immediate backtracking. (*F) is a permitted abbreviation.

  • Added \K (Hg issue 151)

    Keeps the part of the entire match after the position where \K occurred; the part before it is discarded.

    It does not affect what capture groups return.

    Examples:

    >>> m = regex.search(r'(\w\w\K\w\w\w)', 'abcdef')
    >>> m[0]
    'cde'
    >>> m[1]
    'abcde'
    >>>
    >>> m = regex.search(r'(?r)(\w\w\K\w\w\w)', 'abcdef')
    >>> m[0]
    'bc'
    >>> m[1]
    'bcdef'
  • Added capture subscripting for expandf and subf/subfn (Hg issue 133) (Python 2.6 and above)

    You can now use subscripting to get the captures of a repeated capture group.

    Examples:

    >>> m = regex.match(r"(\w)+", "abc")
    >>> m.expandf("{1}")
    'c'
    >>> m.expandf("{1[0]} {1[1]} {1[2]}")
    'a b c'
    >>> m.expandf("{1[-1]} {1[-2]} {1[-3]}")
    'c b a'
    >>>
    >>> m = regex.match(r"(?P<letter>\w)+", "abc")
    >>> m.expandf("{letter}")
    'c'
    >>> m.expandf("{letter[0]} {letter[1]} {letter[2]}")
    'a b c'
    >>> m.expandf("{letter[-1]} {letter[-2]} {letter[-3]}")
    'c b a'
  • Added support for referring to a group by number using (?P=...).

    This is in addition to the existing \g<...>.

  • Fixed the handling of locale-sensitive regexes.

    The LOCALE flag is intended for legacy code and has limited support. You’re still recommended to use Unicode instead.

  • Added partial matches (Hg issue 102)

    A partial match is one that matches up to the end of string, but that string has been truncated and you want to know whether a complete match could be possible if the string had not been truncated.

    Partial matches are supported by match, search, fullmatch and finditer with the partial keyword argument.

    Match objects have a partial attribute, which is True if it’s a partial match.

    For example, if you wanted a user to enter a 4-digit number and check it character by character as it was being entered:

    >>> pattern = regex.compile(r'\d{4}')
    
    >>> # Initially, nothing has been entered:
    >>> print(pattern.fullmatch('', partial=True))
    <regex.Match object; span=(0, 0), match='', partial=True>
    
    >>> # An empty string is OK, but it's only a partial match.
    >>> # The user enters a letter:
    >>> print(pattern.fullmatch('a', partial=True))
    None
    >>> # It'll never match.
    
    >>> # The user deletes that and enters a digit:
    >>> print(pattern.fullmatch('1', partial=True))
    <regex.Match object; span=(0, 1), match='1', partial=True>
    >>> # It matches this far, but it's only a partial match.
    
    >>> # The user enters 2 more digits:
    >>> print(pattern.fullmatch('123', partial=True))
    <regex.Match object; span=(0, 3), match='123', partial=True>
    >>> # It matches this far, but it's only a partial match.
    
    >>> # The user enters another digit:
    >>> print(pattern.fullmatch('1234', partial=True))
    <regex.Match object; span=(0, 4), match='1234'>
    >>> # It's a complete match.
    
    >>> # If the user enters another digit:
    >>> print(pattern.fullmatch('12345', partial=True))
    None
    >>> # It's no longer a match.
    
    >>> # This is a partial match:
    >>> pattern.match('123', partial=True).partial
    True
    
    >>> # This is a complete match:
    >>> pattern.match('1233', partial=True).partial
    False
  • * operator not working correctly with sub() (Hg issue 106)

    Sometimes it’s not clear how zero-width matches should be handled. For example, should .* match 0 characters directly after matching >0 characters?

    Most regex implementations follow the lead of Perl (PCRE), but the re module sometimes doesn’t. The Perl behaviour appears to be the most common (and the re module is sometimes definitely wrong), so in version 1 the regex module follows the Perl behaviour, whereas in version 0 it follows the legacy re behaviour.

    Examples:

    >>> # Version 0 behaviour (like re)
    >>> regex.sub('(?V0).*', 'x', 'test')
    'x'
    >>> regex.sub('(?V0).*?', '|', 'test')
    '|t|e|s|t|'
    
    >>> # Version 1 behaviour (like Perl)
    >>> regex.sub('(?V1).*', 'x', 'test')
    'xx'
    >>> regex.sub('(?V1).*?', '|', 'test')
    '|||||||||'
  • re.group() should never return a bytearray (issue #18468)

    For compatibility with the re module, the regex module returns all matching bytestrings as bytes, starting from Python 3.4.

    Examples:

    >>> # Python 3.4 and later
    >>> regex.match(b'.', bytearray(b'a')).group()
    b'a'
    
    >>> # Python 3.1-3.3
    >>> regex.match(b'.', bytearray(b'a')).group()
    bytearray(b'a')
  • Added capturesdict (Hg issue 86)

    capturesdict is a combination of groupdict and captures:

    groupdict returns a dict of the named groups and the last capture of those groups.

    captures returns a list of all the captures of a group

    capturesdict returns a dict of the named groups and lists of all the captures of those groups.

    Examples:

    >>> m = regex.match(r"(?:(?P<word>\w+) (?P<digits>\d+)\n)+", "one 1\ntwo 2\nthree 3\n")
    >>> m.groupdict()
    {'word': 'three', 'digits': '3'}
    >>> m.captures("word")
    ['one', 'two', 'three']
    >>> m.captures("digits")
    ['1', '2', '3']
    >>> m.capturesdict()
    {'word': ['one', 'two', 'three'], 'digits': ['1', '2', '3']}
  • Allow duplicate names of groups (Hg issue 87)

    Group names can now be duplicated.

    Examples:

    >>> # With optional groups:
    >>>
    >>> # Both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", "first or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['first', 'second']
    >>> # Only the second group captures.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", " or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['second']
    >>> # Only the first group captures.
    >>> m = regex.match(r"(?P<item>\w+)? or (?P<item>\w+)?", "first or ")
    >>> m.group("item")
    'first'
    >>> m.captures("item")
    ['first']
    >>>
    >>> # With mandatory groups:
    >>>
    >>> # Both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)?", "first or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['first', 'second']
    >>> # Again, both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)", " or second")
    >>> m.group("item")
    'second'
    >>> m.captures("item")
    ['', 'second']
    >>> # And yet again, both groups capture, the second capture 'overwriting' the first.
    >>> m = regex.match(r"(?P<item>\w*) or (?P<item>\w*)", "first or ")
    >>> m.group("item")
    ''
    >>> m.captures("item")
    ['first', '']
  • Added fullmatch (issue #16203)

    fullmatch behaves like match, except that it must match all of the string.

    Examples:

    >>> print(regex.fullmatch(r"abc", "abc").span())
    (0, 3)
    >>> print(regex.fullmatch(r"abc", "abcx"))
    None
    >>> print(regex.fullmatch(r"abc", "abcx", endpos=3).span())
    (0, 3)
    >>> print(regex.fullmatch(r"abc", "xabcy", pos=1, endpos=4).span())
    (1, 4)
    >>>
    >>> regex.match(r"a.*?", "abcd").group(0)
    'a'
    >>> regex.fullmatch(r"a.*?", "abcd").group(0)
    'abcd'
  • Added subf and subfn (Python 2.6 and above)

    subf and subfn are alternatives to sub and subn respectively. When passed a replacement string, they treat it as a format string.

    Examples:

    >>> regex.subf(r"(\w+) (\w+)", "{0} => {2} {1}", "foo bar")
    'foo bar => bar foo'
    >>> regex.subf(r"(?P<word1>\w+) (?P<word2>\w+)", "{word2} {word1}", "foo bar")
    'bar foo'
  • Added expandf to match object (Python 2.6 and above)

    expandf is an alternative to expand. When passed a replacement string, it treats it as a format string.

    Examples:

    >>> m = regex.match(r"(\w+) (\w+)", "foo bar")
    >>> m.expandf("{0} => {2} {1}")
    'foo bar => bar foo'
    >>>
    >>> m = regex.match(r"(?P<word1>\w+) (?P<word2>\w+)", "foo bar")
    >>> m.expandf("{word2} {word1}")
    'bar foo'
  • Detach searched string

    A match object contains a reference to the string that was searched, via its string attribute. The match object now has a detach_string method that will ‘detach’ that string, making it available for garbage collection (this might save valuable memory if that string is very large).

    Example:

    >>> m = regex.search(r"\w+", "Hello world")
    >>> print(m.group())
    Hello
    >>> print(m.string)
    Hello world
    >>> m.detach_string()
    >>> print(m.group())
    Hello
    >>> print(m.string)
    None
  • Characters in a group name (issue #14462)

    A group name can now contain the same characters as an identifier. These are different in Python 2 and Python 3.

  • Recursive patterns (Hg issue 27)

    Recursive and repeated patterns are supported.

    (?R) or (?0) tries to match the entire regex recursively. (?1), (?2), etc, try to match the relevant capture group.

    (?&name) tries to match the named capture group.

    Examples:

    >>> regex.match(r"(Tarzan|Jane) loves (?1)", "Tarzan loves Jane").groups()
    ('Tarzan',)
    >>> regex.match(r"(Tarzan|Jane) loves (?1)", "Jane loves Tarzan").groups()
    ('Jane',)
    
    >>> m = regex.search(r"(\w)(?:(?R)|(\w?))\1", "kayak")
    >>> m.group(0, 1, 2)
    ('kayak', 'k', None)

    The first two examples show how the subpattern within the capture group is reused, but is _not_ itself a capture group. In other words, "(Tarzan|Jane) loves (?1)" is equivalent to "(Tarzan|Jane) loves (?:Tarzan|Jane)".

    It’s possible to backtrack into a recursed or repeated group.

    You can’t call a group if there is more than one group with that group name or group number ("ambiguous group reference"). For example, (?P<foo>\w+) (?P<foo>\w+) (?&foo)? has 2 groups called “foo” (both group 1) and (?|([A-Z]+)|([0-9]+)) (?1)? has 2 groups with group number 1.

    The alternative forms (?P>name) and (?P&name) are also supported.

  • repr(regex) doesn’t include actual regex (issue #13592)

    The repr of a compiled regex is now in the form of a eval-able string. For example:

    >>> r = regex.compile("foo", regex.I)
    >>> repr(r)
    "regex.Regex('foo', flags=regex.I | regex.V0)"
    >>> r
    regex.Regex('foo', flags=regex.I | regex.V0)

    The regex module has Regex as an alias for the ‘compile’ function.

  • Improve the repr for regular expression match objects (issue #17087)

    The repr of a match object is now a more useful form. For example:

    >>> regex.search(r"\d+", "abc012def")
    <regex.Match object; span=(3, 6), match='012'>
  • Python lib re cannot handle Unicode properly due to narrow/wide bug (issue #12729)

    The source code of the regex module has been updated to support PEP 393 (“Flexible String Representation”), which is new in Python 3.3.

  • Full Unicode case-folding is supported.

    In version 1 behaviour, the regex module uses full case-folding when performing case-insensitive matches in Unicode.

    Examples (in Python 3):

    >>> regex.match(r"(?iV1)strasse", "stra\N{LATIN SMALL LETTER SHARP S}e").span()
    (0, 6)
    >>> regex.match(r"(?iV1)stra\N{LATIN SMALL LETTER SHARP S}e", "STRASSE").span()
    (0, 7)

    In version 0 behaviour, it uses simple case-folding for backward compatibility with the re module.

  • Approximate “fuzzy” matching (Hg issue 12, Hg issue 41, Hg issue 109)

    Regex usually attempts an exact match, but sometimes an approximate, or “fuzzy”, match is needed, for those cases where the text being searched may contain errors in the form of inserted, deleted or substituted characters.

    A fuzzy regex specifies which types of errors are permitted, and, optionally, either the minimum and maximum or only the maximum permitted number of each type. (You cannot specify only a minimum.)

    The 3 types of error are:

    • Insertion, indicated by “i”

    • Deletion, indicated by “d”

    • Substitution, indicated by “s”

    In addition, “e” indicates any type of error.

    The fuzziness of a regex item is specified between “{” and “}” after the item.

    Examples:

    • foo match “foo” exactly

    • (?:foo){i} match “foo”, permitting insertions

    • (?:foo){d} match “foo”, permitting deletions

    • (?:foo){s} match “foo”, permitting substitutions

    • (?:foo){i,s} match “foo”, permitting insertions and substitutions

    • (?:foo){e} match “foo”, permitting errors

    If a certain type of error is specified, then any type not specified will not be permitted.

    In the following examples I’ll omit the item and write only the fuzziness:

    • {i<=3} permit at most 3 insertions, but no other types

    • {d<=3} permit at most 3 deletions, but no other types

    • {s<=3} permit at most 3 substitutions, but no other types

    • {i<=1,s<=2} permit at most 1 insertion and at most 2 substitutions, but no deletions

    • {e<=3} permit at most 3 errors

    • {1<=e<=3} permit at least 1 and at most 3 errors

    • {i<=2,d<=2,e<=3} permit at most 2 insertions, at most 2 deletions, at most 3 errors in total, but no substitutions

    It’s also possible to state the costs of each type of error and the maximum permitted total cost.

    Examples:

    • {2i+2d+1s<=4} each insertion costs 2, each deletion costs 2, each substitution costs 1, the total cost must not exceed 4

    • {i<=1,d<=1,s<=1,2i+2d+1s<=4} at most 1 insertion, at most 1 deletion, at most 1 substitution; each insertion costs 2, each deletion costs 2, each substitution costs 1, the total cost must not exceed 4

    You can also use “<” instead of “<=” if you want an exclusive minimum or maximum:

    • {e<=3} permit up to 3 errors

    • {e<4} permit fewer than 4 errors

    • {0<e<4} permit more than 0 but fewer than 4 errors

    By default, fuzzy matching searches for the first match that meets the given constraints. The ENHANCEMATCH flag will cause it to attempt to improve the fit (i.e. reduce the number of errors) of the match that it has found.

    The BESTMATCH flag will make it search for the best match instead.

    Further examples to note:

    • regex.search("(dog){e}", "cat and dog")[1] returns "cat" because that matches "dog" with 3 errors, which is within the limit (an unlimited number of errors is permitted).

    • regex.search("(dog){e<=1}", "cat and dog")[1] returns " dog" (with a leading space) because that matches "dog" with 1 error, which is within the limit (1 error is permitted).

    • regex.search("(?e)(dog){e<=1}", "cat and dog")[1] returns "dog" (without a leading space) because the fuzzy search matches " dog" with 1 error, which is within the limit (1 error is permitted), and the (?e) then makes it attempt a better fit.

    In the first two examples there are perfect matches later in the string, but in neither case is it the first possible match.

    The match object has an attribute fuzzy_counts which gives the total number of substitutions, insertions and deletions.

    >>> # A 'raw' fuzzy match:
    >>> regex.fullmatch(r"(?:cats|cat){e<=1}", "cat").fuzzy_counts
    (0, 0, 1)
    >>> # 0 substitutions, 0 insertions, 1 deletion.
    
    >>> # A better match might be possible if the ENHANCEMATCH flag used:
    >>> regex.fullmatch(r"(?e)(?:cats|cat){e<=1}", "cat").fuzzy_counts
    (0, 0, 0)
    >>> # 0 substitutions, 0 insertions, 0 deletions.
  • Named lists (Hg issue 11)

    \L<name>

    There are occasions where you may want to include a list (actually, a set) of options in a regex.

    One way is to build the pattern like this:

    >>> p = regex.compile(r"first|second|third|fourth|fifth")

    but if the list is large, parsing the resulting regex can take considerable time, and care must also be taken that the strings are properly escaped if they contain any character that has a special meaning in a regex, and that if there is a shorter string that occurs initially in a longer string that the longer string is listed before the shorter one, for example, “cats” before “cat”.

    The new alternative is to use a named list:

    >>> option_set = ["first", "second", "third", "fourth", "fifth"]
    >>> p = regex.compile(r"\L<options>", options=option_set)

    The order of the items is irrelevant, they are treated as a set. The named lists are available as the .named_lists attribute of the pattern object :

    >>> print(p.named_lists)
    {'options': frozenset({'second', 'fifth', 'fourth', 'third', 'first'})}
  • Start and end of word

    \m matches at the start of a word.

    \M matches at the end of a word.

    Compare with \b, which matches at the start or end of a word.

  • Unicode line separators

    Normally the only line separator is \n (\x0A), but if the WORD flag is turned on then the line separators are the pair \x0D\x0A, and \x0A, \x0B, \x0C and \x0D, plus \x85, \u2028 and \u2029 when working with Unicode.

    This affects the regex dot ".", which, with the DOTALL flag turned off, matches any character except a line separator. It also affects the line anchors ^ and $ (in multiline mode).

  • Set operators

    Version 1 behaviour only

    Set operators have been added, and a set [...] can include nested sets.

    The operators, in order of increasing precedence, are:

    • || for union (“x||y” means “x or y”)

    • ~~ (double tilde) for symmetric difference (“x~~y” means “x or y, but not both”)

    • && for intersection (“x&&y” means “x and y”)

    • -- (double dash) for difference (“x–y” means “x but not y”)

    Implicit union, ie, simple juxtaposition like in [ab], has the highest precedence. Thus, [ab&&cd] is the same as [[a||b]&&[c||d]].

    Examples:

    • [ab] # Set containing ‘a’ and ‘b’

    • [a-z] # Set containing ‘a’ .. ‘z’

    • [[a-z]--[qw]] # Set containing ‘a’ .. ‘z’, but not ‘q’ or ‘w’

    • [a-z--qw] # Same as above

    • [\p{L}--QW] # Set containing all letters except ‘Q’ and ‘W’

    • [\p{N}--[0-9]] # Set containing all numbers except ‘0’ .. ‘9’

    • [\p{ASCII}&&\p{Letter}] # Set containing all characters which are ASCII and letter

  • regex.escape (issue #2650)

    regex.escape has an additional keyword parameter special_only. When True, only ‘special’ regex characters, such as ‘?’, are escaped.

    Examples:

    >>> regex.escape("foo!?")
    'foo\\!\\?'
    >>> regex.escape("foo!?", special_only=True)
    'foo!\\?'
  • Repeated captures (issue #7132)

    A match object has additional methods which return information on all the successful matches of a repeated capture group. These methods are:

    • matchobject.captures([group1, ...])

      • Returns a list of the strings matched in a group or groups. Compare with matchobject.group([group1, ...]).

    • matchobject.starts([group])

      • Returns a list of the start positions. Compare with matchobject.start([group]).

    • matchobject.ends([group])

      • Returns a list of the end positions. Compare with matchobject.end([group]).

    • matchobject.spans([group])

      • Returns a list of the spans. Compare with matchobject.span([group]).

    Examples:

    >>> m = regex.search(r"(\w{3})+", "123456789")
    >>> m.group(1)
    '789'
    >>> m.captures(1)
    ['123', '456', '789']
    >>> m.start(1)
    6
    >>> m.starts(1)
    [0, 3, 6]
    >>> m.end(1)
    9
    >>> m.ends(1)
    [3, 6, 9]
    >>> m.span(1)
    (6, 9)
    >>> m.spans(1)
    [(0, 3), (3, 6), (6, 9)]
  • Atomic grouping (issue #433030)

    (?>...)

    If the following pattern subsequently fails, then the subpattern as a whole will fail.

  • Possessive quantifiers.

    (?:...)?+ ; (?:...)*+ ; (?:...)++ ; (?:...){min,max}+

    The subpattern is matched up to ‘max’ times. If the following pattern subsequently fails, then all of the repeated subpatterns will fail as a whole. For example, (?:...)++ is equivalent to (?>(?:...)+).

  • Scoped flags (issue #433028)

    (?flags-flags:...)

    The flags will apply only to the subpattern. Flags can be turned on or off.

  • Inline flags (issue #433024, issue #433027)

    (?flags-flags)

    Version 0 behaviour: the flags apply to the entire pattern, and they can’t be turned off.

    Version 1 behaviour: the flags apply to the end of the group or pattern, and they can be turned on or off.

  • Repeated repeats (issue #2537)

    A regex like ((x|y+)*)* will be accepted and will work correctly, but should complete more quickly.

  • Definition of ‘word’ character (issue #1693050)

    The definition of a ‘word’ character has been expanded for Unicode. It now conforms to the Unicode specification at http://www.unicode.org/reports/tr29/. This applies to \w, \W, \b and \B.

  • Groups in lookahead and lookbehind (issue #814253)

    Groups and group references are permitted in both lookahead and lookbehind.

  • Variable-length lookbehind

    A lookbehind can match a variable-length string.

  • Correct handling of charset with ignore case flag (issue #3511)

    Ranges within charsets are handled correctly when the ignore-case flag is turned on.

  • Unmatched group in replacement (issue #1519638)

    An unmatched group is treated as an empty string in a replacement template.

  • ‘Pathological’ patterns (issue #1566086, issue #1662581, issue #1448325, issue #1721518, issue #1297193)

    ‘Pathological’ patterns should complete more quickly.

  • Flags argument for regex.split, regex.sub and regex.subn (issue #3482)

    regex.split, regex.sub and regex.subn support a ‘flags’ argument.

  • Pos and endpos arguments for regex.sub and regex.subn

    regex.sub and regex.subn support ‘pos’ and ‘endpos’ arguments.

  • ‘Overlapped’ argument for regex.findall and regex.finditer

    regex.findall and regex.finditer support an ‘overlapped’ flag which permits overlapped matches.

  • Unicode escapes (issue #3665)

    The Unicode escapes \uxxxx and \Uxxxxxxxx are supported.

  • Large patterns (issue #1160)

    Patterns can be much larger.

  • Zero-width match with regex.finditer (issue #1647489)

    regex.finditer behaves correctly when it splits at a zero-width match.

  • Zero-width split with regex.split (issue #3262)

    Version 0 behaviour: a string won’t be split at a zero-width match.

    Version 1 behaviour: a string will be split at a zero-width match.

  • Splititer

    regex.splititer has been added. It’s a generator equivalent of regex.split.

  • Subscripting for groups

    A match object accepts access to the captured groups via subscripting and slicing:

    >>> m = regex.search(r"(?P<before>.*?)(?P<num>\d+)(?P<after>.*)", "pqr123stu")
    >>> print m["before"]
    pqr
    >>> print m["num"]
    123
    >>> print m["after"]
    stu
    >>> print len(m)
    4
    >>> print m[:]
    ('pqr123stu', 'pqr', '123', 'stu')
  • Named groups

    Groups can be named with (?<name>...) as well as the current (?P<name>...).

  • Group references

    Groups can be referenced within a pattern with \g<name>. This also allows there to be more than 99 groups.

  • Named characters

    \N{name}

    Named characters are supported. (Note: only those known by Python’s Unicode database are supported.)

  • Unicode codepoint properties, including scripts and blocks

    \p{property=value}; \P{property=value}; \p{value} ; \P{value}

    Many Unicode properties are supported, including blocks and scripts. \p{property=value} or \p{property:value} matches a character whose property property has value value. The inverse of \p{property=value} is \P{property=value} or \p{^property=value}.

    If the short form \p{value} is used, the properties are checked in the order: General_Category, Script, Block, binary property:

    • Latin, the ‘Latin’ script (Script=Latin).

    • Cyrillic, the ‘Cyrillic’ script (Script=Cyrillic).

    • BasicLatin, the ‘BasicLatin’ block (Block=BasicLatin).

    • Alphabetic, the ‘Alphabetic’ binary property (Alphabetic=Yes).

    A short form starting with Is indicates a script or binary property:

    • IsLatin, the ‘Latin’ script (Script=Latin).

    • IsCyrillic, the ‘Cyrillic’ script (Script=Cyrillic).

    • IsAlphabetic, the ‘Alphabetic’ binary property (Alphabetic=Yes).

    A short form starting with In indicates a block property:

    • InBasicLatin, the ‘BasicLatin’ block (Block=BasicLatin).

    • InCyrillic, the ‘Cyrillic’ block (Block=Cyrillic).

  • POSIX character classes

    [[:alpha:]]; [[:^alpha:]]

    POSIX character classes are supported. These are normally treated as an alternative form of \p{...}.

    The exceptions are alnum, digit, punct and xdigit, whose definitions are different from those of Unicode.

    [[:alnum:]] is equivalent to \p{posix_alnum}.

    [[:digit:]] is equivalent to \p{posix_digit}.

    [[:punct:]] is equivalent to \p{posix_punct}.

    [[:xdigit:]] is equivalent to \p{posix_xdigit}.

  • Search anchor

    \G

    A search anchor has been added. It matches at the position where each search started/continued and can be used for contiguous matches or in negative variable-length lookbehinds to limit how far back the lookbehind goes:

    >>> regex.findall(r"\w{2}", "abcd ef")
    ['ab', 'cd', 'ef']
    >>> regex.findall(r"\G\w{2}", "abcd ef")
    ['ab', 'cd']
    • The search starts at position 0 and matches 2 letters ‘ab’.

    • The search continues at position 2 and matches 2 letters ‘cd’.

    • The search continues at position 4 and fails to match any letters.

    • The anchor stops the search start position from being advanced, so there are no more results.

  • Reverse searching

    Searches can now work backwards:

    >>> regex.findall(r".", "abc")
    ['a', 'b', 'c']
    >>> regex.findall(r"(?r).", "abc")
    ['c', 'b', 'a']

    Note: the result of a reverse search is not necessarily the reverse of a forward search:

    >>> regex.findall(r"..", "abcde")
    ['ab', 'cd']
    >>> regex.findall(r"(?r)..", "abcde")
    ['de', 'bc']
  • Matching a single grapheme

    \X

    The grapheme matcher is supported. It now conforms to the Unicode specification at http://www.unicode.org/reports/tr29/.

  • Branch reset

    (?|...|...)

    Capture group numbers will be reused across the alternatives, but groups with different names will have different group numbers.

    Examples:

    >>> regex.match(r"(?|(first)|(second))", "first").groups()
    ('first',)
    >>> regex.match(r"(?|(first)|(second))", "second").groups()
    ('second',)

    Note that there is only one group.

  • Default Unicode word boundary

    The WORD flag changes the definition of a ‘word boundary’ to that of a default Unicode word boundary. This applies to \b and \B.

  • SRE engine do not release the GIL (issue #1366311)

    The regex module can release the GIL during matching (see the above section on multithreading).

    Iterators can be safely shared across threads.

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

regex-2016.12.27.tar.gz (599.5 kB view details)

Uploaded Source

Built Distributions

regex-2016.12.27-cp36-none-win_amd64.whl (242.3 kB view details)

Uploaded CPython 3.6Windows x86-64

regex-2016.12.27-cp36-none-win32.whl (236.7 kB view details)

Uploaded CPython 3.6Windows x86

regex-2016.12.27-cp35-none-win_amd64.whl (242.3 kB view details)

Uploaded CPython 3.5Windows x86-64

regex-2016.12.27-cp35-none-win32.whl (236.7 kB view details)

Uploaded CPython 3.5Windows x86

regex-2016.12.27-cp34-none-win_amd64.whl (242.4 kB view details)

Uploaded CPython 3.4Windows x86-64

regex-2016.12.27-cp34-none-win32.whl (236.7 kB view details)

Uploaded CPython 3.4Windows x86

regex-2016.12.27-cp33-none-win_amd64.whl (242.4 kB view details)

Uploaded CPython 3.3Windows x86-64

regex-2016.12.27-cp33-none-win32.whl (236.5 kB view details)

Uploaded CPython 3.3Windows x86

regex-2016.12.27-cp32-none-win_amd64.whl (241.5 kB view details)

Uploaded CPython 3.2Windows x86-64

regex-2016.12.27-cp32-none-win32.whl (235.5 kB view details)

Uploaded CPython 3.2Windows x86

regex-2016.12.27-cp31-none-win_amd64.whl (241.5 kB view details)

Uploaded CPython 3.1Windows x86-64

regex-2016.12.27-cp31-none-win32.whl (235.6 kB view details)

Uploaded CPython 3.1Windows x86

regex-2016.12.27-cp27-none-win_amd64.whl (241.5 kB view details)

Uploaded CPython 2.7Windows x86-64

regex-2016.12.27-cp27-none-win32.whl (235.5 kB view details)

Uploaded CPython 2.7Windows x86

regex-2016.12.27-cp26-none-win_amd64.whl (241.5 kB view details)

Uploaded CPython 2.6Windows x86-64

regex-2016.12.27-cp26-none-win32.whl (235.5 kB view details)

Uploaded CPython 2.6Windows x86

regex-2016.12.27-cp25-none-win_amd64.whl (239.6 kB view details)

Uploaded CPython 2.5Windows x86-64

regex-2016.12.27-cp25-none-win32.whl (234.1 kB view details)

Uploaded CPython 2.5Windows x86

File details

Details for the file regex-2016.12.27.tar.gz.

File metadata

  • Download URL: regex-2016.12.27.tar.gz
  • Upload date:
  • Size: 599.5 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No

File hashes

Hashes for regex-2016.12.27.tar.gz
Algorithm Hash digest
SHA256 16a3b467407a42f848751bc11462d42fe5e8d2b9882af51888faec91aea141bb
MD5 abc75651fd27587fb2eebae4aae11254
BLAKE2b-256 68a7e33eb93fd6f8f914c9abd1ec7ddaea9a17ce5c412925ad98e266beacf911

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp36-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp36-none-win_amd64.whl
Algorithm Hash digest
SHA256 2b8e81bd21e26679a81eeb44509c2cd26866f681c497bdaef977472ae5634b0c
MD5 3798d7be8132464d2f9095646656f118
BLAKE2b-256 b639329495f375a895b2fa05e387e0d404ad5db3cc0e8626dcceeb0ed86fefcc

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp36-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp36-none-win32.whl
Algorithm Hash digest
SHA256 3ac9dae8b7a404b1c896d151358f8c222882d72eab4c9cd38a029c5bdf7cea3b
MD5 73ee1669e778cfe8ff42d0cf6f657ce9
BLAKE2b-256 aec906f6489beda20806ee21d4d56d4885d34dc3aa4165bce3cd89191c53ebcb

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp35-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp35-none-win_amd64.whl
Algorithm Hash digest
SHA256 837b0e6632b8bf132072ee848e32d292182ce449c5a5a77779cead5f0e7fc537
MD5 b6f5cce7347bac2057aec279f7aa3440
BLAKE2b-256 f2e4ec51605b1c5ca81962d2027c89ab2303dfba9584fb6fa2862947a6537861

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp35-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp35-none-win32.whl
Algorithm Hash digest
SHA256 6fed42d0b255cbdc13637afe3bfdaa15e1d9dbba0077843feff28ad3c3205b52
MD5 4e3ce54836533e97ecea3c76efbd7ee0
BLAKE2b-256 16b678e1234586fc8750e29ad0318877b55be38bd15c3ee41b13e81ed97fd227

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp34-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp34-none-win_amd64.whl
Algorithm Hash digest
SHA256 da9963cc8259c80a1702d2bb612505c271652070414475a96fb48974125257c0
MD5 6df1d5f63f212d3c0a4f10a2af38e30d
BLAKE2b-256 c6055dc76540b4ce9b27232c7cbb0672cc6cb1ccbbd87a6b6f5bd86c219061cc

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp34-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp34-none-win32.whl
Algorithm Hash digest
SHA256 c7368655eef9affb4d332722aacdea47934714adc003a086aa01957b6eeb0aee
MD5 172659219e8d7376d412134ae4042365
BLAKE2b-256 5dcd6374fed203ab1f386b878726ac2eb1349e8a1373122610dc4a799ca9c567

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp33-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp33-none-win_amd64.whl
Algorithm Hash digest
SHA256 527b04b1ea8c4611cc3cc2eff8eb2ebb4fed38e8a5a3daf4b60be5daa60c8437
MD5 759bf64308672d62028c1d928a56db57
BLAKE2b-256 57b02948230ebcb649ec035b021abc87f9a1ce20dcbc6291dbc1b3dcde4806e4

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp33-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp33-none-win32.whl
Algorithm Hash digest
SHA256 4a01be8cdc7992304b620b793e96de2d2dbaa6c67e3e9015603e5bd25f3192c7
MD5 84c8828b78310efe529816cb98ac89a0
BLAKE2b-256 23b222bd0ab3c2d15bb4eb4559f7eb5e241677446b80676d14a0d1cadf869027

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp32-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp32-none-win_amd64.whl
Algorithm Hash digest
SHA256 eba64a37ec4f76d82efe59c079bda7ff4209511fa132fc4e052b0db833034faa
MD5 16d5d9a180cf033d4c8cfec2c5628e59
BLAKE2b-256 f21043ec4817657c5a7161212cd3f5c051c293f9ef40a778c081c516eca90f8e

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp32-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp32-none-win32.whl
Algorithm Hash digest
SHA256 7f3db85c08a6d4c577261c4f8dc9a7ffec48e5e5d875dad163020bc88d943941
MD5 eb05332fd026a16bf8420e2a57428c56
BLAKE2b-256 f56ac5900bb7bdebe11d59ad5990004c28c0514d5465d06b1ef689d3fe2b4376

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp31-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp31-none-win_amd64.whl
Algorithm Hash digest
SHA256 8b962a1ebd93c8aa4887e4c4668ac5b6ae86593abc71408b0af86166e31b826a
MD5 fee1d50e75993db8c6382fd8e64b0be5
BLAKE2b-256 de9fb5a9c7f44ed521ad68fe99f890ed10b89f3116f8914a3d8a30d02ccd68f9

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp31-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp31-none-win32.whl
Algorithm Hash digest
SHA256 74b839a88473d7c55dd8d07de2ae3ea04c5bd0a5ce1e795fc1264213040d626b
MD5 68b48cff3fb7b19d75a66dae0b1d0308
BLAKE2b-256 9566988fcd8bd01480b95cc21dfd8543adaa3bb52d3eb26f48a5be1d39709661

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp27-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp27-none-win_amd64.whl
Algorithm Hash digest
SHA256 2f3db4b4d8974a39f5da0d699ca2c9021812889d79ccff2b72cc36a27e381fda
MD5 fce8a7cbceab4e1f77273b10d0485231
BLAKE2b-256 ed9094e80e53cf17b9db78ac0f6b1f28f6a58b2ed042867c5017d743038399d0

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp27-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp27-none-win32.whl
Algorithm Hash digest
SHA256 13bd8d25c7399a3b5ce9cd186b88b4bb01104f799ba7c30dbb0818536fcdee80
MD5 9273e9f91f7e4c2020c083e2d3d3e56f
BLAKE2b-256 07a35739256d6b3774b203bafaba61c71ed3385937b978124d72b249d675fda2

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp26-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp26-none-win_amd64.whl
Algorithm Hash digest
SHA256 ad6162e5b0dbffd43a86c1365586aa00022629461cfcaa33646bbd2c71ee663a
MD5 2b0d67a14cd269011feb82ca743456f2
BLAKE2b-256 15799d4d40646ea8403dd354ef16a67f88c58f57dad54835cbdfc6e103ed65dd

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp26-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp26-none-win32.whl
Algorithm Hash digest
SHA256 b37c97f1db6a100e06e061eca76e8da6520923951801c139e84e2b774faa4f10
MD5 669b191f20346458842a937415a9c440
BLAKE2b-256 6feb821a69f2192cfe0792a39551599f2a8191980d6196987365975879b97ed4

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp25-none-win_amd64.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp25-none-win_amd64.whl
Algorithm Hash digest
SHA256 59d39d3f759bf30d994360602c604c979439830c1e7ea54f1208e60a72eddefa
MD5 80047ada8913c19c50fb8eb0f2847c17
BLAKE2b-256 ddce8bcfa31ea02b630b53bd03da06f2b7b70f17b41d9d6fed72ce4297e548d0

See more details on using hashes here.

File details

Details for the file regex-2016.12.27-cp25-none-win32.whl.

File metadata

File hashes

Hashes for regex-2016.12.27-cp25-none-win32.whl
Algorithm Hash digest
SHA256 771343e745aad0fc20216d89bfa48febf5ee6dc9acdb0d31dce8bee0279badf4
MD5 477ee413078b8a5243cca8076c7343ed
BLAKE2b-256 22fb0f29d91778eac8902e21de9811950f35c4e38c44a2158a137a1cd7a408e8

See more details on using hashes here.

Supported by

AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Pingdom Monitoring Sentry Error logging StatusPage Status page