rflink 0.0.30

Library and CLI tools for interacting with RFlink 433MHz transceiver.

Library and CLI tools for interacting with RFlink 433MHz transceiver.

http://www.nemcon.nl/blog2/

Installation

$ pip install rflink

Usage

$ rflink -h
Command line interface for rflink library.

Usage:
  rflink [-v | -vv] [options]
  rflink [-v | -vv] [options] [--repeat <repeat>] (on | off | allon | alloff) <id>
  rflink (-h | --help)
  rflink --version

Options:
  -p --port=<port>   Serial port to connect to [default: /dev/ttyACM0],
                       or TCP port in TCP mode.
  --baud=<baud>      Serial baud rate [default: 57600].
  --host=<host>      TCP mode, connect to host instead of serial port.
  --repeat=<repeat>  How often to repeat a command [default: 1].
  -m=<handling>      How to handle incoming packets [default: event].
  --ignore=<ignore>  List of device ids to ignore, end with * to match wildcard.
  -h --help          Show this screen.
  -v                 Increase verbosity
  --version          Show version.

Intercept and display Rflink packets:

$ rflink
rflink                           Nodo RadioFrequencyLink RFLink Gateway V1.1 R45
newkaku_00000001_4               off
newkaku_00000001_3               on
alectov1_0334_temp               7.4 °C
alectov1_0334_bat                low
alectov1_0334_hum                26 %

Turn a device on or off:

$ rflink on newkaku_0000_1
$ rflink off newkaku_0000_1

Use of TCP mode instead of serial port (eg: ESP8266 serial bridge):

$ rflink --host 1.2.3.4 --port 1234

Debug logging is shown in verbose mode for debugging:

$ rflink -vv
DEBUG:asyncio:Using selector: EpollSelector
DEBUG:rflink.protocol:connected
DEBUG:rflink.protocol:received data: 20;00;Nodo RadioFrequen
DEBUG:rflink.protocol:received data: cyLink - RFLink Gateway
DEBUG:rflink.protocol:received data: V1.1 - R45;
DEBUG:rflink.protocol:got packet: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R45;
DEBUG:rflink.protocol:decoded packet: {'revision': '45', 'node': 'gateway', 'version': '1.1', 'protocol': 'unknown', 'firmware': 'RFLink Gateway', 'hardware': 'Nodo RadioFrequencyLink'}
DEBUG:rflink.protocol:got event: {'version': '1.1', 'revision': '45', 'firmware': 'RFLink Gateway', 'hardware': 'Nodo RadioFrequencyLink', 'id': 'rflink'}
rflink                           Nodo RadioFrequencyLink RFLink Gateway V1.1 R45
DEBUG:rflink.protocol:received data: 2
DEBUG:rflink.protocol:received data: 0;01;NewKaku;ID=00000001
DEBUG:rflink.protocol:received data: ;SWITCH=4;CMD=OFF;
DEBUG:rflink.protocol:got packet: 20;01;NewKaku;ID=00000001;SWITCH=4;CMD=OFF;
DEBUG:rflink.protocol:decoded packet: {'id': '00000001', 'protocol': 'newkaku', 'command': 'off', 'switch': '4', 'node': 'gateway'}
DEBUG:rflink.protocol:got event: {'id': 'newkaku_00000001_4', 'command': 'off'}
newkaku_00000001_4               off