A library that renders impedance charts that include capacitance and inductance grids.
Project description
RLC Chart
 Author:
Ken Kundert
 Version:
0.0.0
 Released:
20210321
What?
rlc_chart is library that renders impedance charts in SVG with the normal impedance versus frequency loglog grids, but they also include capacitance and inductance grids. They can be used to directly read component values from a plot of impedance.
Consider the impedance of a capacitor that has series resistance and inductance parasitics along with a shunt resistor as represented by the following circuit:
You can use the various grids on this graph to determine the values of the various components: C = 1 nF, L = 10 μH, Rs = 2 Ω, Rp = 500 kΩ, and f₀ = 1.6 MHz. You can do this in other ways, but they involve manual calculation. In addition, an RLC chart is a convenient way of sharing or publishing your findings.
Using an RLC chart is often enough to allow you to build a linear model for common two terminal components.
How?
Here is an example of how to use rlc_chart:
from rlc_chart import RLC_Chart from math import log10 as log, pi as π fmin = 1 fmax = 1e8 zmin = 1 zmax = 1e6 mult = 10**((log(fmax)  log(fmin))/400) f = fmin freq = [] impedance = [] resistance = [] reactance = [] while(f <= 1.01*fmax): z1 = 2 + 1/(2j*π*f*1e9) + 2j*π*f*10.0e6 z2 = 5e5 z = z1 * z2 / (z1 + z2) freq += [f] impedance += [abs(z)] f *= mult with RLC_Chart('lcrchart.svg', fmin, fmax, zmin, zmax) as chart: chart.add_trace(freq, impedance)
Most of the code builds the two arrays that represent the trace. The impedance array is expected to contain real values. In this case it is the magnitude that is being plotted, though it is also common to call add_trace twice to show both the real and imaginary parts of the impedance.
If you use the Spectre circuit simulator, you can use psf_utils with rlc_chart to extract models from simulation results. For example, here is the model of an inductor given by its manufacturer:
subckt MCFE1412TR47_JB (1 2) R1 (1 7) resistor r=0.036 L5 (2 8) inductor l=20u C2 (7 8) capacitor c=10.6p R2 (8 2) resistor r=528 C1 (7 9) capacitor c=28.5p R5 (9 2) resistor r=3.7 L0 (7 3) inductor l=0.27u L1 (3 4) inductor l=0.07u L2 (4 2) inductor l=0.11u L3 (3 5) inductor l=0.39u L4 (4 6) inductor l=0.35u R3 (5 4) resistor r=3.02158381422266 R4 (6 2) resistor r=43.4532529473926 ends MCFE1412TR47_JB
This model is overly complicated and so expensive to simulate. It requires 13 extra unknowns that the simulator must compute (7 internal nodes and 6 inductor currents). The impedance of this subcircuit is extracted by grounding one end and driving the other with a 1 A magnitude AC source. Then, the RLC chart for this subcircuit can be generated with:
from psf_utils import PSF from inform import Error, os_error, fatal from rlc_chart import RLC_Chart try: psf = PSF('MCFE1412TR47_JB.ac') sweep = psf.get_sweep() z_ckt = psf.get_signal('1') z_mod = psf.get_signal('2') with RLC_Chart('MCFE1412TR47_JB.svg', 100, 1e9, 0.01, 1000) as chart: chart.add_trace(sweep.abscissa, abs(z_ckt.ordinate), stroke='red') chart.add_trace(sweep.abscissa, abs(z_mod.ordinate), stroke='green') with RLC_Chart('MCFE1412TR47_JB.rxz.svg', 100, 1e9, 0.01, 1000) as chart: chart.add_trace(sweep.abscissa, abs(z.ordinate.real), stroke='green') chart.add_trace(sweep.abscissa, abs(z.ordinate.imag), stroke='orange') chart.add_trace(sweep.abscissa, abs(z.ordinate.real), stroke='blue') chart.add_trace(sweep.abscissa, abs(z.ordinate.imag), stroke='red') except Error as e: e.terminate() except OSError as e: fatal(os_error(e))
The RLC chart shows that the above subcircuit can be replaced with:
subckt MCFE1412TR47_JB (1 2) L (2 2) inductor l=442.24nH r=36mOhm C (2 2) capacitor c=27.522pF R (2 2) resistor r=537.46_Ohm ends MCFE1412TR47_JB
This version only requires one additional unknown, the inductor current.
Here is the RLC chart of both showing the difference, which are inconsequential.
The differences are a bit more apparent if the real and imaginary components of the impedance are plotted separately.
The differences are significant only in the loss exhibited above resonance, which is usually not of concern.
The Details
RLC_Chart
The RLC_Chart class constructor takes the following required arguments:
 filename:
Path to the output SVG file.
 fmin:
The minimum frequency value (leftmost value on the chart). This value is always rounded down the next lower multiple of 10. So for example, if you give 25 Hz as fmin, then 10 Hz is used.
 fmax:
The maximum frequency value (rightmost value on the chart). This value is always rounded up the next higher multiple of 10. So for example, if you give 75 MHz as fmax, then 100 MHz is used.
 zmin:
 The minimum impedance value (bottommost value on the chart). This value is
always rounded down the next lower multiple of 10. So for example, if you give 150 mΩ zmin, then 100 mΩ is used.
 zmax:
The maximum impedance value (topmost value on the chart). This value is always rounded up the next higher multiple of 10. So for example, if you give 800 kΩ as zmax, then 1 MΩ is used.
In addition, the following keyword arguments are optional.
 axes:
Specifies which axes are desired, where the choices are f for frequency, z for impedance, c for capacitance, and l for inductance. axes is a string that contains any or all of the four characters, or not at all. If the characters are lower case, then only the major grid lines are drawn, and if given as upper case letters, both the major and minor grid lines are drawn. The visual clutter in the chart can be reduces by eliminating unneeded grid lines.
 trace_width:
The width of a trace. The default is 0.025 inches.
 trace_color:
The default color of the trace. You can use one of the named SVG colors, or you can use ‘rgb(R,G,B)’ where R, G, and B are integers between 0 and 255 that specify the intensity of red, blue, and green components of the color.
 major_line_width:
The width of a major division line. The default is 0.01 inches.
 minor_line_width:
The width of a minor division line. The default is 0.005 inches.
 outline_line_width:
The width of grid outline. The default is 0.015 inches.
 outline_line_color:
The color of the grid outline. The default is ‘black’.
 fz_grid_color:
The color of the frequency and impedance grid lines. The default is ‘grey’.
 cl_grid_color:
The color of the capacitance and inductance grid lines. The default is ‘grey’.
 background:
The background color of the grid. The default is ‘white’.
 minor_divs:
The minor divisions to include. The default is ‘123456789’. Other common values are ‘1’, ‘13’, ‘125’, and ‘12468’.
 decade:
The size of one decade square. The default is 1 inch. With this value, a grid that is 6 decades wide and 4 decades high is 6” by 4”.
 left_margin:
The size of the left margin. The default is 1 inch.
 right_margin:
The size of the right margin. The default is 1 inch.
 top_margin:
The size of the top margin. The default is 1 inch.
 bottom_margin:
The size of the bottom margin. The default is 1 inch.
 font_family:
The text font family. The default is “sansserif”.
 font_size:
The text font size. The default is 12.
 text_color:
The text color size. The default is “black”.
 text_offset:
The separation between the axis labels and the grid. The default is 0.15 inches.
 pixels_per_unit:
This is a scaling factor that allows you specify your dimensions to what every units you wish. A value of 96, the default, means that you are specifying your units in inches. A value of 37.8 allows you specify values in centimeters. Etc.
In addition, many SVG parameters can be passed into RLC_Chart, in which case they are simple passed on to svgwrite.
Generally, RLC_Chart is the argument of a with statement. If you choose not to do this, then you must explicitly call the close method yourself. Other than close, RLC_Chart provides one other method: add_trace.
add_trace()
This method adds a trace to the graph. It may be called multiple times to add additional traces. There are two required arguments:
 frequency:
An array of real values representing the frequency values of the points that when connected make up the trace.
 impedance:
An array of real values representing the impedance values of the points that when connected make up the trace.
Each of these arrays can be in the form of a Python list or a numpy array, and they must be the same length.
It is also possible to specify additional keyword aruments, which are passed on to svgwrite and attached to the trace. This can be used to specify trace color and style. For example, specify stroke to specify the trace color.
Labeling
The chart object returned by RLC_Chart is a svgwrite Drawing object, and so you can call its methods to add SVG features to your chart. This can be used to add labels to your charts. Here is an example that demonstrates how to add labels:
from rlc_chart import RLC_Chart from inform import fatal, os_error from pathlib import Path import csv fmin = 100 fmax = 10e9 zmin = 0.01 zmax = 1e6 frequency = [] impedance = [] ESR = [] try: contents = Path('C0603C102K3GACTU_imp_esr.csv').read_text() data = csv.DictReader(contents.splitlines(), delimiter=',') for row in data: frequency.append(float(row['Frequency'])) impedance.append(float(row['Impedance'])) ESR.append(float(row['ESR'])) with RLC_Chart('C0603C102K3GACTU.svg', fmin, fmax, zmin, zmax, axes='FZCL') as chart: chart.add_trace(frequency, impedance, stroke='red') chart.add_trace(frequency, ESR, stroke='blue') chart.add(chart.text( "1 nF", insert = (chart.to_x(150_000), chart.to_y(1_500)), font_size = 24, fill = 'black' )) chart.add(chart.text( "700 pH", insert = (chart.to_x(2_000_000_000), chart.to_y(10)), font_size = 24, fill = 'black', text_anchor = 'end', )) chart.add(chart.text( "20 mΩ", insert = (chart.to_x(175_000_000), chart.to_y(0.012)), font_size = 24, fill = 'black', text_anchor = 'middle', )) chart.add(chart.text( "C0603C102K3GACTU", insert = (chart.WIDTH/2, 36), font_size = 24, fill = 'black', text_anchor = 'middle', )) except OSError as e: fatal(os_error(e))
This example demonstrates two different ways to specify the location of the label. The chart object provides the to_x and to_y methods that convert data values into coordinates within the grid. This is used to add labels on the traces. The chart object also provides the HEIGHT and WIDTH attributes. These can be used to compute coordinates within the entire canvas. This is used to add a title that is near the top.
Project details
Release history Release notifications  RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Hashes for rlc_chart0.0.0py3noneany.whl
Algorithm  Hash digest  

SHA256  cedbfd548d0afdd1d0abbfe66ce2ca8715b7720654f25fbe5313a53d56ef8c29 

MD5  a9c32603516e4b554f156e87ea20c8b6 

BLAKE2b256  5331fde2d8247f3147fa82e80f7da923b89f94c26fe95e9e4d4a654e58b87976 