Skip to main content

Serial Attached SCSI (SAS) Linux utilities

Project description

sasutils is a set of command-line tools and a Python library to ease the administration of Serial Attached SCSI (SAS) fabrics. Supported Python Versions License

sasutils command-line tools

  • sas_devices

  • sas_discover

  • ses_report

Also, two “zeroconf” udev scripts for use in udev rules that create friendly device aliases using SES-2 subenclosure nicknames.

  • sas_mpath_snic_alias

  • sas_sd_snic_alias


Display SAS topology. By default, sas_discover tries to fold common devices (like disks). Use -v, -vv or -vvv and --addr to display more details.

$ sas_discover -v
|--host35 SAS9300-8e
|  `--8x--expander-35:0 ASTEK
|         |--1x--end_device-35:0:0
|         |      `--enclosure io1-sassw1 ASTEK
|         `--4x--expander-35:1 QCT
|            |-- 60 x end_device -- disk
|            `--  1 x end_device -- enclosure io1-jbod1-0 QCT
`--host36 SAS9300-8e
   `--8x--expander-36:0 ASTEK
          |      `--enclosure io1-sassw2 ASTEK
          `--4x--expander-36:1 QCT
             |-- 60 x end_device -- disk
             `--  1 x end_device -- enclosure io1-jbod1-1 QCT


Zeroconf tool that scans SAS devices and resolves associated enclosures. Useful to quickly check cabling and hardware setup.

When used with -v, sas_devices will also display all disk devices with serial numbers.

The following example shows a proper detection of a 60-disk JBOD with 2 SIMs (an “enclosure group”).

$ sas_devices
Found 2 SAS hosts
Found 4 SAS expanders
Found 1 enclosure groups
Enclosure group: [io1-jbod1-0][io1-jbod1-1]
NUM         VENDOR        MODEL    REV  PATHS
 60 x      SEAGATE ST8000NM0075   E002      2
Total: 60 block devices in enclosure group


SES status and environmental metrics.

Used with -c, this command will find all enclosures and then use SES-2 nicknames and use sg_ses to output results suitable for Carbon/Graphite.

$ ses_report -c --prefix=datacenter.stanford
datacenter.stanford.io1-sassw1.Cooling.Left_Fan.speed_rpm 19560 1476486766
datacenter.stanford.io1-sassw1.Cooling.Right_Fan.speed_rpm 19080 1476486766
datacenter.stanford.io1-sassw1.Cooling.Center_Fan.speed_rpm 19490 1476486766

Use -s to get the status of all detected SES Element Descriptors.

# ses_report -s --prefix=datacenter.stanford | grep SIM
datacenter.stanford.io1-jbod1-0.Enclosure_services_controller_electronics.SIM_00 OK
datacenter.stanford.io1-jbod1-0.Enclosure_services_controller_electronics.SIM_01 OK
datacenter.stanford.io1-jbod1-0.SAS_expander.SAS_Expander_SIM_0 OK
datacenter.stanford.io1-jbod1-0.SAS_expander.SAS_Expander_ISIM_2 OK
datacenter.stanford.io1-jbod1-0.SAS_expander.SAS_Expander_ISIM_0 OK
datacenter.stanford.io1-jbod1-1.Enclosure_services_controller_electronics.SIM_00 OK
datacenter.stanford.io1-jbod1-1.Enclosure_services_controller_electronics.SIM_01 OK
datacenter.stanford.io1-jbod1-1.SAS_expander.SAS_Expander_SIM_1 OK
datacenter.stanford.io1-jbod1-1.SAS_expander.SAS_Expander_ISIM_3 OK
datacenter.stanford.io1-jbod1-1.SAS_expander.SAS_Expander_ISIM_1 OK


Generate udev aliases using the SES-2 subenclosure nickname and bay identifier of each device.

For example, add the following to your udev rules:

KERNEL=="sd*", PROGRAM="/usr/bin/sas_sd_snic_alias %k", SYMLINK+="%c"

This should generate udev aliases made of the device subenclosure nickname followed by the bay identifier. In the following case, io1-jbod1-0 is the subenclosure nickname (here SIM 0 of JBOD #1).

$ ls -l /dev/io1-jbod1-0-bay26
lrwxrwxrwx 1 root root 4 Oct 14 21:00 /dev/io1-jbod1-0-bay26 -> sdab


This utility is very similar to sas_sd_snic_alias but only accepts device-mapper devices. Add the following line to your udev rules:

KERNEL=="dm-[0-9]*", PROGRAM="/usr/bin/sas_mpath_snic_alias %k", SYMLINK+="mapper/%c"

This will result in useful symlinks.

$ ls -l /dev/mapper/io1-jbod1-bay26
lrwxrwxrwx 1 root root 8 Oct 14 21:00 /dev/mapper/io1-jbod1-bay26 -> ../dm-31

sasutils Python library

Documentation will be available on the wiki.

  • the following example will list all SAS hosts (controllers) found in sysfs

    from import SASHost
    from sasutils.sysfs import sysfs
    # sysfs is a helper to walk through sysfs (/sys)
    for node in sysfs.node('class').node('sas_host'):
        # Instantiate SASHost with the sas_host sysfs device class
        host = SASHost(node.node('device'))
        # To get its sysfs name, use:
        # To get attributes from scsi_host, use:
        print('  %s' % host.scsi_host.attrs.host_sas_address)
        print('  %s' % host.scsi_host.attrs.version_fw)
  • See also


Stephane Thiell - Stanford Research Computing Center

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

sasutils-0.2.4.tar.gz (18.1 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page