scicm 0.7.1

Science Colour Maps is a small package containing several colour maps created using viscm.

scicm: Science Colour Maps

scicm is a small package containing several colour maps, aimed at filling gaps in the availability of good (i.e. perceptually linear) in both matplotlib and in other available packages (like cmocean and CMasher). All colour maps in this package have been created using viscm. The full viscm visualisations are available in the viscm_files/visualisation_samples folder of this repository. Also included are utilities for colour map manipulation.

Installation and use

The package is available for installation using pip:

>pip install scicm

Although you may wish to install it directly from GitHub using:

>pip install git+https://github.com/MBravoS/splotch.git@master

Upon importing scicm, the colour maps are registered with matplotlib, so they can be used by passing cmap='scicm.cmapname' to any plotting function that accepts a colour map (e.g. the cmap keyword in matplotlib). The colour map objects can also be explicitly accessed using scicm.cm.cmapname. Reversed versions of the colour maps are also included, accessible through the same naming convention used by matplotlib (i.e. <cmapname>_r).

Included Colour Maps

Monochromatic colour maps

The first set of colour maps are meant as a replacement for the sequential colour maps from matplotlib. All are designed with the same dynamic range in lightness, which means that small value changes are equally distinct. The first set contains the colour maps designed as general-purpose, being not only perceptually linear but also lacking strong hue changes, which could mistakenly lead the eye to certain value ranges. This near-constant hue also ensures that they are all colourblind-friendly.

Soft monochromatic colour maps

A not uncommon use of colour maps is to display images/data on top of which further lines/markers will be drawn on top (e.g., drawing contours on top of an image), which can make the choice of colour for said lines/markers challenging, particularly if they overlap both light and dark areas of the image. Making the colour map lighter/darker with alpha compositing is a common approach, but this makes the resulting maps non-perceptually linear. For this reason, this set offers ligther and less saturated versions of the monochromatic colour maps. This enables both a linear representation of the underlying data and increased visibility of lines/markers drawn on top. If this is not a concern, we recomend using maps from the monochromatic set, as they have a larger lightness dynamic range.

Bichromatic colour maps

The colour maps in this set contain small and simple hue changes compared to the monochromatic set, intended to transition from one hue to the other roughly halfway in the value range. These colour maps should be used when a greater differentiation between low and high values is desired. Not all of these maps are as colourblind-friendly, so we recommend checking the viscm visualisations before choosing one.

Diverging colour maps

This set is composed of diverging colour maps, which are intended to be used only when visualising data that is centered around a critical value. In most cases, the middle point is the darkest, as this clearly distinguishes the middle values from lack of data without the need to set the figure background to a colour other than white. The two colour maps that have a light middle point (BwR and GwP) add choices for cases where that is not a concern. All these colour maps span the same dynamic range in lightness on each side and across maps and are intended to be colourblind-friendly to a good degree. For ease of use, all these colourmaps are also registered with their inverse names (e.g., PkG, which is equivalent to GkP_r).

Miscellaneous colour maps

The last set is composed of colour maps with special use cases:

• Day and Night: Cyclic colour maps, linear adaptions of the twilight_shifted and twilight maps from matplotlib, respectively. Cyclic maps should only be used for cyclic data, an easy example being angles where -180° is the same as 180°.
• Garnet, Ripe and Tropical: Linear colour maps that have been designed for plots where the intention is to highlight broad regions of the data through large variations in hue. For this purpose, they have been designed with less than half of the lightness dynamic range than our other linear maps. Due to these design choices, they are inherently less colourblind-friendly than the rest of the colour maps.
• Edges: A linear colour map inspired by cmocean's Oxy. It uses Stone as a base, but with the notable distinction that for [normalised] values below 0.2 and above 0.8 it changes colour (to blue and yellow, respectively). This is intended to selectively highlight the extreme values of the data.
• Quartile: An experimental colour map, composed of four linear segments of significantly different hues, though still perfectly linear in greyscale. This colour map is meant as an alternative to filled contours, as it displays information inside the contours that would be otherwise lost.

Included Tools

All tools are part of the scicm.tools submodule. These tools are:

• scicm.tools.crop(cmapin,vmin=0.0,vmax=1.0,name_newcmap='newcmap'): Generates a new colour map based on cmapin, cropped to only include the colours associated with the [vmin,vmax] range of values. If given a name through name_newcmap it will register the colour map with matplotlib (only for the current session).
• scicm.tools.merge(cmapinlist,tpoints,name_newcmap='newcmap'): Generates a new colour map by merging the colour maps listed in cmapinlist, transitioning from the first on the list the the following ones at the values given in tpoints. If given a name through name_newcmap it will register the colour map with matplotlib (only for the current session).
• scicm.tools.stitch(cmapinlist,vlims,tpoints,name_newcmap='newcmap'): A generalised version of scicm.tools.merge, where vlims contains the [vmin,vmax] pairs to crop from each input colour map, and tpoints defining where the transition from each crop is located on the output colour map. If given a name through name_newcmap it will register the colour map with matplotlib (only for the current session).

Examples

Colour map use examples:

#Importing libraries
import scicm
import numpy as np
import matplotlib.pyplot as plt
import matplotlib.colors as col

# Generating random data
rng=np.random.default_rng()
x=np.concatenate([rng.normal(0,0.5,100000),rng.normal(1,0.5,100000)])
y=np.concatenate([rng.normal(0,0.5,60000),rng.normal(1,0.5,60000),rng.normal(-1,0.5,80000)])
z=np.concatenate([rng.uniform(0,0.2,60000),rng.uniform(0.2,0.5,60000),rng.uniform(0.5,1,80000)])

# Plotting
faint_white=np.array(col.to_rgba('white'))
faint_white[-1]=0.8

fig,axes=plt.subplots(nrows=3,ncols=2,figsize=(12,12),gridspec_kw=dict(wspace=0.0,hspace=0.0))

# Example of a monochromatic map, using the registered names with matplotlib
axes[0,0].hexbin(x,y,lw=0,cmap='scicm.Teal')
# Example of a soft map, using the colour map objects
axes[0,1].hexbin(x,y,lw=0,cmap=scicm.cm.SoftTeal)
# Example of a bichromatic map, reversing the colour map
axes[1,0].hexbin(x,y,lw=0,cmap='scicm.M2R_r')
# Example of a diverging map
axes[1,1].hexbin(x,y,lw=0,cmap='scicm.PkO')
# Example of a segmented map
axes[2,0].hexbin(x,y,lw=0,cmap='scicm.Edges')
# Example of a miscellaneous map
axes[2,1].hexbin(x,y,lw=0,cmap='scicm.Tropical')

for ax,txt in zip(axes.flatten(),['Teal','SoftTeal','MkR_r','PkO','Edges','Tropical']):
    ax.text(-1.8,2.2,txt,fontsize=20,backgroundcolor=faint_white)
    ax.set_xticks([])
    ax.set_yticks([])
    ax.set_xlim([-2,3])
    ax.set_ylim([-2.9,2.9])

plt.tight_layout()
plt.show()

Tools use examples:

# Colour map cropping
cropped_Bkr=scicm.tools.crop('scicm.BkR',vmin=0.2,vmax=1.0)

fig,axes=plt.subplots(nrows=1,ncols=2,figsize=(12,4),gridspec_kw=dict(wspace=0.0,hspace=0.0),facecolor='w')
h1=axes[0].hexbin(x,y,C=z,lw=0,cmap='scicm.BkR')
h2=axes[1].hexbin(x,y,C=z,lw=0,cmap=cropped_Bkr)

for ax,txt in zip(axes.flatten(),['scicm.BkR','cropped_Bkr']):
    ax.text(-1.8,2.2,txt,fontsize=20,backgroundcolor=faint_white)
    ax.set_xticks([])
    ax.set_yticks([])
    ax.set_xlim([-2,3])
    ax.set_ylim([-2.9,2.9])

cbar0=fig.colorbar(h1,ax=axes[0])
cbar0.set_label('mean value')
cbar1=fig.colorbar(h2,ax=axes[1])
cbar1.set_label('mean value')

plt.tight_layout()
plt.show()

# Colour map merging and stitching
Edges_M2R=scicm.tools.merge(['scicm.Stone','scicm.M2R','scicm.Stone'],[0.2,0.5],'custom.Edges_M2R')
T2B2P=scicm.tools.stitch(['scicm.B2T_r','scicm.B2P'],np.array([[0,1],[0,1]]),[0.5],'custom.T2B2P')

fig,axes=plt.subplots(nrows=1,ncols=2,figsize=(12,4),gridspec_kw=dict(wspace=0.0,hspace=0.0),facecolor='w')
h1=axes[0].hexbin(x,y,C=z,cmap='custom.Edges_M2R')
h2=axes[1].hexbin(x,y,C=z,cmap='custom.T2B2P')

for ax,txt in zip(axes.flatten(),['custom.Edges_M2R','custom.T2B2P']):
    ax.text(-1.8,2.2,txt,fontsize=20,backgroundcolor=faint_white)
    ax.set_xticks([])
    ax.set_yticks([])
    ax.set_xlim([-2,3])
    ax.set_ylim([-2.9,2.9])

cbar0=fig.colorbar(h1,ax=axes[0])
cbar0.set_label('mean value')
cbar1=fig.colorbar(h2,ax=axes[1])
cbar1.set_label('mean value')

plt.tight_layout()
plt.show()