screenlogicpy 0.8.0

Interface for Pentair ScreenLogic connected pool controllers over IP via Python

screenlogicpy

screenlogicpy is an interface for Pentair ScreenLogic connected pool controllers over IP via python using asyncio.

Installation

The screenlogicpy package can be installed from PyPI using pip.

$ pip install screenlogicpy

Library usage

• Changed in v0.5.0: The screenlogicpy library has moved over to using asyncio for all network I/O. Relevant methods now require the async/await syntax.
• New in v0.8.0: Support for Python 3.8 and 3.9 is being phased out across future releases. This will be the last version to support Python 3.8.

The ScreenLogicGateway class is the primary interface.

from screenlogicpy import ScreenLogicGateway

    gateway = ScreenLogicGateway()

• Changed in v0.5.0: Instantiating the gateway no longer automatically connects to the protocol adapter or performs an initial update.
• Changed in v0.7.0: Passing adapter connection info when instantiating the gateway is deprecated and will be removed in a future release. Connection info should be passed to async_connect() instead.
• Changed in v0.8.0: Support for passing connection info to gateway constructor is fully deprecated and has been removed. Ability to specify client id used for push subscriptions, and to specify maximum number of times to retry a request has replaced it.

Connecting to a ScreenLogic Protocol Adapter

Once instantiated, use async_connect() to connect and login to the ScreenLogic protocol adapter, and gather the pool configuration.

If disconnected, this method may be called without any parameters to reconnect with the previous connection info, or with new parameters to connect to a different host.

success = await gateway.async_connect("192.168.x.x")

• New in v0.5.0.
• Changed in v0.7.0: async_connect() now accepts adapter connection info. This supports handling ip changes to the protocol adapter.

Polling the pool state

Once connected, all available state information can be polled with the async_update() coroutine.

await gateway.async_update()

This update consists of sending requests for:

1. Current pool status
2. Detailed information for each configured pump
3. Detailed pool chemistry information
4. Status and settings for any configured salt chlorine generators

Warning: This method is not rate-limited. The calling application is responsible for maintaining reasonable intervals between updates. The ScreenLogic protocol adapter may respond with an error message if too many requests are made too quickly.

• Changed in v0.5.0: This method is now an async coroutine and no longer disconnects from the protocol adapter after polling the data.

Subscribing to pool state updates

The preferred method for retrieving updated pool data is to subscribe to updates pushed to the gateway by the ScreenLogic system. This reduces network traffic compared to polling, and improves responsiveness to state changes.

To enable push updates, subscribe to a particular message code using gateway.async_subscribe_client(callback, message_code), passing a callback method to be called when that message is received, and the message code to subscribe to. This function returns a callback that can be called to unsubscribe that particular subscription.

The gateway's ClientManager will automatically handle subscribing and unsubscribing as a client to the ScreenLogic protocol adapter upon the first callback subscription and last unsub respectively.

from screenlogicpy.const import CODE

def status_updated():
    # Do something with the updated data    

unsub_method = await gateway.async_subscribe_client(status_updated, CODE.STATUS_CHANGED)

Example in ./examples/async_client.py

Multiple callbacks can be subscribed to a single message code. Additionally, a single global callback may be subscribed to multiple message codes.
Note: Each combination of callback and code will result in a separate unique unsub callback. The calling application is responsible for managing and unsubing all subscribed callbacks as needed.

Pushed data

While the ScreenLogic system does support some push updates, not all state information for all equipment available via push. The two main state update messages that can be subscribed to are:

• General status update containing
  • Air and water temperature and heater states
  • Basic status indicators such as Freeze mode and active delays
  • Circuit states
  • Basic chemistry information
• IntelliChem controller status update containing
  • Detailed chemistry information

The status of any pumps or salt chlorine generators is not included in any push updates. To supplement this, the different data sets can now be requested individually.

• New in v0.7.0.

Polling specific data

To update a specific set of data, you can use any of the following methods:

# Updates the basic status of the pool controller. *Same as pushed data
await gateway.async_get_status()

# Updates the state of all configured pumps
await gateway.async_get_pumps()

# Updates the detailed chemistry information from a IntelliChem controller. *Same as pushed data
await gateway.async_get_chemistry()

# Updates the state of any configured salt chlorine generators
await gateway.async_get_scg()

Push subscriptions and polling of all or specific data can be used on their own or at the same time.
Warning: Some expected data keys may not be present until a full update has been performed. It is recommended that an initial full async_update() be preformed to ensure the gateway's data dict is fully primed.

• New in v0.7.0.

Using the data

The ScreenLogicGateway class caches all data from the ScreenLogic protocol adapter as a single dict object for continued reference by the consuming application. This includes any data processed via push or polling. The consuming application may get this data at anytime with the get_data() method.

data = gateway.get_data()

Disconnecting

When done, use async_disconnect() to unsubscribe from push updates and close the connection to the protocol adapter.

await gateway.async_disconnect()  

• New in v0.5.0.

Gateway Discovery

The discovery module's async_discover() function can be used to get a list of all discovered ScreenLogic protocol adapters on the local network. Each protocol adapter is represented as a dict object that can then be directly used to instanciate a ScreenLogicGateway class.

Note: Gateway discovery is limited to discovering ScreenLogic protocol adapters on the same subnet.

hosts = await discovery.async_discover()

• Changed in v0.5.0: This method is now an async coroutine.

Example in ./examples/async_discovery.py

Basic Implementation Example

from screenlogicpy import ScreenLogicGateway, discovery

hosts = await discovery.async_discover()
if len(hosts) > 0:
    gateway = ScreenLogicGateway(**hosts[0])
    if await gateway.async_connect():
        await gateway.async_update()
        await gateway.async_disconnect()
        data = gateway.get_data()
else:
    print("No gateways found")

Full example in ./examples/gateway.py

Performing actions

The following actions can be performed with methods on the ScreenLogicGateway object:

• Set a specific circuit to on or off
• Set a heating mode for a specific body of water (spa/pool)
• Set a target heating temperature for a specific body of water (spa/pool)
• Select various color-enabled lighting options
• Set the chlorinator output levels
• Setting IntelliChem chemistry values

Each method will return True if the operation reported no exceptions. Note: The methods do not confirm the requested action is now in effect on the pool controller.

Turning a circuit ON or OFF

A circuit can be requested to be turned on or off with the async_set_circuit() method. async_set_circuit takes two required arguments, circuitID which is the id number of the circuit as an int, and circuitState which represents the desired new state of the circuit, as an int. See Circuit State below.

success = await gateway.async_set_circuit(circuitID, circuitState)

• Changed in v0.5.0: This method is now an async coroutine.

Setting a heating mode

The desired heating mode can be set per body of water (pool or spa) with async_set_heat_mode(). async_set_heat_mode takes two required arguments, body as an int representing the body of water, and mode as an int of the desired heating mode.

success = await gateway.async_set_heat_mode(body, mode)

• Changed in v0.5.0: This method is now an async coroutine.

Setting a target temperature

The target heating temperature can be set per body of water (pool or spa) with async_set_heat_temp(). async_set_heat_temp takes two required arguments, body as an int representing the body of water, and temp as an int of the desired target temperature.

success = await gateway.async_set_heat_temp(body, temp)

Changed in v0.5.0: This method is now an async coroutine.

Setting light colors or shows

Colors or color-shows can be set for compatible color-enable lighting with async_set_color_lights(). async_set_color_lights takes one required argument, light_command as an int representing the desired command/show/color

success = await gateway.async_set_color_lights(light_command)

• Changed in v0.5.0: This method is now an async coroutine.

Setting chlorinator output levels

Chlorinator output levels can be set with async_set_scg_config(). async_set_scg_config takes two int arguments, pool_output and spa_output.

success = await gateway.async_set_scg_config(pool_output, spa_output)  

• New in v0.5.0.

Setting IntelliChem Chemistry values

Chemistry values used in the IntelliChem system can be set with async_set_chem_data(). async_set_chem_data takes six arguments, ph_setpoint, orp_setpoint, calcium, alkalinity, cyanuric, and salt. ph_setpoint is a float and the rest are int.

success = await gateway.async_set_chem_data(ph_setpoint, orp_setpoint, calcium, alkalinity, cyanuric, salt)

Currently all values are required, even if you only want to change one of them. For this reason, it is recommended that the calling code gathers all the current values first, then updates whichever value(s) are desired before calling async_set_chem_data().

chem_data = gateway.get_data()[DATA.KEY_CHEMISTRY]
ph = chem_data["ph_setpoint"]["value"]
orp = chem_data["orp_setpoint"]["value"]
ch = chem_data["calcium_harness"]["value"]
ta = chem_data["total_alkalinity"]["value"]
ca = chem_data["cya"]["value"]
sa = chem_data["salt_tds_ppm"]["value"]

ph = ...  # Code to update any of the values

success = await gateway.async_set_chem_data(ph, orp, ch, ta, ca, sa)

Note: Only ph_setpoint and orp_setpoint are settable through the command line.

• New in v0.6.0.

Handling unsolicited messages

With the move to asyncio, screenlogicpy can now handle unsolicited messages from the ScreenLogic protocol adapter (messages that are not a direct response to a request from screenlogicpy). To do so, you need to tell the ScreenLogicGateway what message code to listen for and what to do when it is received. You can register a handler with register_message_handler() . This method takes the message code to wait for, the async coroutine to schedule when a message is received, and any parameters you want to pass to your handler. Your handler coroutine needs to accept the bytes message itself, and any additional parameters you specified.

Notes:

• Currently the ScreenLogicGateway must be connected to the protocol adapter before registering a handler.
• Registering a handler in this way does not subscribe the gateway to push state updates from the ScreenLogic system.

Example:

WEATHER_UPDATE_CODE = 9806
WEATHER_REQUEST_CODE = 9807

async def weather_request(message: bytes, data: dict):
    result = await gateway.async_send_message(WEATHER_REQUEST_CODE)
    decode_weather(result, data)
    print(data)

gateway.register_async_message_handler(WEATHER_UPDATE_CODE, weather_request, data)

Remove the handler with:

gateway.remove_async_message_handler(WEATHER_UPDATE_CODE)

Example in ./examples/async_listen.py

• New in v0.7.0.

Debug Information

A debug function is available in the ScreenLogicGateway class: get_debug. This will return a dict with the raw bytes for the last response for each request the gateway performs during an update. This can be useful for debugging the actual responses from the protocol adapter.
Note: Currently only includes polled data.

last_responses = gateway.get_debug()

• New in v0.5.5.

Command line

Screenlogicpy can also be used via the command line. The primary design is for the command line output to be consumed/parsed by other applications and thus by default is not very human-readable. For more human-friendly output, specify the -v, --verbose option.

Basic usage

$ screenlogicpy

Without any arguments, screenlogicpy will attempt to discover a gateway on the LAN, and display a human readable "dashboard" of the current state of their pool.

$ screenlogicpy
Discovered 'Pentair: XX-XX-XX' at 192.168.XX.XX:80
EasyTouch2 8
**************************
Pool temperature is last 58°F
Pool Heat Set Point: 86°F
Pool Heat: Off
Pool Heat Mode: Off
--------------------------
Spa temperature is last 97°F
Spa Heat Set Point: 97°F
Spa Heat: Off
Spa Heat Mode: Heater
--------------------------
**************************
    ID  STATE  NAME
--------------------------
500    Off  Spa
501    Off  Waterfall
502    Off  Pool Light
503    Off  Spa Light
504    Off  Cleaner
505     On  Pool Low
506    Off  Yard Light
507    Off  Aux 6
508    Off  Pool High
510    Off  Feature 1
511    Off  Feature 2
512    Off  Feature 3
513    Off  Feature 4
514    Off  Feature 5
515    Off  Feature 6
516    Off  Feature 7
517    Off  Feature 8
519    Off  AuxEx
**************************

Argument usage

screenlogicpy [-h] [-v] [-i IP] [-p PORT] {discover,get,set} ...

Optional arguments

-h, --help

Argparse help command. Available at any stage of positional commands.

-v, --verbose

Tells screenlogicpy to be a little more verbose in it's output. Friendlier for humans.

-i, --ip

screenlogicpy -i xxx.xxx.xxx.xxx

Specify the IP address of the ScreenLogic protocol adapter to connect to.
Note: If the IP address is not specified, screenlogicpy will attempt to discover ScreenLogic protocol adapters on the local network, and connect to the first one that responds. This is generally fine if you only have one ScreenLogic protocol adapter. Discovery is limited to finding protocol adapters on the same subnet as the host running screenlogicpy.

-p, --port

screenlogicpy -i xxx.xxx.xxx.xxx -p xx

Specify the port of the ScreenLogic protocol adapter to connect to. Needs to be used in conjunction with -i, --ip option.

Positional arguments

discover

screenlogicpy discover

Attempts to discover ScreenLogic protocol adapters on the local network via UDP broadcast. Returns [ip address]:[port] of each discovered ScreenLogic protocol adapter, one per line.
Note: Discovery is limited to finding protocol adapters on the same subnet as the host running screenlogicpy.

get

screenlogicpy get {circuit,c,heat-mode,hm,heat-temp,ht,heat-state,hs,current-temp,t,json,j}

The get option is use with additional options to return the current state of the additional option specified.

get circuit, c

screenlogicpy get circuit [circuit number]

Returns 1 for on and 0 for off

get heat-mode, hm

screenlogicpy get heat-mode [body]

Returns the current heating mode for the specified body of water.
Note: [body] can be an int or string representing the body of water.

get heat-temp, ht

screenlogicpy get heat-temp [body]

Returns the current target heating temperature for the specified body of water.
Note: [body] can be an int or string representing the body of water.

get heat-state, hs

screenlogicpy get heat-state [body]

Returns the current state of the heater for the specified body of water. The current state will match the heat mode when heating is active, otherwise will be 0 (off).
Note: [body] can be an int or string representing the body of water.

get current-temp, t

screenlogicpy get current-temp [body]

Returns the current temperature for the specified body of water. This is actually the last-known temperature from when that body of water was active (Pool or Spa)
Note: [body] can be an int or string representing the body of water.

get json, j

screenlogicpy get json

Returns a json dump of all data cached in the data dict.

set

screenlogicpy set {circuit,c,color-lights,cl,heat-mode,hm,heat-temp,ht} ...

All set commands work like their corresponding get commands, but take an additional argument or arguments for the desired setting.

set circuit, c

screenlogicpy set circuit [circuit number] [circuit state]

Sets the specified circuit to the specified circuit state.
Note: [circuit state] can be an int or string representing the desired circuit state.

set heat-mode, hm

screenlogicpy set heat-mode [body] [heat mode]

Sets the desired heating mode for the specified body of water.
Note: [body] can be an int or string representing the body of water. [heat mode] can be an int or string representing the desired heat mode

set heat-temp, ht

screenlogicpy set heat-temp [body] [heat temp]

Sets the desired target heating temperature for the specified body of water.
Note: [body] can be an int or string representing the body of water. [heat temp] is an int representing the desired target temperature.

set color-lights, cl

screenlogicpy set color-lights [color mode]

Sets a color mode for all color-capable lights configured on the pool controller.
Note: [color mode] can be either the int or string representation of a color mode.

• New in v0.3.0.

set salt-generator, scg

screenlogicpy set salt-generator [pool_pct] [spa_pct]

Sets the chlorinator output levels for the pool and spa. Pentair treats spa output level as a percentage of the pool's output level.
Note: [pool_pct] can be an int between 0-100, or * to keep the current value. [spa_pct] can be an int between 0-100, or * to keep the current value.

• New in v0.5.0.

set chem-data, ch

screenlogicpy set chem-data [ph_setpoint] [orp_setpoint]

Sets the pH and/or ORP set points for the IntelliChem system.
Note: [ph_setpoint] can be a float between 7.2-7.6, or * to keep the current value. [orp_setpoint] can be an int between 400-800, or * to keep the current value.

• New in v0.6.0.

Reference

Circuit State

int	string	Name
0	off	Off
1	on	On

Body

int	string	Name
0	pool	Pool
1	spa	Spa

Heat Modes

int	string	Name	Description
0	off	Off	Heating is off
1	solar	Solar	Heating will use solar heat to achieve the desired temperature set point.
2	solar_preferred	Solar Preferred	Heating will use solar if available to achieve the desired temperature set point, otherwise it will use the heater.
3	heater	Heater	Heating will use the heater to achieve the desired temperature set point.
4	dont_change	Don't Change	Don't change the heating mode based on circuit or function changes.

Color Modes

int	string	Name	Description
0	all_off	All Off	Turns all light circuits off.
1	all_on	All On	Turns all light circuits on to their last mode.
2	color_set	Color Set	Sets light circuits to their pre-set colors as set in the pool controller.
3	color_sync	Color Sync	Synchronize all IntelliBrite, SAm, SAL, or FIBERworks color changing lights and synchronize their colors.
4	color_swim	Color Swim	Cycles through white, magenta, blue and green colors. (Emulates Pentair SAm color changing light.)
5	party	Party	Rapid color changing building the energy and excitement.
6	romance	Romance	Slow color transitions creating a mesmerizing and calming effect.
7	caribbean	Caribbean	Transitions between a variety of blues and greens.
8	american	American	Patriotic red, white and blue transitions.
9	sunset	Sunset	Dramatic transitions of orange, red and magenta tones.
10	royal	Royal	Richer, deeper, color tones.
11	save	Save Color	Save the exact colors that are being displayed.
12	recall	Recall Color	Recall the saved colors.
13	blue	Blue	Fixed color: Blue
14	green	Green	Fixed color: Green
15	red	Red	Fixed color: Red
16	white	White	Fixed color: White
17	magenta	Magenta	Fixed color: Magenta
18	thumper	Thumper	Toggles the solenoid thumper on MagicStream laminars.
19	next_mode	Next Mode	Cycle to the next color mode.
20	reset	Reset	Reset light modes.
21	hold	Hold	Hold light transitions.

Supported Subscribable Messages

screenlogicpy includes functionality to automatically decode these messages and update it's data accordingly. Other message codes can be subscribed to, but the consuming application will need to implement any processing of the incoming message.

from screenlogicpy.const import CODE

Message Code	Imported CONST	Description
12500	CODE.STATUS_CHANGED	Sent when basic status changes. Air/water temp, heater state, circuit state, basic chemistry (if available).
12504	CODE.COLOR_UPDATE	Sent repeatedly during a color lights color mode transition.
12505	CODE.CHEMISTRY_CHANGED	Sent when a change occurs to the state of an attached IntelliChem controller.

---

Acknowledgements

Inspired by https://github.com/keithpjolley/soipip

The protocol and codes are documented fairly well here: https://github.com/ceisenach/screenlogic_over_ip