ser2sock 4.1.1

serial to socket bridge

ser2sock

A single-threaded, multi serial line to TCP bridge server.

Can run under python 2.6 up to 3.x (tested 3.8).

Installation

From within your favorite python environment:

pip install ser2sock

Usage

ser2net -c <configuration file>

Configuration

In order to provide flexibility, configuration is written in python.

The only requirement is to have a bridges member which consists of a sequence of bridges. A bridge is a dictionary with mandatory keys serial and tcp.

Example:

bridges = [
    {
        'serial': {'address': '/dev/ttyS0'},
        'tcp': {'address': ("0", 18500)}
    },
    {
        'serial': {'address': '/dev/ttyS1', 'baudrate': 19200},
        'tcp': {'address': ("0", 18501), 'no_delay': False}
    }
]

• serial: address mandatory. Supports any keyword supported by serial.serial_for_url (or serial.Serial if serial_for_url does not exist
• tcp: address mandatory (must be a pair bind host and port).
  • reuse_addr: (default: True) TCP reuse address
  • no_delay: (default: True) disable Nagle's algorithm
  • tos: (default: 0x10, meaning low delay) type of service.

tcp and serial helpers are automatically loaded to the config namespace. Here is the equivalent above config using helpers:

bridges = [
    [serial(address="/dev/ttyS0"), tcp(address=("0", 18500))],
    [serial(address="/dev/ttyS1", baudrate=19200),
     tcp(address=("0", 18501), no_delay=False)],
]

You are free to put any code in your python configuration file. Here is an example setting up logging:

import logging
logging.basicConfig(
    level=logging.DEBUG,
    format='%(asctime)s %(levelname)s %(message)s'
)

bridges = [
    [serial(address="/dev/ttyS0"), tcp(address=("0", 18500))],
    [serial(address="/dev/ttyS1", baudrate=19200),
     tcp(address=("0", 18501), no_delay=False)],
]

Web UI

The active configuration can be changed online through a web UI.

To enable web you need to install the extra package:

$ pip install ser2sock[web]

...and enable the web app in the configuration with:

bridges = [...]

web = ':8000'

ser2sock should now be visible here.

You should see something like this:

Note that changes made with the web interface only affect the active ser2sock instance and never the original configuration file.

That's all folks!