Library for reading data from the sensiron SGP30
Project description
Program to read eCO_2 and TVOC from the SGP30 sensor. Based on the smbus2 i2c library for ease of use.
Quick usage-example:
from sgp30 import Sgp30 import time with SMBusWrapper(1) as bus: sgp=Sgp30(bus,baseline_filename="/tmp/mySGP30_baseline") #things thing with the baselinefile is dumb and will be changed in the future print("resetting all i2c devices") sgp.i2c_geral_call() #WARNING: Will reset any device on teh i2cbus that listens for general call print(sgp.read_features()) print(sgp.read_serial()) sgp.init_sgp() print(sgp.read_measurements()) print("the SGP30 takes at least 15 seconds to warm up, 12 hours before the readigs become really stable" for i in range(20): time.sleep(1) print(".",end="") print() print(sgp.read_measurements())
Features that are known to be missing (listing in rough order of importance):
Fix python3 compatibility.
The handing of baseline values are not that great, it should probably be up to the end user to save and restore them as needed.
Write doc-strings for all or at least most methods.
reading raw-values.
A more “driver like” class that took care of all chip identification, polling intervals store baseline and so on.
Hardware notices:
If you have the AdaFruit board with built in level shifters and voltage regulator it is should work if you just plug in SDA to pin 3, SCL to pin 5, VCC to pin 17 and GND to pin 20. You should then be able to find the SGP30 an address 0x58 using i2cdetect -y 1. If you get an error message you probbably need to enable i2c in the kernel using raspi-config and reboot
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.