SJ201 Interface
Project description
SJ-201 Interface
Contains Python bindings for released versions of the SJ201 using Mycroft testing code for reference.
CLI Usage
sj201 reset-led <color>
Chase the specified color and then chase off LED ring. Valid colors are:
- white
- yellow
- red
- green
- blue
- magenta
- burnt_orange
- mycroft_red
- mycroft_green
- mycroft_blue
NOTE: On the SJ201R10, this command must be run as root
sj201 set-fan-speed <percent>
Set the fan speed to the specified speed as a percentage.
NOTE: On the SJ201R10, changing the fan speed is currently not persistent and the fan will default to 100% after momentarily setting the requested speed. Setting speed to 0 will turn off the fan until the Raspberry Pi is shut down, at which point the fan will resume 100%.
sj201 init-ti-amp
Perform boot time initialization of the TAS5806 Audio Amplifier
sj201 patch-config-txt
Perform one-time update of config.txt for detected SJ201 hardware
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distributions
Built Distribution
Hashes for sj201_interface-0.0.2a2-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | 1433ba55f5774cb20ef3c3d4990dd2304aba6aabf890c11ab0046dc8956f4a2a |
|
MD5 | 63ebe5bc3d637eaac0e3bb60cf031a51 |
|
BLAKE2b-256 | 388c7b466b7ade91bc6054133f2dc638600d8fa0a616875155eaa4954d8daf11 |