SJ201 Interface
Project description
SJ-201 Interface
Contains Python bindings for released versions of the SJ201 using Mycroft testing code for reference.
CLI Usage
sj201 get-revision
Get a string representation of the detected SJ201 board (6
or 10
) or 0
sj201 reset-led <color>
Chase the specified color and then chase off LED ring. Valid colors are:
- white
- yellow
- red
- green
- blue
- magenta
- burnt_orange
- mycroft_red
- mycroft_green
- mycroft_blue
NOTE: On the SJ201R10, this command must be run as root
sj201 set-fan-speed <percent>
Set the fan speed to the specified speed as a percentage.
NOTE: On the SJ201R10, changing the fan speed is currently not persistent and the fan will default to 100% after momentarily setting the requested speed. Setting speed to 0 will turn off the fan until the Raspberry Pi is shut down, at which point the fan will resume 100%.
sj201 init-ti-amp
Perform boot time initialization of the TAS5806 Audio Amplifier
sj201 patch-config-txt
Perform one-time update of config.txt for detected SJ201 hardware.
NOTE: Applying this could cause damage or unexpected behavior for connected HATs/GPIO components.
NOTE:
reboot
will cause kernel panics unless power is physically disconnected
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distributions
Built Distribution
Hashes for sj201_interface-0.0.3a0-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | bfa5b941953b5f52ec51f8f00ba65bb6f313c82ac09690dfded9b80f266d614b |
|
MD5 | dd841180a2bfa6ccaef84c697e666175 |
|
BLAKE2b-256 | d6d8e0d0ae5708b6b4462b2b351d8384cc11f33055f1cb321a727489a581bed2 |