Skip to main content

An unofficial Python SDK for Hyperledger Fabric

Project description


Python + Fabric == snakeskin

This library is a re-implementation of the official Hyperledger Fabric (HLF) Python SDK, providing simpler Python interfaces with HLF while still allowing for fine-grained control over communication with your network.

Specifically, we are building this library with the following goals in mind:

  • Clear configuration - offer configuration that is clearly documented, easy to use, and free of redundancies
  • Simplicity - offer simple, high-level interfaces for use with less complex networks
  • Control - offer fine-grained communication interfaces for interaction with the network, that are as clearly documented as their higher-level counterparts
  • Stateless - where feasible, avoid the complexities of managing state transitions, allowing for a more reliable development experience
  • Fail gracefully - raise semantic, hierarchical, and meaningful error messages
  • Pythonic - use Python naming conventions to allow for cleaner integration into your Python app

With snakeskin you can manage transaction life-cycles, request retries, and complex network gateways with a high degree of specificity and control, while still leveraging higher-level operations when the control is not needed or desired.


$ [sudo] pip install snakeskin-fabric


Snakeskin can be configured using a static file, or dynamically in Python, and is relatively flexible, as the requirements for a configuration depend largely on the use case.

See the example configuration in examples/config-files/example-blockchain-config.yaml for example configuration structure. Note that the following file formats are supported:

  • YAML - (.yaml, .yml)
  • JSON - (.json)

To load a configuration into the framework, simply do:

from snakeskin.config import BlockchainConfig

# Or load from a static file
blockchain = BlockchainConfig.from_file('/path/to/config/file.yaml')

# Or load from a dictionary
blockchain = BlockchainConfig.from_dict({
    # ...

Interacting with the Blockchain

To run transactions against the blockchain, it's easiest to use a Gateway, which is pre-configured with the requisite peers, orderers, channel, and chaincode specification. See the gateways section of the example config for configuration options. Once configured, you can retrieve your gateway from the blockchain config with:

gateway = blockchain.get_gateway('my-gateway')

# or build your own programatically:
from snakeskin.models.gateway import Gateway
gateway = Gateway(
    # ...


Once configured, performing transactions against the chaincode is relatively straight-forward. Gateways expose the same high-level abstractions - invoke and query - as the HLF peer CLI command.

# query the chaincode to retrieve data
transaction = await gateway.query(
    args=['arg1', 'arg2']

# invoke the chaincode to persist data, waiting for the chaincode to
# successfully commit
transaction = await gateway.invoke(
    args=['arg1', 'arg2'],

transaction.response_payload #=> b'<chaincode response>'

However, if you want more control over the transaction flow, you can use the transact method and chain operations (see snakeskin.models.GatewayTXBuilder for available options):

# A step-by-step transaction flow
transaction = await (
        args=['arg1', 'arg2']
    # Sends the transaction to the peers for endorsement
    # Optionally sends the transaction to the orderers for committing
    # Optionally wait (up to 50 seconds) for the transaction to be successfully
    # committed to the peer

transaction.response_payload #=> b'<chaincode response>'

Network Administration

Most administrative operations are also available through the Gateway:

# Creates the channel, via the orderer
await gateway.create_channel(tx_file_path='/path/to/channel.tx')
# Joins the gateway's endorsing peers to the channel
await gateway.join_channel()
# Query instantiated chaincode for the channel
resp = await gateway.query_instantiated_chaincodes()
resp.chaincodes[0].name # => 'my-chaincode'
# Installs the chaincode
await gateway.install_chaincode()
# Instantiates the chaincode
await gateway.instantiate_chaincode(timeout=60)
# Upgrades the chaincode
await gateway.instantiate_chaincode(timeout=60, upgrade=True)

Note that not all assets on the Gateway are required for each administrative operation. create_channel, for instance, doesn't require any endorsing peers defined on the Gateway.

Standalone Operations

A Gateway definition is not required to perform any operation against the blockchain, it is simply a helpful tool in configuring groupings of assets. To perform operations without a Gateway, import them from the snakeskin.operations module. For example:

from snakeskin.operations import create_channel

await create_channel(

Similarly, fine-grained transaction management is available from snakeskin.transact:

from snakeskin.transact import (
    generate_cc_tx, propose_tx, commit_tx, raise_tx_proposal_error

requestor = config.get_user('my-user')

# Generate a new chaincode transaction against mycc on my-channel
generated_tx = await generate_cc_tx(
    args=['arg1', 'arg2']

# Send the proposal to my-peer
endorsed_tx = await propose_tx(

# Raise errors on endorsement failure
    'Endorsements failed for '

# Commit the transaction via the orderer
committed_transaction = await commit_tx(


To stream blocks from a Peer or Orderer node, use the module, as such:

from import PeerEvents

events = PeerEvents(

stream = events.stream_blocks(
    start=0, # start at block 0
    stop=10 # end at block 10 (if omitted, will stream forever)
async for raw_block in stream:
    block = raw_block.decode()
    for transaction in block.transactions:
        transaction.tx_id # => '1234567'

To stream filtered blocks, from the peer, use, and to stream blocks from the orderer use All of these classes implement similar interfaces.


Coming soon


This software uses the Apache License Version 2.0 software license.

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

snakeskin-fabric-0.1.0.tar.gz (93.2 kB view hashes)

Uploaded source

Built Distribution

snakeskin_fabric-0.1.0-py3-none-any.whl (151.1 kB view hashes)

Uploaded py3

Supported by

AWS AWS Cloud computing Datadog Datadog Monitoring Facebook / Instagram Facebook / Instagram PSF Sponsor Fastly Fastly CDN Google Google Object Storage and Download Analytics Huawei Huawei PSF Sponsor Microsoft Microsoft PSF Sponsor NVIDIA NVIDIA PSF Sponsor Pingdom Pingdom Monitoring Salesforce Salesforce PSF Sponsor Sentry Sentry Error logging StatusPage StatusPage Status page