Skip to main content

Neural network classifiers for doublets

Project description



Cells subjected to single cell RNA-seq have been through a lot, and they'd really just like to be alone now, please. If they cannot escape the cell social scene, you end up sequencing RNA from more than one cell to a barcode, creating a doublet when you expected single cell profiles.

solo is a neural network framework to classify doublets, so that you can remove them from your data and clean your single cell profile.

Quick set up

Run the following to clone and set up ve. git clone && cd solo && conda create -n solo python=3.6 && conda activate solo && pip install -e .

Or install via pip conda create -n solo python=3.7 && conda activate solo && pip install solo-sc

If you don't have conda follow the instructions here:

How to solo

usage: solo [-h] [-d DOUBLET_DEPTH] [-g] [-o OUT_DIR] [-r DOUBLET_RATIO]
            [-s SEED] [-k KNOWN_DOUBLETS] [-t {multinomial,average,sum}]
            [-e EXPECTED_NUMBER_OF_DOUBLETS] [-p]
            model_json_file data_file

positional arguments:
  model_json_file       json file to pass VAE parameters
  data_file             h5ad file containing cell by genes counts

optional arguments:
  -h, --help            show this help message and exit
  -d DOUBLET_DEPTH      Depth multiplier for a doublet relative to the average
                        of its constituents (default: 2.0)
  -g                    Run on GPU (default: True)
  -o OUT_DIR
  -r DOUBLET_RATIO      Ratio of doublets to true cells (default: 2.0)
  -s SEED               Path to previous solo output directory. Seed VAE
                        models with previously trained solo model. Directory
                        structure is assumed to be the same as solo output
                        directory structure. should at least have a a
                        pickled object of vae weights and a latent.npy an
                        np.ndarray of the latents of your cells. (default:
  -k KNOWN_DOUBLETS     Experimentally defined doublets tsv file. Should be a
                        single column of True/False. True indicates the cell
                        is a doublet. No header. (default: None)
  -t {multinomial,average,sum}
                        Please enter multinomial, average, or sum (default:
                        Experimentally expected number of doublets (default:
  -p                    Plot outputs (default: True)

model_json example:

  "n_hidden": 384,
  "n_latent": 64,
  "n_layers": 1,
  "cl_hidden": 128,
  "cl_layers": 1,
  "dropout_rate": 0.2,
  "learning_rate": 0.001,
  "valid_pct": 0.10


  • is_doublet.npy np boolean array, true if a cell is a doublet, differs from preds.npy if -e expected_number_of_doublets parameter was used

  • scVI weights for vae

  • scVI weights for classifier

  • latent.npy latent embedding for each cell

  • preds.npy doublet predictions

  • softmax_scores.npy updated softmax of doublet scores (see paper)

  • no_update_softmax_scores.npy raw softmax of doublet scores

  • logit_scores.npy logit of doublet scores

  • real_cells_dist.pdf histogram of distribution of doublet scores

  • accuracy.pdf accuracy plot test vs train

  • train_v_test_dist.pdf doublet scores of test vs train

  • roc.pdf roc of test vs train

  • softmax_scores_sim.npy see above but for simulated doublets

  • logit_scores_sim.npy see above but for simulated doublets

  • preds_sim.npy see above but for simulated doublets

  • is_doublet_sim.npy see above but for simulated doublets

How to demultiplex cell hashing data using HashSolo CLI

Demultiplexing takes as input an h5ad file with only hashing counts. Counts can be obtained from your fastqs by using kite. See tutorial here:

usage: hashsolo [-h] [-j MODEL_JSON_FILE] [-o OUT_DIR] [-c CLUSTERING_DATA]
                [-p PRE_EXISTING_CLUSTERS] [-q PLOT_NAME]
                [-n NUMBER_OF_NOISE_BARCODES]

positional arguments:
  data_file             h5ad file containing cell hashing counts

optional arguments:
  -h, --help            show this help message and exit
  -j MODEL_JSON_FILE    json file to pass optional arguments (default: None)
  -o OUT_DIR            Output directory for results (default:
  -c CLUSTERING_DATA    h5ad file with count transcriptional data to perform
                        clustering on (default: None)
                        column in cell_hashing_data_file.obs to specifying
                        different cell types or clusters (default: None)
  -q PLOT_NAME          name of plot to output (default: hashing_qc_plots.pdf)
                        Number of barcodes to use to create noise distribution
                        (default: None)

model_json example:

  "priors": [0.01, 0.5, 0.49]

Priors is a list of the probability of the three hypotheses, negative, singlet, or doublet that we test when demultiplexing cell hashing data. A negative cell's barcodes doesn't have enough signal to identify its sample of origin. A singlet has enough signal from single hashing barcode to associate the cell with ins originating sample. A doublet is a cell barcode which has signal for more than one hashing barcode. Depending on how you processed your cell hashing matrix before hand you may want to set different priors. Under the assumption that you have subset your cell barcodes using typical QC on your cell by genes matrix, e.g. min UMI counts, percent mitochondrial reads, etc. We found the above setting of prior performed well (see paper). If you have only done relatively light QC in transcriptome space I'd suggest an even prior, e.g. [1./3., 1./3., 1./3.].


  • hashsoloed.h5ad anndata with demultiplexing information in .obs
  • hashing_qc_plots.png plots of probabilites for each cell

How to demultiplex cell hashing data using HashSolo in line

>>> from solo import hashsolo
>>> import anndata
>>> cell_hashing_data ="cell_hashing_counts.h5ad")
>>> hashsolo.hashsolo(cell_hashing_data)
>>> cell_hashing_data.obs.head()
                  most_likeli_hypothesis  cluster_feature  negative_hypothesis_probability  singlet_hypothesis_probability  doublet_hypothesis_probability         Classification
CCTTTCTGTCCGAACC                       2                0                     1.203673e-16                        0.000002                        0.999998                Doublet
CTGATAGGTGACTCAT                       1                0                     1.370633e-09                        0.999920                        0.000080  BatchF-GTGTGACGTATT_x
AGCTCTCGTTGTCTTT                       1                0                     2.369380e-13                        0.996992                        0.003008  BatchE-GAGGCTGAGCTA_x
GTGCGGTAGCGATGAC                       1                0                     1.579405e-09                        0.999879                        0.000121  BatchB-ACATGTTACCGT_x
AAATGCCTCTAACCGA                       1                0                     1.867626e-13                        0.999707                        0.000293  BatchB-ACATGTTACCGT_x
>>> demultiplex.plot_qc_checks_cell_hashing(cell_hashing_data)
  • most_likeli_hypothesis 0 == Negative, 1 == Singlet, 2 == Doublet
  • cluster_feature how the cell hashing data was divided if specified or done automatically by giving a cell by genes anndata object to the cluster_data argument when calling demultiplex_cell_hashing
  • negative_hypothesis_probability
  • singlet_hypothesis_probability
  • doublet_hypothesis_probability
  • Classification The sample of origin for the cell or whether it was a negative or doublet cell.

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for solo-sc, version 0.4
Filename, size File type Python version Upload date Hashes
Filename, size solo-sc-0.4.tar.gz (21.0 kB) File type Source Python version None Upload date Hashes View

Supported by

AWS AWS Cloud computing Datadog Datadog Monitoring DigiCert DigiCert EV certificate Facebook / Instagram Facebook / Instagram PSF Sponsor Fastly Fastly CDN Google Google Object Storage and Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Salesforce Salesforce PSF Sponsor Sentry Sentry Error logging StatusPage StatusPage Status page