spd3303x 1.0.0

Python API for SigLent SPD3303X

Introduction

Siglent SPD3303X/-E are programmable lab bench power supplies. They can be accessed remotely via a VISA interface.

This package provides a python API for convenient remote programming of the Device via Ethernet/USB. Currently, the module supports setting voltage and current limits, measuring voltage and current and enabling or disabling individual outputs.

The module also provides a CLI tool to conveniently control the power supply from the command line.

Also supports the very similar RS PRO RSPD3303X-E.

Installation

The package is hosted on PyPI. Install it with

pip install python-spd3303x

or

pipenv install python-spd3303x

Examples

To connect to a device that is connected to a LAN and accessible under IP 192.168.0.4:

with SPD3303X.ethernet_device("192.168.0.4") as dev:
    dev.CH1.set_voltage(8)
    dev.CH1.set_current(0.75)
    dev.CH1.set_output(True)
    print(dev.CH1.get_current())
    print(dev.CH1.get_voltage())
    print(dev.CH1.measure_voltage())
    print(dev.CH1.measure_current())
    dev.CH3.set_output(True)

To connect to a USB device:

with SPD3303X.usb_device() as dev:
    dev.CH1.set_voltage(8)
    dev.CH1.set_current(0.75)
    dev.CH1.set_output(True)
    print(dev.CH1.get_current())
    print(dev.CH1.get_voltage())
    print(dev.CH1.measure_voltage())
    print(dev.CH1.measure_current())
    dev.CH3.set_output(True)

CLI

To configure and enable channel 1 on an ethernet device under IP 192.168.0.4:

spd-ctrl -d 192.168.0.4 set 1 --voltage 3.3 --current 0.5 --on

To configure channel 2 on a USB device:

spd-ctrl set 2 -v 5 -c 0.1

To disable (fixed) channel 3 on a USB device with verbose logging:

spd-ctrl -vvv set 3 --off

To list all available options try:

spd-ctrl --help
spd-ctrl set --help