Simple module for splitting binary files into multiple chunks and viceversa (from chunks to original file)
Simple module for splitting files into multiple chunks/parts and viceversa (from chunks/parts to original file).
I made splitnjoin for 3 reasons: 1. Speed-up uploading sessions (it is better to upload small, multiple files instead of a larger one; in case of network failure some parts of file are already online) 2. Surpass ISP not-nice upload limitations about filesizes 3. End the laziness of a boring sunday
Performance of splitting/joining phases can vary greatly depending on hardware configuration (especially the HDD speed).
For instance, let’s try to split a Virtual Box virtual machine sized 8.5+ GB (.vdi): - A system equipped with AMD Ryzen 7, 16 GB DDR4 and an SSD.MD can split the VM in 34 chunks of 250MB each one, in less than 20 seconds - An older notebook (i3, 8GB DDR3, and 5400 RPM HDD) requires 4+ minutes to split it with the same parameters
To read benchmark and performance tests, read sections below (“Perfomance tests”).
Important: don’t use splitnjoin in production enviroments, of course.
A default Python3 installation. It works on every Linux distro and every Windows version.
About hardware requirements: splitting and joining huge files are CPU/RAM intensive tasks and ‘splitnjoin’ is currently in its early days so don’t expect big updates regarding resource optmization soon (I am working on it, that’s for sure).
To put it simple: if you have a system with a fairly capable CPU and 4/8 GB RAM you shouldn’t have any problem splitting huge files (for example, 8+ GB on hard disk).
Install using pip
pip3 install splitnjoin
Splitting by chunk size example
import splitnjoin as snj import os import sys fsplitter = snj.FileProcessor() #Set size of each chunk, for example: 25 mb p_size = 25 #File to split and subdir where to save chunks from_file = "myFile.ext" to_dir = "splitting_dir" absfrom, absto = map(os.path.abspath, [from_file, to_dir]) print('Splitting', absfrom, 'to', absto, 'by', p_size, 'mb...') #Split now fsplitter.split_file(from_file, p_size, to_dir)
Splitting by parts example
import splitnjoin as snj import os import sys fsplitter = snj.FileProcessor() #Set the number of parts you want, for example: 10 p_num = 10 #File to split and subdir where to save parts from_file = "myFile.ext" to_dir = "splitting_dir" absfrom, absto = map(os.path.abspath, [from_file, to_dir]) print('Splitting', absfrom, 'to', absto, 'in', p_num, 'parts...') #Split now fsplitter.split_file_by_parts(from_file, p_num, to_dir)
import splitnjoin as snj import os import sys fjoiner = snj.FileProcessor() #Set the size-value for reading chunks, for example: 25 mb readsize = 25 #Set chunks dir and dest filename from_dir = "splitting_dir" to_file = "joined_myFile.ext" absfrom, absto = map(os.path.abspath, [from_dir, to_file]) print('Joining', absfrom, 'to', absto, 'by', readsize) #Join now fjoiner.join_file(from_dir, readsize, to_file)
I made a simple testing and benchmarking tool (splitting a binary file into chunks of 250MB each one).
Run it like this: python3 -m splitnjoin.snj_benchmark.py.
On my notebook (Intel i3 dual core, 8 GB RAM, 500 GB 5400 RPM disk, Linux Mint 18.3) this is the output:
[+] Generating fake binary file of 1 GB... [+] Please, wait... [+] fake_data.bin written. [+] Writing time: 13.388530897998862 [+] Splitting /home/sergio/Scrivania/splitnjoin/fake_data.bin to /home/sergio/Scrivania/splitnjoin/test by 250 mb... [+] Please, wait... [+] Splitting time: 12.705547745999866 [+] Joining /home/sergio/Scrivania/splitnjoin/test to /home/sergio/Scrivania/splitnjoin/joined_fake_data.bin by 250 mb... [+] Please, wait... [+] Joining time: 15.447953824999786 [+] Calculating md5 hash for both files... [+] Please wait... [+] md5: 98a1c12f80bc9344846e75dc3b406611 for fake_data.bin [+] md5: 98a1c12f80bc9344846e75dc3b406611 for joined_fake_data.bin [+] Hashing time: 7.4639659309996205 [+] Integrity Check OK, the files are identical. [+] Removing test files... [+] fake_data.bin removed. [+] joined_fake_data.bin removed. [+] Removing test dir... [+] Test directory removed.
- [STRIKEOUT:Improve splitting and joining methods to speedup the entire process] (moved to splitnjoiny project)
- [STRIKEOUT:Use multiprocess module to improve performance (if possibile, i’m looking at you, I/O interface)] (moved to splitnjoiny project)
- Using the module for write a basic CLI application and…
- …Cross-compile this CLI application for Linux/macOS/Windows (multiplatform-binary)
Release history Release notifications | RSS feed
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size splitnjoin-0.71.tar.gz (5.3 kB)||File type Source||Python version None||Upload date||Hashes View|