sshpipe 0.5.2

sshpipe provide tools to manage ssh channel to remote hosts.

Table of Contents

• Overview

• sshconfig

  • Loads and dumps

  • SSHConfig Class

• SSHPipe

  • Example

  • Example Explanation

  • Classes and Methods

• SSHPipeClient

• MpLogger and LevelBasedFormatter

  • example

  • Example output

• Clarification of parameters

  • name

  • proecess_key

  • file_prefix and file_suffix

  • file_mode

  • consolidate

  • kwargs

• Change History

• Next Steps

Overview

sshpipe was build as part of Eventor and Sequent to allow distributed processing using SSH. Usually, network based system are using ports to communicate between server and clients. However, in development environment, there may be many developers in need to individual port assignments. The management of such operation can become overwhelming.

With SSH tunneling, each developer can manage its own environment. Using virtualenvs and SSH keys, developer can manage himself connections between servers and clients they are working on.

If you have comments or insights, please don’t hesitate to contact us at [e-mail]

sshconfig

sshconfig is used to read SSH configuration file and give access to information stored there. It can be used also to save SSH configuration.

Loads and dumps

loads(), load() methods are used to read SSH configuration from string stream or file respectively into SSHConfig object. dumps(), dump() methods are used to write SSHConfig object to string stream or file respectively.

SSHConfig Class

SSHConfig class holds SSH configuration as read by load() or loads(). It can then be stored back into SSH configuration file with sshconfig’s dump() and dumps(). *SSHConfig provides get() method to retrieve SSH settings.

Future functionality:

1. validation of configuration.

2. manipulation of configuration (e.g., add key, change flags, etc.)

SSHPipe

SSHPipe class is used to initiate an SSH channel to a process running in remote host. SSHPipe is initiated with the command for the agent process. It would then start the agent (commonly an object of SSHPipeClient or of a class inheriting from it.)

Once agent is started, SSHPipe provides methods to send the agent work assignments. When agent is done or fails, it would communicate back to SSHPipe object. The method response() can be used to retrieve that response.

Example

This example shows a SSHPipe creation from one host to another with. The service in the remote host will accept string message sent via the pipe and would store them into a file.

sshremotehandlerusage.py, below, initiates

 1 import os
 2 import multiprocessing as mp
 3 from sshpipe import SSHPipe
 4 
 5 def run():
 6     agent_dir = '/var/acrisel/sand/acris/sshpipe/sshpipe/sshpipe_examples'
 7     agentpy = os.path.join(agent_dir, "sshremotehandler.py")
 8     host = 'ubuntud01_eventor' # SSH config host name of remote server.
 9 
10     sshagent = SSHPipe(host, agentpy)
11     sshagent.start()
12 
13     if not sshagent.is_alive():
14         print("Agent not alive", sshagent.response())
15         exit(1)
16 
17     sshagent.send("This is life.\n")
18     sshagent.send("This is also life.\n")
19     sshagent.send("This is yet another life.\n")
20     sshagent.send("That is all, life.\n")
21     sshagent.send("TERM")
22 
23     if not sshagent.is_alive():
24         print(sshagent.response())
25         exit()
26 
27     response = sshagent.close()
28     if response:
29         exitcode, stdout, stderr = response
30     print('Response: ', response)
31 
32 if __name__ == '__main__':
33     mp.set_start_method('spawn')
34     run()

The remote agent sshremotehandler.py is would run through SHHPipe and would loop awaiting input on its stdin stream.

 1 import logging
 2 from sshpipe import SSHPipeHandler
 3 
 4 module_logger = logging.getLogger(__file__)
 5 
 6 class MySSHPipeHandler(SSHPipeHandler):
 7 
 8     def __init__(self, *args, **kwargs):
 9         super(MySSHPipeHandler, self).__init__(*args, **kwargs)
10         self.file = None
11 
12     def atstart(self, received):
13         file = "{}{}".format(__file__, ".remote.log")
14         self.module_logger.debug("Opening file: {}.".format(file))
15         self.file = open(file, 'w')
16 
17     def atexit(self, received):
18         if self.file is not None:
19             self.file.close()
20         super(MySSHPipeHandler, self).atexit(received)
21 
22     def handle(self, received):
23         self.file.write(str(received))
24 
25 if __name__ == '__main__':
26     client = MySSHPipeHandler()
27     client.service_loop()

The handler overrides the four methods of SSHPipeHandler. __init__() defines an instance member file, atstart() opens file to which records would be written, atexit() closes the file, and handle() writes received record to file.

Example Explanation

Lets say we run sshremotehandlerusage.py program on some server, ubuntud20

Classes and Methods

SSHPipe(host, command, name=None, user=None, term_message='TERM', config=None, encoding='utf8', callback=None, logger=None)

    SSHPipe establishes connection to remote *host* and runs *command*.  *host* can be ip address, hostname, or SSH host name.
    *name* associates and id to the pipe.  If *user* is provided, it will use for the SSH connectivity.  term_message, is

SSHPipeClient

example

import logging

# create logger
logger = logging.getLogger('simple_example')
logger.setLevel(logging.DEBUG)

# create console handler and set level to debug
ch = logging.TimedRotatingFileHandler()
ch.setLevel(logging.DEBUG)

# create formatter
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')

# add formatter to ch
ch.setFormatter(formatter)

# add ch to logger
logger.addHandler(ch)

# 'application' code
logger.debug('debug message')
logger.info('info message')
logger.warn('warn message')
logger.error('error message')
logger.critical('critical message')

MpLogger and LevelBasedFormatter

Multiprocessor logger using QueueListener and QueueHandler It uses TimedSizedRotatingHandler as its logging handler

It also uses acris provided LevelBasedFormatter which facilitate message formats based on record level. LevelBasedFormatter inherent from logging.Formatter and can be used as such in customized logging handlers.

example

Within main process

import time
import random
import logging
from acris import MpLogger
import os
import multiprocessing as mp

def subproc(limit=1, logger_info=None):
    logger=MpLogger.get_logger(logger_info, name="acrilog.subproc", )
        for i in range(limit):
        sleep_time=3/random.randint(1,10)
        time.sleep(sleep_time)
        logger.info("proc [%s]: %s/%s - sleep %4.4ssec" % (os.getpid(), i, limit, sleep_time))

level_formats={logging.DEBUG:"[ %(asctime)s ][ %(levelname)s ][ %(message)s ][ %(module)s.%(funcName)s(%(lineno)d) ]",
                'default':   "[ %(asctime)s ][ %(levelname)s ][ %(message)s ]",
                }

mplogger=MpLogger(logging_level=logging.DEBUG, level_formats=level_formats, datefmt='%Y-%m-%d,%H:%M:%S.%f')
logger=mplogger.start(name='main_process')

logger.debug("starting sub processes")
procs=list()
for limit in [1, 1]:
    proc=mp.Process(target=subproc, args=(limit, mplogger.logger_info(),))
    procs.append(proc)
    proc.start()

for proc in procs:
    if proc:
        proc.join()

logger.debug("sub processes completed")

mplogger.stop()

Example output

[ 2016-12-19,11:39:44.953189 ][ DEBUG ][ starting sub processes ][ mplogger.<module>(45) ]
[ 2016-12-19,11:39:45.258794 ][ INFO ][ proc [932]: 0/1 - sleep  0.3sec ]
[ 2016-12-19,11:39:45.707914 ][ INFO ][ proc [931]: 0/1 - sleep 0.75sec ]
[ 2016-12-19,11:39:45.710487 ][ DEBUG ][ sub processes completed ][ mplogger.<module>(56) ]

Clarification of parameters

name

name identifies the base name for logger. Note the this parameter is available in both MpLogger init method and in its start method.

MpLogger init’s name argument is used for consolidated logger when consolidate is set. It is also used for private logger of the main process, if one not provided when calling start() method.

proecess_key

process_key defines one or more logger record field that would be part of the file name of the log. In case it is used, logger will have a file per records’ process key. This will be in addition for a consolidated log, if consolidate is set.

By default, MpLogger uses name as the process key. If something else is provided, e.g., processName, it will be concatenated to name as postfix.

file_prefix and file_suffix

Allows to distinguish among sets of logs of different runs by setting one (or both) of file_prefix and file_suffix. Usually, the use of PID and granular datetime as prefix or suffix would create unique set of logs.

file_mode

file_mode let program define how logs will be opened. In default, logs are open in append mode. Hense, history is collected and file a rolled overnight and by size.

consolidate

consolidate, when set, will create consolidated log from all processing logs. If consolidated is set and start() is called without name, consolidation will be done into the main process.

kwargs

kwargs are named arguments that will passed to FileHandler. This include:

file_mode=’a’, for RotatingFileHandler

maxBytes=0, for RotatingFileHandler

backupCount=0, for RotatingFileHandler and TimedRotatingFileHandler

encoding=’ascii’, for RotatingFileHandler and TimedRotatingFileHandler

delay=False, for TimedRotatingFileHandler

when=’h’, for TimedRotatingFileHandler

interval=1, TimedRotatingFileHandler

utc=False, TimedRotatingFileHandler

atTime=None, for TimedRotatingFileHandler

Change History

Next Steps

1. Acknowledgment from handler that SSH pipe was established.

2. SSHMultiPipe to allow management of multiple pipe from a single point.