stackmanager 0.7.1

Utility to manage CloudFormation stacks using YAML configuration file

stackmanager

Utility to manage CloudFormation stacks based upon a Template (either local or in S3) and a YAML configuration file.

Uses ChangeSets to create or update CloudFormation stacks, allowing the ChangeSets to either be automatically applied or applied later (e.g. during a later phase of a build pipeline after review of the ChangeSet).

There are also some utility methods for building a lambda file zip and uploading files to S3. These are to provide some of the AWS SAM CLI functionality while fitting into the workflow and configuration style of stackmanager.

Configuration

The configuration file can either be a single YAML document containing the configuration for a stack for a specific environment and region, or can contain multiple documents for different deployments of that stack to different environments and regions.

Single Environment

The configuration combines together the different values that are typically passed to the CloudFormation command line when creating or updating a CloudFormation stack.

Environment: dev
StackName: "{{ Environment }}-StackManager-Integration"
Region: us-east-1
Parameters:
  Environment: "{{ Environment }}"
Tags:
  Application: StackManager
  Environment: "{{ Environment }}"
Template: integration/template.yaml
Capabilities:
  - CAPABILITY_NAMED_IAM

The configuration file makes use of Jinja2 templating to perform replacements into the StackName, Parameters and Tags values using the Environment and Region values.

It's also possible to make use of Jinja2 filters, for example to lowercase the Environment to pass into a parameter that is going to be used where it's required to be lowercase (e.g. in forming a bucket name):

Parameters:
  LowerEnvironment: "{{ Environment|lower() }}" 

There is not currently support for defining and substituting arbitrary values.

Multiple Environments

---
Environment: all
StackName: "{{ Environment }}-StackManager-Integration-{{ Region }}"
Parameters:
  Environment: "{{ Environment }}"
Tags:
  Application: StackManager
  Environment: "{{ Environment }}"
Template: integration/template.yaml
---
Environment: dev
Region: us-east-1
---
Environment: dev
Region: us-east-2
---
Environment: prod
Region: us-east-1
Tags:
  CostCenter: 200
---
Environment: prod
Region: us-east-2
Tags:
  CostCenter: 300

A multi-environment configuration can be used to combine all the configurations for different versions of a stack across environments and regions, using inheritance from a specially named all Environment to avoid the need to repeat values.

Because of the special handling of the all Environment, it's not possible to deploy an environment named all.

Supported Configuration Values

Name	Required	Templated	Notes
Environment	Yes	No	Name of environment to be deployed
Region	Yes	No	AWS region (e.g. us-east-1) - not required for the 'all' environment
Parameters	No	Yes	Each parameter value is templated, and parameters are inherited from 'all'
Tags	No	Yes	Each tag value is templated, and tags are inherited from 'all'
Capabilities	No	No	List of capabilities (e.g. CAPABILITY_IAM)
Template	No	No	Can be supplied on command line, so not required in configuration

Usage

Stackmanager has the following commands:

• deploy - Create or update a CloudFormation stack for a specific environment/region using a ChangeSet. By default exits after creating the changeset, but can --auto-apply.
• apply - Apply a previously created ChangeSet
• delete - Delete an existing CloudFormation stack
• upload - Uploads a local file to S3. Utility method to prevent the need to use the AWS CLI or other tools.
• build-lambda - Build a Lambda zip file using aws-lambda-builders.

deploy

Usage: stackmanager deploy [OPTIONS]

  Create or update a CloudFormation stack using ChangeSets.

Options:
  -p, --profile TEXT              AWS Profile, will use default or environment
                                  variables if not specified

  -c, --config TEXT               YAML Configuration file  [required]
  -e, --environment TEXT          Environment to deploy  [required]
  -r, --region TEXT               AWS Region to deploy  [required]
  -t, --template TEXT             Override template
  --parameter TEXT...             Override a parameter, can be specified
                                  multiple times
  --change-set-name TEXT          Custom ChangeSet name
  --existing-changes [ALLOW|FAILED_ONLY|DISALLOW]
                                  Whether deployment is allowed when there are
                                  existing ChangeSets
  --auto-apply                    Automatically apply created ChangeSet
  --help                          Show this message and exit.

(since 0.7.0) Existing ChangeSets, if any, will be listed for the stack and depending upon the --existing-changes value (which defaults to ALLOW) this may prevent the deployment. If set to FAILED_ONLY then failed ChangeSets will not prevent a new change from being created, but if set to DISALLOW any existing ChangeSets will prevent new changes.

apply

Usage: stackmanager apply [OPTIONS]

  Apply a CloudFormation ChangeSet to create or update a CloudFormation
  stack. If using --change-set-name then --config --environment are --region
  are required. If using --change-set-id no other values are required
  (although --profile and --region may be needed).

Options:
  -p, --profile TEXT      AWS Profile, will use default or environment
                          variables if not specified

  -c, --config TEXT       YAML Configuration file
  -e, --environment TEXT  Environment to deploy
  -r, --region TEXT       AWS Region to deploy
  --change-set-name TEXT  Name of ChangeSet to apply
  --change-set-id TEXT    Identifier of ChangeSet to apply
  --help                  Show this message and exit.

(since 0.7.0) Using --change-set-id allows you to apply a ChangeSet without loading the configuration. This can be useful in a CI/CD pipeline as this may avoid the need to checkout the repository for applying a change.

delete

Usage: stackmanager delete [OPTIONS]

  Delete a CloudFormation stack.

Options:
  -p, --profile TEXT       AWS Profile, will use default or environment variables if not specified
  -c, --config TEXT        YAML Configuration file  [required]
  -e, --environment TEXT   Environment to deploy  [required]
  -r, --region TEXT        AWS Region to deploy  [required]
  --retain-resources TEXT  Logical Ids of resources to retain
  --help                   Show this message and exit.

Upload

Usage: stackmanager upload [OPTIONS]

  Uploads a File to S3. This might be a large CloudFormation template, or a
  Lambda zip file

Options:
  -p, --profile TEXT   AWS Profile, will use default or environment variables if not specified
  -r, --region TEXT    AWS Region to upload to  [required]
  -f, --filename TEXT  File to upload  [required]
  -b, --bucket TEXT    Bucket to upload to  [required]
  -k, --key TEXT       Key to upload to  [required]
  --help               Show this message and exit.

Build Lambda

Usage: stackmanager build-lambda [OPTIONS]

  Build a Lambda function zip file.

Options:
  -s, --source-dir TEXT  Source directory  [required]
  -o, --output-dir TEXT  Output directory  [required]
  --runtime TEXT         Lambda Runtime  [required]
  --archive-name TEXT    Override archive name (defaults to source directory name)
  --help                 Show this message and exit.

CI/CD Pipeline support

Azure DevOps

Stackmanager will automatically detect when it is running in an Azure DevOps pipeline by looking for the SYSTEM_TEAMPROJECTID environment variable.

It will print ##vso strings under the following circumstances:

• deploy has created a ChangeSet and it has not been auto-applied:
  Sets two variables for the ChangeSet name and identifier. These default to change_set_name and change_set_id (since 0.7.0) but the name of these variables can be changed with the CHANGE_SET_NAME_VARIABLE and CHANGE_SET_ID_VARIABLE environment variables. These values can be used with the apply command in a later stage.
• deploy has created a ChangeSet but it contains no changes:
  This logs a warning (##vso[task.logissue]) and sets the status to SucceededWithIssues (##vso[task.complete]) allowing following steps/jobs/stages to be skipped by checking for the SucceededStatus in a condition.
• deploy or apply fails when applying a ChangeSet:
  This logs an error (##vso[task.logissue])

Configuration

Future plans are to have a global configuration or a larger set of environment variables that can configure behavior.

By default displayed timestamps (e.g. for CloudFormation events) will be displayed in the detected local timezone including the timezone offset. If you specify a timezone using the STACKMANAGER_TIMEZONE environment variable then this will be used instead and the timezone offset will be omitted. Olson Timezones (e.g. America/New_York) are supported.