svg2mod 0.1.6.4

Convert an SVG file to a KiCad footprint.

svg2mod

This is a program / library to convert SVG drawings to KiCad footprint module files.

It includes a modified version of cjlano's python SVG parser and drawing module to interpret drawings and approximate curves using straight line segments. Module files can be output in KiCad's legacy or s-expression (i.e., pretty) formats.

Requirements

• Python 3
• fonttools

Installation

pip install svg2mod

Example

svg2mod -i input.svg

Usage

usage: svg2mod [-h] [-i FILENAME] [-o FILENAME] [-c] [-P] [-v] [--debug] [-x]
               [-d DPI] [-f FACTOR] [-p PRECISION] [--format FORMAT]
               [--name NAME] [--units UNITS] [--value VALUE] [-F DEFAULT_FONT]
               [-l]

Convert Inkscape SVG drawings to KiCad footprint modules.

optional arguments:
  -h, --help            show this help message and exit
  -i FILENAME, --input-file FILENAME
                        Name of the SVG file
  -o FILENAME, --output-file FILENAME
                        Name of the module file
  -c, --center          Center the module to the center of the bounding box
  -P, --convert-pads    Convert any artwork on Cu layers to pads
  -v, --verbose         Print more verbose messages
  --debug               Print debug level messages
  -x, --exclude-hidden  Do not export hidden layers
  -d DPI, --dpi DPI     DPI of the SVG file (int)
  -f FACTOR, --factor FACTOR
                        Scale paths by this factor
  -p PRECISION, --precision PRECISION
                        Smoothness for approximating curves with line
                        segments. Input is the approximate length for each
                        line segment in SVG pixels (float)
  --format FORMAT       Output module file format (legacy|pretty)
  --name NAME, --module-name NAME
                        Base name of the module
  --units UNITS         Output units, if output format is legacy (decimal|mm)
  --value VALUE, --module-value VALUE
                        Value of the module
  -F DEFAULT_FONT, --default-font DEFAULT_FONT
                        Default font to use if the target font in a text
                        element cannot be found
  -l, --list-fonts      List all fonts that can be found in common locations```

SVG Files

svg2mod expects images saved in the uncompressed Inkscape SVG (i.e., not "plain SVG") format. This is so it can associate inkscape layers with kicad layers

• Drawings should be to scale (1 mm in Inscape will be 1 mm in KiCad). Use the --factor option to resize the resulting module(s) up or down from there.
• Paths are fully supported Rect are partially supported.
  • A path may have an outline and a fill. (Colors will be ignored.)
  • A path may have holes, defined by interior segments within the path (see included examples).
  • 100% Transparent fills and strokes with be ignored.
  • Rect supports rotations, but not corner radii.
  • Text Elements are partially supported
• Groups may be used. However, styles applied to groups (e.g., stroke-width) are not applied to contained drawing elements. In these cases, it may be necessary to ungroup (and perhaps regroup) the elements.
• Layers must be named to match the target in kicad. The supported layers are listed below. They will be ignored otherwise.
• If there is an issue parsing an inkscape object or stroke convert it to a path.
  • Use Inkscape's "Path->Object To Path" and "Path->Stroke To Path" menu options to convert these elements into paths that will work.

Layers

This supports the layers listed below. They are the same in inkscape and kicad:

KiCad layer(s)	KiCad legacy	KiCad pretty
F.Cu	Yes	Yes
B.Cu	Yes	Yes
F.Adhes	Yes	Yes
B.Adhes	Yes	Yes
F.Paste	Yes	Yes
B.Paste	Yes	Yes
F.SilkS	Yes	Yes
B.SilkS	Yes	Yes
F.Mask	Yes	Yes
B.Mask	Yes	Yes
Dwgs.User	Yes	Yes
Cmts.User	Yes	Yes
Eco1.User	Yes	Yes
Eco2.User	Yes	Yes
Edge.Cuts	Yes	Yes
F.Fab	--	Yes
B.Fab	--	Yes
F.CrtYd	--	Yes
B.CrtYd	--	Yes

Note: If you have a layer "F.Cu", all of its sub-layers will be treated as "F.Cu" regardless of their names.