A REST API warper for TP-Link Tapo P100/P105.
Project description
TapoPlugAPI
Tapo Plug Api is a python warper that can be easily integrated in any project to control the TP-Link Tapo P100 and P105 plugs.
All endpoints integrated in this package were discovered after a reverse engineering of the firmware Tapo P105, 1.3.2 Build 20210122 Rel. However, due to a lack of information about which parameters to use for each request, other endpoints not exploited yet still need to be added in this package. If you are interested, the full endpoints list are listed below after the examples.
Also, If you want to have fun with the firmware, the link is also below after the examples.
Dependencies:
- Python 3.3+
- requests module (install via pip)
- The dependencies can be satisfied via
pip install -r requirements.txt
Quick Install
pip install tapo-plug
Endpoints:
- Get device information
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getDeviceInfo(device)
print(response)
- Get device running information
from tapo import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getDeviceRunningInfo(device)
print(response)
- Turn ON the plug.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.plugOn(device)
print(response)
- Turn OFF the plug.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.plugOff(device)
print(response)
- Get plug time usage.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getPlugUsage(device)
print(response)
- Change plug alias.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD",
"nickname": "My Awesome Plug!",
}
response = tapoPlugApi.setNickname(device)
print(response)
- Turn OFF the LED.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.ledOff(device)
print(response)
- Turn ON the LED.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.ledOn(device)
print(response)
- Get LED status (ON/OFF).
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getLedInfo(device)
print(response)
- Automatically turns OFF the device when the provided delay is expired.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD",
"delay":60 #seconds
}
response = tapoPlugApi.plugOffCountdown(device)
print(response)
- Automatically turns ON the device when the provided delay is expired.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD",
"delay":60 #seconds
}
response = tapoPlugApi.plugOnCountdown(device)
print(response)
- Get some diagnostic information's.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getDiagnoseStatus(device)
print(response)
- Should get device log, but always empty for me, I leave it here just in case...
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getPlugLog(device)
print(response)
- Can't really tell for what this id used for now.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.qsComponentNego(device)
print(response)
- Get wireless access points information around the plug..
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD"
}
response = tapoPlugApi.getWirelessScanInfo(device)
print(response)
- Update plug WiFi settings.
from tapo_plug import tapoPlugApi
device = {
"tapoIp": "DEVICE IP",
"tapoEmail": "ENTER YOUR TP-LINK EMAIL",
"tapoPassword": "ENTER YOUR TP-LINK PWD",
"ssid": "AP SSID",
"password": "AP PASSWORD",
"key_type":"AP ENC", #wpa2_psk...
"region": "Asia/Tokyo", #Meaningless, but seems required
}
response = tapoPlugApi.setWirelessInfo(device)
print(response)
*Don't forget to change your tapo IP in the dict once this request completed :)
Full endpoints list:
Here are all enpoints used by Tapo P105 found in the firmware.
Endpoints List | Endpoints List |
---|---|
get_device_info | remove_antitheft_rules |
get_device_running_info | set_antitheft_all_enable |
set_device_info | unbindDevice |
device_reset | setAlias |
device_reboot | passthrough |
get_latest_fw | multipleRequest |
fw_download | getWifiBasic |
get_fw_download_state | getFwCurrentVer |
component_nego | getFwDownloadProgress |
qs_component_nego | module.negotiate |
set_qs_info | module.query |
set_qs_extra_info | module.execute |
get_device_time | module.config |
set_device_time | get_factory_info |
get_wireless_scan_info | get_diagnose_status |
set_wireless_info | account_sync |
get_schedule_rules | sync_env |
add_schedule_rule | set_device_log |
edit_schedule_rule | get_device_log |
remove_schedule_rules | set_flash_log |
set_schedule_all_enable | get_flash_log |
get_next_event | get_led_info |
get_schedule_day_runtime | set_led_info |
get_schedule_month_runtime | connect_cloud |
remove_all_schedule_runtime | get_connect_cloud_state |
get_countdown_rules | get_ffs_info |
add_countdown_rule | close_device_ble |
edit_countdown_rule | heart_beat |
remove_countdown_rules | get_device_usage |
get_antitheft_rules | close_device_ble |
add_antitheft_rule | set_inherit_info |
edit_antitheft_rule | get_inherit_info |
exec_atcmd | I think the function exec_atcmd is one of the most interesting because the function name mean it is possible to send AT commands directly to the device, in theory. I've tried everything but nothing worked... In any case all the compatible AT commands are also listed in the firmware, if someone can find how to use it... PLEASE ping me! |
Tapo firmware:
Tapo P105 1.3.2 firmware: http://download.tplinkcloud.com/firmware/P105_1.3.2_20210122_r57063_up_signed_1615802824400.bin
Building modules:
- To build a package to install via
pip
oreasy_install
, execute:python setup.py sdist
- The resulting build will be in
$PWD/dist/tapo_plug-<version>.tar.gz
Project details
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
File details
Details for the file tapo_plug-0.7.tar.gz
.
File metadata
- Download URL: tapo_plug-0.7.tar.gz
- Upload date:
- Size: 8.4 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/3.1.1 pkginfo/1.5.0.1 requests/2.25.1 setuptools/46.3.1 requests-toolbelt/0.9.1 tqdm/4.46.0 CPython/3.8.10
File hashes
Algorithm | Hash digest | |
---|---|---|
SHA256 | 867297e28e91d256b470e1eb90f4218b3f8cb4d6e852ad35d58049ec8619cb99 |
|
MD5 | 0beb164c112a824ca84399a838af63eb |
|
BLAKE2b-256 | 2fe430d923f1bd20fc6117881443b6a7f443d5cafc035201febdb98791dd79b0 |