tapo-plug 0.4

A REST API warper for TP-Link Tapo P100/P105.

TapoPlugAPI

Tapo Plug Api is a python warper that can be easily be integrated in any project to control the TP-Link Tapo P100 and P105 plugs.

The endpoints of the plug were discovered after a reverse engineering of the firmware Tapo 1.3.2 Build 20210122 Rel. Other endpoints not exploited still need to be integrated in this library, but due to lack of information of which parameter to use for each requests I could'n integrate them now (the full list of the endpoints after the examples).

If you also want to have fun with the firmware, the link is also below after the examples.

Dependencies:

• Python 3.3+
• requests module (install via pip)
• The dependencies can be satisfied via pip install -r requirements.txt

Quick Install

pip install tapo-plug

Endpoints:

• Get device information

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getDeviceInfo(device)
print(response)

• Get device running information

from tapo import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getDeviceRunningInfo(device)
print(response)

• Turn ON the plug.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.plugOn(device)
print(response)

• Turn OFF the plug.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.plugOff(device)
print(response)

• Get plug time usage.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getPlugUsage(device)
print(response)

• Change plug alias.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD",
    "nickname": "My Awesome Plug!",
}
  
response = tapoApi.setNickname(device)
print(response)

• Turn OFF the LED.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.ledOff(device)
print(response)

• Turn ON the LED.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.ledOn(device)
print(response)

• Get LED status (ON/OFF).

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getLedInfo(device)
print(response)

• Automatically turns OFF the device when the provided delay is expired.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD",
    "delay":60 #seconds
}
  
response = tapoApi.plugOffCountdown(device)
print(response)

• Automatically turns ON the device when the provided delay is expired.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD",
    "delay":60 #seconds
}
  
response = tapoApi.plugOnCountdown(device)
print(response)

• Get some diagnostic information's.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getDiagnoseStatus(device)
print(response)

• Should get device log, but always empty for me, I leave it here just in case...

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.getPlugLog(device)
print(response)

• Can't really tell for what this id used for now.

from tapo_plug import tapoPlugApi
  
device = {
    "tapoIp": "DEVICE IP",
    "tapoEmail": "ENTER YOUR TP-LINK EMAIL",
    "tapoPassword": "ENTER YOUR TP-LINK PWD"
}
  
response = tapoApi.qsComponentNego(device)
print(response)

Full endpoints list:

Here are all enpoints used by Tapo P105 found in the firmware.

Endpoints List	Endpoints List
get_device_info	remove_antitheft_rules
get_device_running_info	set_antitheft_all_enable
set_device_info	unbindDevice
device_reset	setAlias
device_reboot	passthrough
get_latest_fw	multipleRequest
fw_download	getWifiBasic
get_fw_download_state	getFwCurrentVer
component_nego	getFwDownloadProgress
qs_component_nego	module.negotiate
set_qs_info	module.query
set_qs_extra_info	module.execute
get_device_time	module.config
set_device_time	get_factory_info
get_wireless_scan_info	get_diagnose_status
set_wireless_info	account_sync
get_schedule_rules	sync_env
add_schedule_rule	set_device_log
edit_schedule_rule	get_device_log
remove_schedule_rules	set_flash_log
set_schedule_all_enable	get_flash_log
get_next_event	get_led_info
get_schedule_day_runtime	set_led_info
get_schedule_month_runtime	connect_cloud
remove_all_schedule_runtime	get_connect_cloud_state
get_countdown_rules	get_ffs_info
add_countdown_rule	close_device_ble
edit_countdown_rule	heart_beat
remove_countdown_rules	get_device_usage
get_antitheft_rules	close_device_ble
add_antitheft_rule	set_inherit_info
edit_antitheft_rule	get_inherit_info
exec_atcmd	I think the function exec_atcmd is one of the most interesting because the function name mean it is possible to send AT commands directly to the device, in theory. I've tried everything but nothing worked... In any case all the compatible AT commands are also listed in the firmware, if someone can find how to use it... PLEASE ping me!

Tapo firmware:

Tapo P105 1.3.2 firmware: http://download.tplinkcloud.com/firmware/P105_1.3.2_20210122_r57063_up_signed_1615802824400.bin

Building modules:

• To build a package to install via pip or easy_install, execute:
  • python setup.py sdist
• The resulting build will be in $PWD/dist/tapo_plug-<version>.tar.gz