Skip to main content
Tests Test Coverage Latest release BSD-3 clause license tappy downloads PyPI - Python Version

TAPPY is a tidal analysis package. It breaks down a record of water levels into the component sine waves. It is written in Python and uses the least squares optimization and other functions in SciPy. The focus is to make the most accurate analysis possible. TAPPY only determines the constituents that are calculable according to the length of the time series.

Features

  • Outputs a ‘International Hydrographic Organization - Tidal and Water Level Working Group’ standard XML constituent file.

  • Uses the IHO standard XML constituent file to make a predicted time series. By far the most frequent request that I get.

  • Calculates the node factor at each water elevation measurement. Very important for long time-series (greater than a year).

  • Very accurate ephemeris calculations thanks to the Astrolabe library.

  • Able to read in different input data sets without changing TAPPY or the input data set. All you have to do is create a file that defines the input data set. Thanks to Pyparsing.

  • Added the capability to read compressed files and Internet data streams (actually any URL) directly into TAPPY by using filelike.

  • The time-series does not need to have equal intervals. In fact any length of missing data is allowed (though too much missing will cause a poor analysis).

  • Can adjust the Rayleigh factor that nearby constituents are compared against to determine what constituents can be differentiated.

  • TAPPY chooses the main constituents based upon the length of the time series and infers additional constituents that are known to be specifically related to the main constituents.

  • Can filter the tidal energy out of the input signal using transform (FFT), usgs (PL33), doodson, and boxcar methods. | [CompareTidalFilters]

  • Can use the tidal filters to zero the time-series before determination of tidal constituents.

  • Can pad the usgs, doodson, and boxcar filters with predicted data to minimize edge effects of the filters.

  • Convenience function to fill missing values with the predicted time series

Requirements

Python version 3.7.1 or later

SciPy

Install

# To install...
pip install tappy

TAPPY Citations

Akmal, P. N. E., (2013). Determination of the Permeability of the South Chamorro Seamount in Mariana Forearc Crust Using Pressure Response to Tidal Loading Method. University of Miami. https://scholarship.miami.edu/esploro/outputs/991031448068902976

Barbosa, S. M., (2009). Analysis of trends in North Atlantic tidal amplitudes University of Porto, Portugal (susana.barbosa@fc.up.pt) http://meetingorganizer.copernicus.org/EGU2009/EGU2009-5154.pdf

Bechet, V., Verstraeten, E., Hanert, E. & Deleersnijder, E., (2018). Multiple-year marine connectivity modeling in the Florida Coral Reef Tract to assess Acropora Cervicornis recovery. (Unpublished master’s thesis). Ecole polytechnique de Louvain, Université catholique de Louvain.

Becker, K., Davis, E. E., & Villinger, H. (2022). Long‐Term Observations of Subseafloor Temperatures and Pressures in a Low‐Temperature, Off‐Axis Hydrothermal System in North Pond on the Western Flank of the Mid‐Atlantic Ridge. Geochemistry, Geophysics, Geosystems, 23(9). Portico. https://doi.org/10.1029/2022gc010496

Billings, W. Z., (2018). An Exploration of the Two-Dimensional Poroelastic Properties of Oceanic Crust at the Formation Scale. University of Miami ProQuest Dissertations Publishing,  10846298.

Campos, E. J. D., Kjerfve, B., Cavalcante, G., Vieira, F., & Abouleish, M. (2022). Water exchange across the Strait of Hormuz. Effects of tides and rivers runoff. Regional Studies in Marine Science, 52, 102336. https://doi.org/10.1016/j.rsma.2022.102336

Cucco, A., Martín, J., Quattrocchi, G., Fenco, H., Umgiesser, G., & Fernández, D. A. (2022). Water Circulation and Transport Time Scales in the Beagle Channel, Southernmost Tip of South America. Journal of Marine Science and Engineering, 10(7), 941. https://doi.org/10.3390/jmse10070941

Desmet, N., (2019). Modelling coral larvae exchanges between the Great Barrier Reef and outer reefs. Ecole polytechnique de Louvain, Université catholique de Louvain. Prom. : Hanert, Emmanuel ; Deleersnijder, Eric. http://hdl.handle.net/2078.1/thesis:19591

Ferrarin, C., Roland, A., Bajo, M., Umgiesser, G., Cucco, A., Davolio, S., Buzzi, A., Malguzzi, P., & Drofa, O. (2013). Tide-surge-wave modelling and forecasting in the Mediterranean Sea with focus on the Italian coast. Ocean Modelling, 61, 38–48. https://doi.org/10.1016/j.ocemod.2012.10.003

Ferrarin, C., Zaggia, L., Paschini, E., Scirocco, T., Lorenzetti, G., Bajo, M., Penna, P., Francavilla, M., D’Adamo, R., & Guerzoni, S. (2013). Hydrological Regime and Renewal Capacity of the Micro-tidal Lesina Lagoon, Italy. Estuaries and Coasts, 37(1), 79–93. https://doi.org/10.1007/s12237-013-9660-x

Ferrarin, C., Tomasin, A., Bajo, M., Petrizzo, A., & Umgiesser, G. (2015). Tidal changes in a heavily modified coastal wetland. Continental Shelf Research, 101, 22–33. https://doi.org/10.1016/j.csr.2015.04.002

Gaeta, M. G., Samaras, A. G., Federico, I., Archetti, R., Maicu, F., & Lorenzetti, G. (2016). A coupled wave–3-D hydrodynamics model of the Taranto Sea (Italy): a multiple-nesting approach. Natural Hazards and Earth System Sciences, 16(9), 2071–2083. https://doi.org/10.5194/nhess-16-2071-2016

Lavaud, L., Bertin, X., Martins, K., & Arnaud, G. (2019). The contribution of short wave breaking in the storm surge associated with Klaus (January 24, 2009) in the Southern Bay of Biscay. Coastal Sediments 2019. https://doi.org/10.1142/9789811204487_0123

Neves, L. J. P. F., Barbosa, S. M., & Pereira, A. J. S. C. (2009). Indoor radon periodicities and their physical constraints: a study in the Coimbra region (Central Portugal). Journal of Environmental Radioactivity, 100(10), 896–904. https://doi.org/10.1016/j.jenvrad.2009.06.017

Pérez-Ruzafa, A., De Pascalis, F., Ghezzo, M., Quispe-Becerra, J. I., Hernández-García, R., Muñoz, I., Vergara, C., Pérez-Ruzafa, I. M., Umgiesser, G., & Marcos, C. (2019). Connectivity between coastal lagoons and sea: Asymmetrical effects on assemblages’ and populations’ structure. Estuarine, Coastal and Shelf Science, 216, 171–186. https://doi.org/10.1016/j.ecss.2018.02.031

Vergara-Chen, C., Pérez-Ruzafa, A., De Pascalis, F., Ghezzo, M., Quispe-Becerra, J. I., Hernández-García, R., Muñoz, I., Pérez-Ruzafa, I. M., Umgiesserb, G. and Marcos, C., (2018). Connectivity between coastal lagoons and sea: Asymmetrical effects on assemblages’ and populations’ structure. https://ridda2.utp.ac.pa/handle/123456789/4432

Vinas, K. A., (2013). Mariana forearc crust CORK pressure data: observations and implications. University of Miami. https://scholarship.miami.edu/esploro/outputs/991031448074702976

Žust, L., Fettich, A., Kristan, M., & Ličer, M. (2021). HIDRA 1.0: deep-learning-based ensemble sea level forecasting in the northern Adriatic. Geoscientific Model Development, 14(4), 2057–2074. https://doi.org/10.5194/gmd-14-2057-2021

Please forward any citation of TAPPY to tim at cerazone.net.

Contributions

Any help is appreciated. Best would be a pull request on Github or Bitbucket or if you would like to make a bunch of changes I can assign you developer privileges to the source code repository. Just contact me at tim at cerazone.net.

Metadata

Release files for tappy 1.1.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for tappy 1.1.0
File Size Uploaded
tappy-1.1.0.tar.gz 751.8 kB Details

Built distribution (wheel)

Table of built distributions (wheels) for tappy 1.1.0
File Interpreter ABI Platform
tappy-1.1.0-py3-none-any.whl Python 3 none any Details

Total release size: 852.2 kB

Release files / tappy-1.1.0.tar.gz

Download URL tappy-1.1.0.tar.gz
Size 751.8 kB
Tags Source
SHA-256 checksum
How to use checksums
b6d5e91713af211cffbd24549180e9f0ff88d6573243246bee161252e611eb45
BLAKE2b-256 checksum
How to use checksums
beaf04592248393cad972c8a7ba9fb196a65d3c8e5f0f354af5ab1b57add9acd
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/5.0.0 CPython/3.11.0

Release files / tappy-1.1.0-py3-none-any.whl

Download URL tappy-1.1.0-py3-none-any.whl
Size 100.4 kB
Tags Python 3
SHA-256 checksum
How to use checksums
d98bfb358d87b57710836e91f2f37b9ee2a406a4f9aed6f2a480a548f8986e01
BLAKE2b-256 checksum
How to use checksums
ff0bff1ab70b53806251931ea857070e323e11315b83d414437634090dea0c40
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via twine/5.0.0 CPython/3.11.0

Release history Release notifications | RSS feed

1.2.3

2 release files

1.2.2

2 release files

1.2.1

2 release files

1.2.0

2 release files

This release

1.1.0 This release

2 release files

1.0.5

2 release files

1.0.4

1 release file

1.0.1

1 release file

1.0.0

1 release file

0.10.4

1 release file

0.10.3

1 release file

0.10.2

1 release file

0.10.1

1 release file

0.10.0

1 release file

0.9.6

1 release file

0.9.5

1 release file

0.9.4

1 release file

0.9.3

1 release file

0.9.2

1 release file

0.9.0

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page