Skip to main content

A Simple tc command wrapper tool. Easy to set up traffic control of network bandwidth/latency/packet loss/packet-corruption to a network interface.

Project description

Home-page: https://github.com/thombashi/tcconfig
Author: Tsuyoshi Hombashi
Author-email: tsuyoshi.hombashi@gmail.com
License: MIT License
Description-Content-Type: UNKNOWN
Description:
tcconfig
==========
.. image:: https://travis-ci.org/thombashi/tcconfig.svg?branch=master
:target: https://travis-ci.org/thombashi/tcconfig
:alt: Linux CI test status

.. image:: https://img.shields.io/github/stars/thombashi/tcconfig.svg?style=social&label=Star
:target: https://github.com/thombashi/tcconfig
:alt: GitHub repository


Summary
---------
A Simple tc command wrapper tool. Easy to set up traffic control of network bandwidth/latency/packet loss/packet-corruption to a network interface.

Traffic control features
------------------------

Traffic shaping target
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Apply traffic shaping rules to specific targets:

- Outgoing/Incoming packets
- Source/Destination IP-address/network (IPv4/IPv6)
- Source/Destination ports

Moreover, exclude from shaping rules from specific targets:

- Source/Destination IP-address/network (IPv4/IPv6)
- Source/Destination ports

Available parameters
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The following parameters can set to network interfaces:

- Network bandwidth rate ``[G/M/K bps]``
- Network latency ``[microseconds/milliseconds/seconds/minutes]``
- Packet loss rate ``[%]``
- Packet corruption rate ``[%]``
- Packet duplicate rate ``[%]``
- Packet reordering rate ``[%]``

.. image:: docs/gif/tcset_example.gif

Usage
=======

Set traffic control (``tcset`` command)
-----------------------------------------
``tcset`` is a command to add traffic control rule to a network interface (device).

e.g. Set a limit on bandwidth up to 100Kbps
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: console

# tcset --device eth0 --rate 100k

e.g. Set network latency
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You can use time units (such as us/sec/min/etc.) to designate delay time.

Set 100 milliseconds network latency
'''''''''''''''''''''''''''''''''''''''''''''''''''
.. code-block:: console

# tcset --device eth0 --delay 100ms


Set 10 seconds network latency
'''''''''''''''''''''''''''''''''''''''''''''''''''
.. code-block:: console

# tcset --device eth0 --delay 10sec

Set 0.5 minutes (30 seconds) network latency
'''''''''''''''''''''''''''''''''''''''''''''''''''
.. code-block:: console

# tcset --device eth0 --delay 0.5min

e.g. Set 0.1% packet loss
^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: console

# tcset --device eth0 --loss 0.1

e.g. All of the above at once
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: console

# tcset --device eth0 --rate 100k --delay 100 --loss 0.1

e.g. Specify the IP address of traffic control
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: console

# tcset --device eth0 --delay 100 --network 192.168.0.10

e.g. Specify the IP network and port of traffic control
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. code-block:: console

# tcset --device eth0 --delay 100 --network 192.168.0.0/24 --port 80

Delete traffic control (``tcdel`` command)
------------------------------------------

``tcdel`` is a command to delete traffic shaping rules from a network interface (device).

e.g. Delete traffic control of ``eth0``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You can delete all of the shaping rules for the ``eth0`` with ``-a``/``--all`` option:

.. code-block:: console

# tcdel --device eth0 --all

Display traffic control configurations (``tcshow`` command)
-----------------------------------------------------------
``tcshow`` is a command to display the current traffic control settings for network interface(s).

Example
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. code-block:: console

# tcset --device eth0 --delay 10 --delay-distro 2 --loss 0.01 --rate 0.25M --network 192.168.0.10 --port 8080
# tcset --device eth0 --delay 1 --loss 0.02 --rate 500K --direction incoming
# tcshow --device eth0
{
"eth0": {
"outgoing": {
"dst-network=192.168.0.10/32, dst-port=8080": {
"delay": "10.0",
"loss": "0.01",
"rate": "250K",
"delay-distro": "2.0"
},
"dst-network=0.0.0.0/0": {}
},
"incoming": {
"dst-network=0.0.0.0/0": {
"delay": "1.0",
"loss": "0.02",
"rate": "500K"
}
}
}
}


For more information
----------------------
More examples are available at
http://tcconfig.rtfd.io/en/latest/pages/usage/index.html

Installation
============
Installing from PyPI
------------------------------
``tcconfig`` can be installed from `PyPI <https://pypi.python.org/pypi>`__ via
`pip <https://pip.pypa.io/en/stable/installing/>`__ (Python package manager) command.

.. code:: console

sudo pip install tcconfig


Installing from files
------------------------------
The following package includes ``tcconfig`` and dependency packages.
This package is for environments which cannot access to
`PyPI <https://pypi.python.org/pypi>`__ directly.

How to install:

1. Navigate to ``https://github.com/thombashi/tcconfig/releases/``
2. Download the latest version of ``tcconfig_wheel.tar.gz``
3. Copy ``tcconfig_wheel.tar.gz`` to installation target
4. ``tar xvf tcconfig_wheel.tar.gz``
5. ``cd tcconfig_wheel/``
6. ``./install.sh``


Dependencies
============
Python 2.7+ or 3.4+

Linux packages
--------------
- ``iproute``/``iproute2``/``iproute-tc`` (mandatory: required for ``tc`` command)
- ``iptables`` (optional: required to when you use ``--iptables`` option)

Linux kernel module
----------------------------
- ``sch_netem``

Python packages
---------------
Dependency python packages are automatically installed during
``tcconfig`` installation via pip.

- `DataPropery <https://github.com/thombashi/DataProperty>`__
- `ipaddress <https://pypi.python.org/pypi/ipaddress>`__
- `logbook <http://logbook.readthedocs.io/en/stable/>`__
- `pyparsing <https://pyparsing.wikispaces.com/>`__
- `six <https://pypi.python.org/pypi/six/>`__
- `subprocrunner <https://github.com/thombashi/subprocrunner>`__
- `typepy <https://github.com/thombashi/typepy>`__
- `voluptuous <https://github.com/alecthomas/voluptuous>`__

Optional
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- `netifaces <https://bitbucket.org/al45tair/netifaces>`__
- Suppress excessive error messages if this package installed

Test dependencies
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- `allpairspy <https://github.com/thombashi/allpairspy>`__
- `pingparsing <https://github.com/thombashi/pingparsing>`__
- `pytest <http://pytest.org/latest/>`__
- `pytest-runner <https://pypi.python.org/pypi/pytest-runner>`__
- `tox <https://testrun.org/tox/latest/>`__


Documentation
===============
http://tcconfig.rtfd.io/

Troubleshooting
=================
http://tcconfig.readthedocs.io/en/latest/pages/troubleshooting.html

Keywords: traffic control,tc,traffic shaping,bandwidth,latency,packet loss
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Environment :: Console
Classifier: Intended Audience :: Developers
Classifier: Intended Audience :: Information Technology
Classifier: Intended Audience :: System Administrators
Classifier: Intended Audience :: Telecommunications Industry
Classifier: License :: OSI Approved :: MIT License
Classifier: Operating System :: POSIX
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python :: 2
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3.4
Classifier: Programming Language :: Python :: 3.5
Classifier: Programming Language :: Python :: 3.6
Classifier: Topic :: System :: Networking
Classifier: Topic :: System :: Systems Administration
Requires-Python: >=2.7,!=3.0.*,!=3.1.*,!=3.2.*

Project details


Release history Release notifications | RSS feed

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

tcconfig-0.17.0.tar.gz (44.1 kB view details)

Uploaded Source

Built Distribution

tcconfig-0.17.0-py2.py3-none-any.whl (45.1 kB view details)

Uploaded Python 2Python 3

File details

Details for the file tcconfig-0.17.0.tar.gz.

File metadata

  • Download URL: tcconfig-0.17.0.tar.gz
  • Upload date:
  • Size: 44.1 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No

File hashes

Hashes for tcconfig-0.17.0.tar.gz
Algorithm Hash digest
SHA256 6c587983aa4ef51235dc8ea061791bc852f23f715c7091be4091c7c1cd655147
MD5 f0fa37c9e1d809c78ae81feb941e26a9
BLAKE2b-256 2828ed0713a6d6d8427de3c4a8bb3f2995c12e6b84401c04b4cc6feefd76a93a

See more details on using hashes here.

File details

Details for the file tcconfig-0.17.0-py2.py3-none-any.whl.

File metadata

File hashes

Hashes for tcconfig-0.17.0-py2.py3-none-any.whl
Algorithm Hash digest
SHA256 d11ff1141a96dc1f4b794a875edaf5acfb10ca3ba0244558d7baffd27d716368
MD5 3620452d1f3e6c2cdcae77f783003337
BLAKE2b-256 10f04ef26fc82381ff5babf27eb2a5aace4bb3eb1e23c18d44f4218ce45a171e

See more details on using hashes here.

Supported by

AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Pingdom Monitoring Sentry Error logging StatusPage Status page