Skip to main content

Convert the telemetry stream from the TCS EGSE into a STAMP compatible interface.

Project description

TCS EGSE STAMP Converter

This package converts the telemetry stream from the TCS EGSE to a STAMP specific interface format.

The TCS EGSE is a thermal controller that will be used to control the temperature of the PLATO Camera during ground testing. STAMP is a software package that provides data handling facilities to support thermal tests on spacecraft equipment.

Install

$ python3 -m pip install tcs-stamp-converter

If you need to install a new version of the package:

$ python3 -m pip install --upgrade tcs-stamp-converter

How to use

$ tcs_stamp -h
usage: tcs_stamp [-h] [--version] [--verbose] --tcs TCS [--stamp STAMP] [--fractional_time] [--rate RATE]

Convert TCS EGSE Telemetry to a STAMP EGSE interface format.

optional arguments:
  -h, --help            show this help message and exit
  --version             Prints the version number of this script.
  --verbose, -v         Print verbose messages. If this option is specified multiple times, output will be more verbose.
  --tcs TCS             The TCS EGSE endpoint, IP address or hostname and port number separated by a colon.
  --stamp STAMP         The STAMP endpoint, IP address or hostname and port number separated by a colon.
  --fractional_time, -f
                        The timestamp sent to STAMP must contain 3 fractional digits.
  --rich                Use the 'rich' module to pretty print a table for the Housekeeping values.
  --rate RATE, -r RATE  The outgoing telemetry rate to STAMP [seconds].

An endpoint shall be specified as 'hostname:port'.

NOTE: When running the script on Windows, the script might not be found because e.g. the PATH is not pointing to the installation. You will get an error saying: 'tcs_stamp' is not recognized as an internal or external command, operable program or batch file. In that case, fix the PATH to find the script or you can run the script as follows:

python -m tcsstamp -h

Notice there is no underscore in the tcsstamp name if called like this.

Description

The script is a bridge between the TCS EGSE, which provides the telemetry as a stream of housekeeping values with their associated time, and STAMP which provides data handling functionality. The output format of the TCS EGSE doesn't match the input format of STAMP. This script serves as a bridge converting the TCS EGSE output format into the required STAMP input format.

The hostname and port should be known for both systems. The script connects to the TCS EGSE using a plain unix socket connection. The hostname and TCP port must be given as an argument. The script also connects to STAMP when the hostname and port are given as an argument, otherwise the data is sent to stdout.

An example usage in a local network might look like this:

$ tcs_stamp --tcs 10.33.178.10:6666 --stamp 10.33.178.12:4444

You can use the simple echo server which is also installed with the package. This server will echo the received stream of data to stdout. The echo_server listens to port 4444.

$ echo_server 
Connected by ('127.0.0.1', 64725)
'10.01.2021 16:12:01\tch1_pid_cv\t0000\t15.0000\n10.01.2021 16:12:01\tch1_pid_sp\t0000\t40.0000\n10.01.2021 16:12:01\tch1_pid_ts\t0000\t1.0000\n10.01.2021 16:12:01\tch2_pid_sp\t0000\t0.0000\n10.01.2021 16:12:01\tch2_pid_ts\t0000\t12.5000\n10.01.2021 16:12:01\tch1_pid_proctime\t0000\t11.7856\n10.01.2021 16:12:01\tch1_pwm_proctime\t0000\t11.7974\n10.01.2021 16:12:01\tch2_clkheater_ticks\t0000\t172120.8617\n10.01.2021 16:12:01\tch2_pid_proctime\t0000\t0.0356\n10.01.2021 16:12:01\tcpuload_realtime\t0000\tCPU1: 65.4% CPU2: 70.0% MEM: 1.4% free [3.5MB/244.4MB] CORE: 112.1MB\n10.01.2021 16:12:01\tni9401_external_clkheater_timeout\t0000\t171.4284\n10.01.2021 16:12:01\tch1_heater_status\t0000\t00001\n10.01.2021 16:12:01\tch1_pid_error\t0000\t001\n10.01.2021 16:12:01\tch2_heater_status\t0000\t00000\n10.01.2021 16:12:01\tch2_pid_error\t0000\t001\n10.01.2021 16:12:01\telapsed_time\t0000\t1d23h37m10s\n10.01.2021 16:12:01\tlogging_files\t0000\t2820\n10.01.2021 16:12:01\tlogging_packets\t0000\t13291709\n'
'10.01.2021 16:12:01\top_mode\t0000\t6\n10.01.2021 16:12:01\tstart_time\t0000\t20210108 16:3451 UTC\n10.01.2021 16:12:01\tsync_status\t0000\t000000011\n10.01.2021 16:12:01\ttask_is_running\t0000\t1\n10.01.2021 16:12:01\tch1_iout\t0000\t0.586\n10.01.2021 16:12:01\tch1_vdc\t0000\t28.198\n10.01.2021 16:12:01\tch1_vout\t0000\t24.589\n10.01.2021 16:12:01\tch2_iout\t0000\t1.195\n10.01.2021 16:12:01\tch2_vdc\t0000\t28.173\n10.01.2021 16:12:01\tch2_vout\t0000\t28.093\n10.01.2021 16:12:01\tpsu_status\t0000\t0001\n10.01.2021 16:12:01\tpsu_vdc\t0000\t28.396\n10.01.2021 16:12:01\tch1_pout\t0000\t14399.8\n10.01.2021 16:12:01\tch2_pout\t0000\t33568.3\n10.01.2021 16:12:01\tambient_rtd\t0000\t20.8579\n10.01.2021 16:12:01\tfee_rtd_1\t0000\t0.1757\n10.01.2021 16:12:01\tfee_rtd_1_status\t0000\t00001\n10.01.2021 16:12:01\tfee_rtd_2\t0000\t0.1627\n10.01.2021 16:12:01\tfee_rtd_2_status\t0000\t00001\n10.01.2021 16:12:01\tfee_rtd_3\t0000\t0.1907\n10.01.2021 16:12:01\tfee_rtd_3_status\t0000\t00001\n10.01.2021 16:12:01\tfee_rtd_status\t0000\t00001\n10.01.2021 16:12:01\tfee_rtd_tav\t0000\t0.1757\n10.01.2021 16:12:01\tinternal_rtd\t0000\t28.2824\n10.01.2021 16:12:01\tspare_rtd_1\t0000\t0.1213\n10.01.2021 16:12:01\tspare_rtd_1_status\t0000\t00001\n10.01.2021 16:12:01\tspare_rtd_2\t0000\t0.1506\n10.01.2021 16:12:01\tspare_rtd_2_status\t0000\t00001\n10.01.2021 16:12:01\tspare_rtd_3\t0000\t0.1535\n10.01.2021 16:12:01\tspare_rtd_3_status\t0000\t00001\n10.01.2021 16:12:01\tspare_rtd_status\t0000\t00001\n'

When you don't specify the --stamp option, the housekeeping will be sent to stdout:

$ tcs_stamp --tcs localhost:6666
10.01.2021 12:50:07	storage_mmi	0000	681.5GB
10.01.2021 12:50:10	ambient_rtd	0000	20.8766
10.01.2021 12:50:10	fee_rtd_1	0000	0.1733
10.01.2021 12:50:10	fee_rtd_1_status	0000	00001
10.01.2021 12:50:10	fee_rtd_2	0000	0.1655
10.01.2021 12:50:10	fee_rtd_2_status	0000	00001
10.01.2021 12:50:10	fee_rtd_3	0000	0.1881
10.01.2021 12:50:10	fee_rtd_3_status	0000	00001
10.01.2021 12:50:10	fee_rtd_status	0000	00001
10.01.2021 12:50:10	fee_rtd_tav	0000	0.1733

If you like to see the housekeeping in a proper table, you can use the --rich option. That will print out a table like below instead of the output above. Please note that the 'rich' module must be pip installed for this to work.

Table of All Telemetry

The STAMP interface expects the timestamp, sensor name, sensor number, and value to be separated with a TAB character and each entry ended with a newline. That is what you see in the above example, only the hk number is ignored by STAMP and therefore left 0000 for all hk entries.

The timestamp is given in the format 'DD.MM.YYYY HH.MM.SS', with optionally a 3 fractional digits appended when the --fractional_time option is given.

tcs_stamp --tcs localhost:6666 --fractional_time
10.01.2021 13:01:04.949	storage_mmi	0000	681.5GB
10.01.2021 13:01:07.836	ch1_pid_cv	0000	15.0000
10.01.2021 13:01:07.836	ch1_pid_sp	0000	40.0000
10.01.2021 13:01:07.836	ch1_pid_ts	0000	1.0000
10.01.2021 13:01:07.836	ch2_pid_sp	0000	0.0000
10.01.2021 13:01:07.836	ch2_pid_ts	0000	12.5000

Telemetry is sent out by the TCS EGSE at 1Hz and only values that have changed are transmitted. When you need a lower telemetry rate, use the --rate option which basically defines the number of seconds to wait before sending the next batch of housekeeping. The following command will send housekeeping out every 10 seconds.

$ tcs_stamp --tcs 10.33.178.10:6666 --rate 10 

Errors

You can expect the following error when:

BrokenPipeError: [Errno 32] Broken pipe: When the connection to STAMP or the echo_server was terminated at their side.

ConnectionResetError: [WinError 10054] An existing connection was forcibly closed by the remote host This is the same as a BrokenPipeError, but on Windows.

ConnectionError: STAMP: Connection refused to localhost:25001.: When no application is listening on the other side, e.g. STAMP or echo_server not started? This could also be the case for TCS EGSE in which case you should check if the TCS EGSE is switched on.

TimeoutError: STAMP: socket timeout error for 10.33.178.12:25001: This usually happens when the IP address is wrong or unreachable. Check if you can ping to that IP address.

WARNING:root:Format error: no new housekeeping values received.: You might get a lot of these warnings when you have set a password for the MMI user, but didn't log into the device. This occurs even if you have logged in using a Remote Desktop client.

Glossary

  • PLATO: PLAnetary Transits and Oscillations of stars
  • EGSE: Electric Ground Support Equipment
  • STAMP: System for Thermal Analysis, Measurement, and Power supply control

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for tcs-stamp-converter, version 0.3.6
Filename, size File type Python version Upload date Hashes
Filename, size tcs_stamp_converter-0.3.6-py2.py3-none-any.whl (16.2 kB) File type Wheel Python version py2.py3 Upload date Hashes View
Filename, size tcs-stamp-converter-0.3.6.tar.gz (11.2 kB) File type Source Python version None Upload date Hashes View

Supported by

AWS AWS Cloud computing Datadog Datadog Monitoring DigiCert DigiCert EV certificate Facebook / Instagram Facebook / Instagram PSF Sponsor Fastly Fastly CDN Google Google Object Storage and Download Analytics Pingdom Pingdom Monitoring Salesforce Salesforce PSF Sponsor Sentry Sentry Error logging StatusPage StatusPage Status page