This is a pre-production deployment of Warehouse, however changes made here WILL affect the production instance of PyPI.
Latest Version Dependencies status unknown Test status unknown Test coverage unknown
Project Description

td is a non-offensive, per project ToDo manager.

Heavily inspired by [devtodo][devtodo], but with some nasty features, like:

Oh, and it will automagically pick up your existing [devtodo][devtodo] lists!

## screenshot ![screenshot](https://copy.com/GYCQMKw3CF8h)

## requirements * python3 * distribute (for setup) * nosetests (for test-suite)

## installation

Through [PyPI][pypi] `sh $ pip install td ` or from sources `sh $ python setup.py install `

## usage

#### show To show your complete ToDo list, just run td without any parameters. `sh $ td `

#### add Typing `sh $ td a(dd) [<parent index>] ` will start an interactive item adding session.

Optional parent_index parameter specifies item, under which the new one will be nested.

Instead of using interactive session, one can also specify them in command line, like below. `sh $ td a(dd) [<parent index>] --<field name> <field value> $ td a(dd) [<parent index>] -<first letter of the field name> <field value> `

#### edit Typing `sh $ td e(dit) <index> ` where index is an item’s index, will start an interactive item editing session.

Similarly to a(dd), one can also specify new values in command line. `sh $ td e(dit) <index> --<field name> <field value> $ td e(dit) <index> -<first letter of the field name> <field value> ` One special cause here is reparenting, done like below. `sh $ td e(dit) <index> --parent <parent index> `

#### remove Typing `sh $ td r(emove) <index> ` will remove item under index.

#### done/undone Typing `sh $ td d(one) <index> ` will mark item under index as done, while typing `sh $ td D <index> $ td undone <index> ` will mark it as not done.

#### modify Performs a one time modification of the list and saves it to disk.

sort

Used to sort items on the list.

General syntax is `sh $ td (v|m|o) -s [+|-]{,}[[<level>]{:}[<field_name>](+|-)] $ td (v|m|o) --sort [+|-]{,}[[<level>]{:}[<field_name>](+|-)] ` but it looks cryptic, so lets split it into some more specific use cases.

To sort everything ascending by name, type `sh $ td (v|m|o) -s $ td (v|m|o) -s + ` To sort everything descending by name, type `sh $ td (v|m|o) -s - ` To sort specific level by name, type (as before, + goes for ascending and - for descending) `sh $ td (v|m|o) -s <level>(+|-) ` To sort everything by a field other than name, type `sh $ td (v|m|o) -s <field name>(+|-) ` To sort specific level by a field other than name, type `sh $ td (v|m|o) -s <level>:<field name>(+|-) ` And to specify muliple rules, use a comma (,). For example this `sh $ td (v|m|o) -s +,1-,2:priority+ ` will sort items at the second level ascending by priority, item at the first level descending by name, and all other levels ascending by name.

Note that to sort by multiple conditions, just supply them one by one and they’ll be applied in order of appearance.

purge

Typing `sh $ td (v|m|o) -p $ td (v|m|o) --purge ` will remove all completed items.

done/undone

Used to batch mark items as done or not.

General syntax is `sh $ td (v|m|o) -d [[<level>]{:}[[<field name>=]<regexp>]] $ td (v|m|o) --done [[<level>]{:}[[<field name>=]<regexp>]] ` `sh $ td (v|m|o) -D [[<level>]{:}[[<field name>=]<regexp>]] $ td (v|m|o) --undone [[<level>]{:}[[<field name>=]<regexp>]] ` As with sort, we’ll split it into use cases.

To mark all items, type `sh $ td (v|m|o) -(d|D) ` To mark all items at specific level, type `sh $ td (v|m|o) -(d|D) <level> ` To mark items matching regexp at any field and level, type `sh $ td (v|m|o) -(d|D) <regexp> ` To mark items matching regexp at specific field and any level, type `sh $ td (v|m|o) -(d|D) <field name>=<regexp> ` To mark items matching regexp at any field and specific level, type `sh $ td (v|m|o) -(d|D) <level>:<regexp> ` To mark items matching regexp at specific field and level, type `sh $ td (v|m|o) -(d|D) <level>:<field name>=<regexp> ` Of course, these rules can also be chained using comma (,).

#### view Affects how the list is displayed on the screen. It does not modify the list physically and only takes effect for one run, all settings are then gone.

Shares the interface of modify command, with following additions.

nocolor

Disables any possible color codes, i.e. prints pure textual data. Might be useful for storing and/or reusing the output.

`sh $ td v --no-color `

#### options Describes persistent options, which will be applied every next time td is run.

Shares the interface of modify command, with following additions.

global Stores options globally (in ~/.tdrc), which means that they will be applied to all lists.

Note: Local options take precedence over global ones.

`sh $ td o -g <other options> $ td o --global <other options> `

[devtodo]: http://swapoff.org/devtodo1.html [pypi]: https://pypi.python.org/pypi/td

Release History

Release History

0.4

This version

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

0.3

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

0.2.1

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

0.2

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

0.1

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

Download Files

Download Files

TODO: Brief introduction on what you do with files - including link to relevant help section.

File Name & Checksum SHA256 Checksum Help Version File Type Upload Date
td-0.4.tar.gz (28.0 kB) Copy SHA256 Checksum SHA256 Source Jul 19, 2014

Supported By

WebFaction WebFaction Technical Writing Elastic Elastic Search Pingdom Pingdom Monitoring Dyn Dyn DNS HPE HPE Development Sentry Sentry Error Logging CloudAMQP CloudAMQP RabbitMQ Heroku Heroku PaaS Kabu Creative Kabu Creative UX & Design Fastly Fastly CDN DigiCert DigiCert EV Certificate Rackspace Rackspace Cloud Servers DreamHost DreamHost Log Hosting