teensytoany 0.2.1

A pythonic way to access the teensytoany board

Python TeensyToAny

A pythonic way to access the teensytoany board

• Documentation: https://python-teensytoany.readthedocs.io.
• See: https://github.com/ramonaoptics/teensy-to-any

Features

• TODO

Credits

This package was created with Cookiecutter and the hmaarrfk/cookiecutter-pypackage project template.

History

0.2.0 (2023-11-07)

• Add a timeout property to simplify modifying the command timeout.

0.1.0 (2023-09-29)

• Provide access the new mcu command that reveals the microcontroller used at the time of firmware programming.

• Provide an internal method that can be used by developers to update to the latest firmware.

0.0.34 (2023-08-26)

• Small fixup in how reading the Teensy's registers is done to ensure better forward compatibility.

0.0.33 (2023-08-26)

The following features require teensy-to-any version 0.0.23 or greater

• Add support for gpio_digital_pulse.
• Add support for analog_pulse.
• Add support for new value parameter for gpio_pin_mode.
• Add support to read the data returned from spi_transfer_bulk.

0.0.32 (2023-08-30)

• Address bugs in reading the values from Teensy's registers.

0.0.31 (2023-08-21)

• Add the ability to read and write to the teensy's registers.

0.0.30 (2023-04-03)

• Increase default timeout to 0.2 seconds from 0.1. This helps receive error messages from missed I2C communications.
• Return an error if no response is returned from a standard command indicating a timeout.

0.0.29 (2023-03-06)

• Try to avoid racy conditions in version reading
• Flush buffers upon startup to help with crash recovery.

0.0.28 (2023-03-04)

• Make the error message when no device is found more human friendly.

0.0.27 (2022-10-16)

• Use packaging instead of distutils for version identification

0.0.26 (2021-09-13)

• added function spi_read_byte enabling the user to read SPI register.

0.0.25 (2021-07-14)

• added function analog_read enabling the user to read analog signals.

0.0.24 (2021-06-03)

• added i2c_read_payload and i2c_write_payload functions which allows users to read and write a contiguous payload of bytes

0.0.23 (2021-02-13)

• Ensure compatibility with pyserial 3.X
• Power a start_poweroff parameter to TeensyPower to start the device in the on state.
• Added the ability to close and open the device without deleting the python object.

0.0.22 (2020-06-18)

• Added the ability to control a power switch that is connected to the nominally on port.

0.0.20 (2019-12-14)

• Added capabilities for SPI and Analog functions

0.0.16 (2019-11-30)

• TeensyPower destructor will not raise an error when the device had failed to open.

0.0.15 (2019-11-29)

• TeensyPower devices will automatically poweroff the output when closed.

0.0.14 (2019-11-29)

• Added the specialized TeensyPower driver.

0.0.13 (2019-11-20)

• Added a few more serial numbers to the teensytoany.known_devices

0.0.1 (2019-11-07)

• First release on PyPI.