Connect to Upside Down Labs devices using Timeflux
Project description
This plugin allows you to stream data from Upside Down Labs BioAmp. Two modes are proposed: through the audio interface and through the USB interface.
Installation
First, make sure that Timeflux is installed. You can then install this plugin in the timeflux environment:
$ conda activate timeflux $ pip install timeflux_upsidedownlabs
Audio interface
Look at this example graph. You can run it like this:
$ conda activate timeflux $ timeflux -d examples/audio.yaml
The signal can be visualized [here](http://localhost:8000).
USB interface
First, you must install the firmware on the board.
Download the Arduino IDE on your computer, and then:
Start the Arduino IDE
Select the serial port under “Tools”
Select your Arduino board under “Tools”
Upload the standard firmata sketch to your Arduino with:
File -> Examples -> Firmata -> Standard Firmata
You’re all set!
An example graph can be found here. You can run it like this:
$ conda activate timeflux $ timeflux -d examples/uart.yaml
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Hashes for timeflux-upsidedownlabs-0.1.dev6.tar.gz
Algorithm | Hash digest | |
---|---|---|
SHA256 | b4513833d97906236c71a4a295fd64df9ede7427c1e0f7982b4f271cc9219e33 |
|
MD5 | 36cd3651e64ce193bf03aa72846bf697 |
|
BLAKE2b-256 | 26189d9402b22cff872dfa94dc56309e5fb51cfab1fd8435093c6e0c4d7f2737 |
Hashes for timeflux_upsidedownlabs-0.1.dev6-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | ed65c9c88c37b4432dcb9f680865a839d836067ffe09b95bb3d53df85f5706ce |
|
MD5 | 1b365c02aa0dbfad75f1e41c8a67306c |
|
BLAKE2b-256 | 1e04b4afff9fcd27077de67886f86c3adbc9186d2a78a2b45d4d437df46e54f8 |