titta 2.0.0rc10

Titta is a toolbox for using eye trackers from Tobii with Python, specifically offering integration with PsychoPy.

Titta is a toolbox for using eye trackers from Tobii Pro AB with Python, specifically offering integration with PsychoPy. A Matlab version that integrates with PsychToolbox is also available from https://github.com/dcnieho/Titta. For a similar toolbox for SMI eye trackers, please see www.github.com/marcus-nystrom/SMITE.

Cite as: Niehorster, D.C., Andersson, R. & Nystrom, M. (2020). Titta: A toolbox for creating PsychToolbox and Psychopy experiments with Tobii eye trackers. Behavior Research Methods. doi: 10.3758/s13428-020-01358-8

For questions, bug reports or to check for updates, please visit https://github.com/marcus-nystrom/Titta.

To minimize the risk of missing samples, the current repository uses TittaPy (pip install TittaPy), a C++ wrapper around the Tobii SDK, to pull samples made available from the eye tracker.

To get started

pip install titta (Currently does not work. Still waiting for Titta to be registered at PyPi. Pip install wheel [see Releases] or clone repository instead.)

or

python -m pip install titta

Then run read_me.py from the 'demos' folder (first change the monitor settings and the eye tracker name in read_me.py).

To get started with the Tobii Pro Lab integration

1. Open read_read_me_TalkToProLab.py in PsychoPy.
2. Download Tobii Pro Lab
3. Open a new External Presenter Project in Pro Lab. The Project name must be the same as the project name in read_read_me_TalkToProLab.py.
4. In PsychoPy, run read_read_me_TalkToProLab.py (first change the monitor settings and the eye tracker name).

Tested on Windows 10 using PsychoPy 2022.1.3 using Python 3.8. Ideally, make sure that the eye tracker is detected and works in the Tobii Eye Tracker Manager before trying to use it with Titta.

Contents

The toolbox consists of two main parts:

The Titta class

The Titta class is the main workhorse of this toolbox, providing a wrapper around the Tobii Pro SDK, and a convenient graphical user interface (rendered through PsychoPy) for participant setup, calibration and validation. Only the Titta.calibrate() participant setup and calibration interface requires PsychoPy.

The TalkToProLab class

The TalkToProLab class provides an implementation of Tobii Pro Lab's External Presenter interface, allowing experiments to be created and run from Python with PsychoPy or other presentation methods, while recording, project management, recording playback/visualization and analysis can be performed in Tobii Pro Lab.

Usage

As demonstrated in the demo scripts, the toolbox is configured through the following interface:

1. Retrieve (default) settings for eye tracker of interest: settings = Titta.getDefaults('tracker model name'); Supported eye trackers and their corresponding model names in the Tobii Pro SDK/Titta are:

   Eye tracker	Model name
   Tobii Pro Spectrum	Tobii Pro Spectrum
   Tobii Pro Fusion	Tobii Pro Fusion
   Tobii Pro TX300	Tobii TX300
   Tobii Pro T60 XL	Tobii T60 XL
   Tobii Pro Nano	Tobii Pro Nano
   Tobii Pro Spark	Tobii Pro Spark
   Tobii Pro X3-120	Tobii Pro X3-120 or Tobii Pro X3-120 EPU
   Tobii Pro X2-60	X2-60_Compact
   Tobii Pro X2-30	X2-30_Compact
   Tobii Pro X60	Tobii X60
   Tobii Pro X120	Tobii X120
   Tobii Pro T60	Tobii T60
   Tobii Pro T120	Tobii T120
   Tobii 4C (Upgrade Key required)	IS4_Large_Peripheral

   Eye trackers marked in bold font have been tested. Note that the VR eye trackers are not supported by Titta. Also note that the Tobii 4C cannot be used for research purposes without buying the Pro Upgrade Key, and is compatible with Titta only after this purchase. Unfortunately, the Pro Upgrade Key is no longer sold by Tobii.

2. Change settings from their defaults if wanted.

3. Create a Titta instance using this settings struct: tracker = Titta(settings);

4. Interact with the eye tracker using the Titta API.

5. When calling Titta.calibrate(), a participant setup and calibration interface is shown. For each screen, several keyboard hotkeys are available to activate certain functionality. By default, the hotkey for each button is printed in the button's label.