tkz 1.0.11

TikZ Figure Generator

TikZ-based Figure Generator

There is a need for professional-looking figures. Good quality figures in publications are clear and easy to understand. This means they should not be badly pixelated. Though it is tempting to take a screen shot of your figures to then include in your papers, this is a sure way to produce poor-quality images. Often, the text will be hard to read, the lines will be pixelated, and important details will be lost. One solution to this is vector-based figures. Tools like MatPlotLib can already generate vector pdf images. However, this raises another problem. Vector plots of large data sets can consume significant disk space. Even a paper with a few figures, each a megabyte can become too large to email. This is very a practical concern.

A typical journal paper column width is only about 3.4 in (8.636 cm). This means figures which are large on your screen with reasonably-sized text will be illegible when put into a paper. When the text of axis labels, tick labels, and legends is made large enough to read, it will take up much valuable space that would be better spent on the actual content of the figure. On top of that, libraries like MatPlotLib will impose generous margins around the figure, which further consume space. And when these margins are made smaller, there is no guarantee that some of the text will not be cut off.

Even without considering these problems, the text of typical figures will not match the type face of the rest of your document, especially if your document is written in LaTeX, which uses its own fonts.

This library solves all these problems. It produces vector-based figures using the popular LaTeX plugin called TikZ. The output files are native LaTeX files, so all the text and formatting should be consistent with the rest of your document. By default, this library automatically performs fast line-simplification to produce the same look with less data. So, large data sets can be plotted without consuming much disk space. By default, tick labels are moved inside the plotting box so more space is used for the actual plotting. Legends are moved to the bottom of the figure, beneath the x-axis label. This way, text can be large enough to be legible without taking away from valuable space from the content of the figure. The space required for axis labels, tick labels, and legends is carefully calculated ensuring just the right amount of space is provided around the content of the figure. This ensures the overall figure sizes matches exactly what was requested by the user.

Currently, the most commonly used plotting types are supported: plots, scatter plots, fills, and heat maps (in the form of hexagonal binning). However, much more is planned for the future.

Example

The following is a code example for creating a plot with this library::

import numpy as np
import tkz

t = np.linspace(0, 2*np.pi, 10000)
x = np.cos(t)
y = np.sin(t)

fig = tkz.graph('test_basic')
fig.plot(x, y)
fig.xlabel = 'x axis'
fig.ylabel = 'y axis'
fig.equal = True
fig.render()

First, a figure object is created with tkz.graph(). This object holds settings pertaining to the whole figure, like the width, height, and font size. Second, path objects are added with fig.plot(). This object holds everything pertaining to a particular path, like the x and y arrays, the line width, color, opacity, pattern style, and label. To render the figure, the .render() method is called on the fig object. Note, the default setting is for the LaTeX file to be generated as a standalone file with its own document class declaration and preamble. When it is standalone, this Python library will then try to automatically compile the LaTeX file with the pdflatex command. If fig.standalone is set to False then only the TikZ draw commands will be included. This file can then be input within the tikzpicture environment of another LaTeX file.

Global Options

tkz.config.<option> = <value>

There are some options you can set for all figures in your file:

Option	Description	Default Value
skip	flag to skip all subsequent plotting	False
directory	directory of the generated figure files	None
standalone	flag to create standalone LaTeX file	True
savepng	flag to convert pdf to png too	False
savetex	flag to keep the LaTeX source file	False

Because compiling LaTeX files can be slow, it might be helpful sometimes to turn off all tkz renders. This can be done by setting skip to True. If directory is left as None then the figures will be generated in the current working directory. If the standalone flag is True, this library will attempt to call the pdflatex command line program to compile the .tex file and produce a pdf image. Because you may need a rasterized version of your figure after all (see Microsoft Office's lack of support for pdf vector images), the savepng option will produce a png version of the image from the pdf version. This requires the program pdftoppm from the poppler command line utilities package, and that the standalone option is set to True. By default, after a standalone LaTeX file is created and the pdf file is compiled, the source LaTeX file will be deleted. If you want to save the LaTeX file for inspection or tweaking, set the savetex option to True.

Figure Options

fig = tkz.graph(<options>)

All of the following options can be set after the graph object is created or during as class arguments.

Property	Description	Default Value
filename	string of file without extension	'fig'
width	width of pdf image in centimeters	8.636 cm (3.4 in)
height	height of pdf image in centimeters	5.337 cm (2.1 in)
xmin	x-axis minimum	min of x
xmax	x-axis maximum	max of x
ymin	y-axis minimum	min of y
ymax	y-axis maximum	max of y
xpad	use padding on x axis	False
ypad	use padding on y axis	True
xlog	flag to use log scaling on x axis	False
ylog	flag to use log scaling on y axis	False
equal	flag to use axis equal scaling	False
fontsize	font size in points	9 pt
xlabel	x-axis label	None
ylabel	y-axis label	None
xaxis	flag to show x axis	True
yaxis	flag to show y axis	True
xgrid	flag to show x grid	True
ygrid	flag to show y grid	True
xsubgrid	flag to show x sub-grid	True
ysubgrid	flag to show y sub-grid	True
xtick	flag to show x ticks	True
ytick	flag to show y ticks	True
ticksize	size of tick marks (cm)	0.1 cm
xout	flag to put x-axis ticks outside	False
yout	flag to put y-axis ticks outside	False
rowmajor	flag to layout legend row major	False
columns	number of legend columns	None
preamble	added string of LaTeX code in preamble	None

If either the width or height is specified, but not both, the other dimension will be calculated based on an aspect ratio equal to the golden ratio.

Setting equal to True is equivalent to plt.axis('equal') in MatPlotLib.

Data Set Options

Plot

tkz.plot(x, y=None, color=None, opacity=1.0, width=THICK,
        pattern=None, label=None, simp=True, fmt=None)

Create a graph of a connected path defined by x and y. If y is not provided, the values in x will be used as the y values and the integer indices will be used for the x values.

• color should be a 6-character hexadecimal value for the color in the form 0xRRGGBB. If color is not given, a value will automatically be chosen from the color map.

• opacity should be a floating-point value between 0 and 1.

• width is the line width in pixels. The following values are predefined:

  Name	Pixels
  THINEST	0.05
  ULTRA_THIN	0.10
  VERY_THIN	0.20
  THIN	0.40
  SEMI_THICK	0.60
  THICK	0.80
  VERY_THICK	1.20
  ULTRA_THICK	1.60
  THICKEST	100.00

• pattern is the line pattern index. The following values are predefined.

  Name	Index	Pattern
  SOLID	0	----
  DASHDOTTED	1	-.-.
  DASHED	2	- -
  DENSELYDOTTED	3	....
  DOTTED	4	. .
  LOOSELYDOTTED	5	. .

• label is the text with which to identify the path in the legend. Unlike MatPlotLib, if any path object has a label defined, a legend will be created. There is no additional legend command required.

• simp is the boolean flag used to control whether the path will be subject to line simplification. Please note that TeX is memory limited and can run out of memory for large data sets if simp is not True.

• fmt is an optional string used to specify any additional formatting options which TikZ would understand. This option is meant for users who are experienced using the TikZ library.

Scatter

tkz.scatter(x, y=None, radius=0.03, color=None, opacity=1.0,
        marker=CIRCLES, label=None, fmt=None)

Create a scatter plot of circles or dots defined by x and y. If y is not provided, the values in x will be used as the y values and the integer indices will be used for the x values.

• radius is the radius of the circles or dots in units of pixels.

• color should be a 6-character hexadecimal value for the color in the form 0xRRGGBB. If color is not given, a value will automatically be chosen from the color map.

• opacity should be a floating-point value between 0 and 1.

• marker is the style of the scatter plot. More styles might be added in the future, but for now the possible values are

  Name	Index
  CIRCLES	0
  DOTS	1

• label is the text with which to identify the path in the legend. Unlike MatPlotLib, if any path object has a label defined, a legend will be created. There is no additional legend command required.

• fmt is an optional string used to specify any additional formatting options which TikZ would understand. This option is meant for users who are experienced using the TikZ library.

Note that no simp option is available, because it would not make sense for there to be.

Fill

fill(x, y=None, z=None, color=None, opacity=1.0,
        label=None, simp=True, fmt=None)

Create a filled-area plot defined by x and y. If y is not provided, the values in x will be used as the y values and the integer indices will be used for the x values. If z is also provided, the area between y and z will be filled.

• color should be a 6-character hexadecimal value for the color in the form 0xRRGGBB. If color is not given, a value will automatically be chosen from the color map.
• opacity should be a floating-point value between 0 and 1.
• label is the text with which to identify the path in the legend. Unlike MatPlotLib, if any path object has a label defined, a legend will be created. There is no additional legend command required.
• simp is the boolean flag used to control whether the path will be subject to line simplification. Please note that TeX is memory limited and can run out of memory for large data sets if simp is not True.
• fmt is an optional string used to specify any additional formatting options which TikZ would understand. This option is meant for users who are experienced using the TikZ library.

No edge options exist, but it is simple enough to create another plot on top of a filled-area, providing the edges. This in fact does not consume any more disk space than having a single fill command with edges.

Hex Bin

hexbin(x, y=None, radius=0.2, color=None, opacity=1.0, scaling=0,
        label=None, fmt=None)

Create a 2D mesh of hexagons, representing the binning of the values in x and y. If y is not provided, the values in x will be used as the y values and the integer indices will be used for the x values.

• radius is the distance from the center of the hexagon to any vertex of the hexagon in units of centimeters. By default, hexagons with higher bin values will be more saturated with whatever the color is that is chosen for that path. Hexagons with lower bin values will be more white, blending into the color of the background. However, if radius is negative, then rather than varying the color saturation, the hexagons will vary their size. The hexagons with the highest bin values will be the full radius in size. Hexagons with lower bin values will be smaller.
• color should be a 6-character hexadecimal value for the color in the form 0xRRGGBB. If color is not given, a value will automatically be chosen from the color map.
• opacity should be a floating-point value between 0 and 1.
• scaling represents a bending of the otherwise linear relationship between the bin count and color saturation (or hexagon size). If scaling is greater than zero, color (size) will be skewed towards saturated (large). If scaling is less than zero, color (size) will be skewed towards white (small).
• label is the text with which to identify the path in the legend. Unlike MatPlotLib, if any path object has a label defined, a legend will be created. There is no additional legend command required.
• fmt is an optional string used to specify any additional formatting options which TikZ would understand. This option is meant for users who are experienced using the TikZ library.

Note that no simp option is available, because it is unnecessary since all the points are compressed into bins.

Dual Axes

This library does not support dual axes. This is on purpose. See https://blog.datawrapper.de/dualaxis/.