Add the ability to measure EC to your hardware application with a fully digital interface.
Project description
Mod-EC
Add the ability to measure EC to your hardware application with a fully digital interface.
Summary ℹ️
- EC range of 0.05 µS/cm to 1 S/cm with appropriate probe
- Accuracy ±0.002 mS/cm
- Resolution 0.001 mS/cm
- Temperature compensated
- I²C, UART, and USB interfaces
- 1-Wire interface for DS18B20 temperature sensor
- 25x15 mm for castellated or DIP mounting
- Single, dual, and triple point calibration
Use
Design ✒️
Adding a module to your own design is straightforward. You'll need:
- bus connection to your controlling device (I2C, UART, USB)
- clean, preferably isolated, power supply
- probe connection (U.FL, BNC, terminal block)
Some resources to get started:
- Schematic of the I2C Isolated Dev Board
- Design Incorporation section of the Datasheet
Ask a question 🤙
Buy One
Mod-EC - just the sensor
Isolated Qwiic Dev Board - all the components needed to use the module
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
uFire_Mod_EC-0.9.0.tar.gz
(7.8 kB
view hashes)
Built Distribution
Close
Hashes for uFire_Mod_EC-0.9.0-py3-none-any.whl
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 | 956057f16adfada0c6370b5e94e29593824a1d2b95fde1afe4ca64e2c96788fc |
|
| MD5 | a64c88c6ee77bdf5af60e4ff8928a301 |
|
| BLAKE2-256 | 37fe3de28ca0b3bb48643e10a3e6df5a9cdb9f88ea00ae15d0c53bbf6512f048 |