Skip to main content

Python support for quantities with units

Project description

Provides support for quantities and units, which strictly disallow invalid operations between incompatible quantities. For example, we cannot add 2 metres to 5 seconds, because this doesn’t make sense.


From Wikipedia:

The Mars Climate Orbiter was intended to enter orbit at an altitude of 140-150 km (460,000-500,000 ft.) above Mars. However, a navigation error caused the spacecraft to reach as low as 57 km (190,000 ft.). The spacecraft was destroyed by atmospheric stresses and friction at this low altitude. The navigation error arose because a NASA subcontractor (Lockheed Martin) used Imperial units (pound-seconds) instead of the metric system.


This module is distributed via PyPI. So, you can do:

pip install units


easy_install units

or, you can download a bundle yourself at

If you want the latest:

pip install -e hg+

How to Use

Make Quantities

Units are objects that you use to make quantities:

>>> from units import unit
>>> metre = unit('m')
>>> print(metre(7) + metre(11))
18 m

You can mix and match these quantities in some ways:

>>> from units import unit
>>> metre = unit('m')
>>> second = unit('s')
>>> print(metre(10) / second(2))
5 m / s
>>> print(metre(10) ** 3)
1000 m * m * m

But if you make a mistake, you get a safety net:

>>> from units import unit
>>> unit('m')(5) + unit('s')(5)
Traceback (most recent call last):

Make Your Own Units

Before you start making your own units, you should check out the units that you get for free:

>>> import units.predefined
>>> units.predefined.define_units()

It includes all the official SI units, some units for measuring time such as days and weeks, units for volumes like cups, gallons and litres, imperial units and more.

You’ve already seen how to make your own simple units. You call the unit function and give it a string:

>>> from units import unit
>>> blog = unit('blog')
>>> print(blog(3))
3 blog

These units are automatically incompatible with other units.

You can combine units with multiplication and division to make new units:

>>> from units import unit
>>> blogs_per_network = unit('blog') / unit('network')
>>> print(blogs_per_network(2.34))
2.34 blog / network

There’s a built-in shortcut for making new units that are scalar multiples of other units:

>>> from units import unit, scaled_unit
>>> sickle = scaled_unit('sickle', 'knut', 29)
>>> galleon = scaled_unit('galleon', 'sickle', 17)
>>> knut = unit('knut')
>>> galleon(3.0) + sickle(1.0) - knut(25.0) == knut(1483)

There’s also a shortcut for giving names to slightly more complicated units:

>>> from units import unit, named_unit
>>> from units.predefined import define_units
>>> define_units()
>>> twp = named_unit('tweetpack', ['tweet', 'meme'], ['day'], 5)
>>> # A tweetpack is 5 tweetmemes per day
>>> print(twp(2))
2 tweetpack
>>> tweet, meme, day = [unit(x) for x in ['tweet', 'meme', 'day']]
>>> print(twp(5) - (tweet(5) * meme(4) / day(2)))
3.0 tweetpack

If two units are compatible, you can convert between them easily:

>>> from units import unit
>>> from units.predefined import define_units
>>> define_units()
>>> furlongs_per_fortnight = unit('fur') / unit('fortnight')
>>> kph = unit('km') / unit('h')
>>> print(furlongs_per_fortnight(kph(100)))
167024.576473 fur / fortnight

You can also use lower-level constructors to make your own units and quantities. The ways shown above are easier, though.


This module doesn’t solve problems with numerical accuracy or floating point conversions:

>>> from units import unit
>>> unit('m')(5) / unit('m')(7)

More dangerously, certain internal operations have implicit arithmetic that can surprise you:

>>> from units import unit, scaled_unit
>>> sickle = scaled_unit('sickle', 'knut', 29)
>>> galleon = scaled_unit('galleon', 'sickle', 17)
>>> knut = unit('knut')
>>> galleon(3) + sickle(1) - knut(25) == galleon(3)

Using Modified Python

In units-enhanced Python, you can do:

print(2cm / 0.5 s)
-> 4.0 cm / s

Units-enhanced Python is a version of PyPy with built-in support for units. You can find it in the unitPython directory. Essentially, apply the supplied patches to r66797 of PyPy. If you’re on a suitable UNIX, the included unitPython/ does this for you.

@requires: U{Python<>} >= 2.5 @since: 2009-Aug-10 @status: under development

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

units-0.05.tar.gz (18.9 kB view hashes)

Uploaded Source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page