universal_usbtmc 0.3.3

Universal Python Interface For Different USBTMC Backends.

Github: https://github.com/pklaus/universal_usbtmc

A Universal USBTMC Package for Python

universal_usbtmc is an effort to fix the clutter of USBTMC implementations for Python.

This project provides a unified interface to the different ways/ implementations (“backends”) to talk to USBTMC devices (“instruments”). This allows you to write very platform independent code.

It also comes with an interactive USBTMC shell.

You can use the following instrument implementations (“backends”) in your software:

• USBTMC via the Linux kernel module

• USBTMC via python-usbtmc (uses libusb)

• TCP Socket (remote connection e.g. via rpi-usbtmc-gateway)

• VXI-11 (an RPC-based TCP connection, not really usbtmc)

• RS232

As already mentioned, you’ll automatically gain a large deal of platform independence as any operating system will support at least some of those backends.

Installation

pip install universal_usbtmc

Usage

This software is mainly made to be used by other software, not humans.

It comes, however, with a small command line tool called usbtmc-shell. You can use it to test if the different backends work for you. (Or for trying to talk to a new device you just bought.) See below in the backends sections on how to use it with different backends.

Backends

To communicate with your device, the following backends are available:

• linux_kernel

• python_usbtmc

• tcp_socket

• python_vxi11

• pyserial

Backend Details

linux_kernel

Uses the Linux Kernel Module usbtmc

The source code of the kernel module can be found here.

To use this backend, you must be using a Linux kernel and have the kernel module compiled and loaded. Look for the device /dev/usbtmc0 to check your USBTMC device is detected.

You can run the usbtmc shell to check if everything works OK:

usbtmc-shell --backend linux_kernel /dev/usbtmc0

python_usbtmc

Uses the libusb-/PyUSB-based python-usbtmc.

Here’s how to use the usbtmc shell with it:

usbtmc-shell --backend python_usbtmc USB::0x1ab1::0x0588::INSTR

To use the backend python_usbtmc, you need to install the requirements python-usbtmc and pyusb:

pip install https://github.com/alexforencich/python-usbtmc/archive/master.zip
pip install https://github.com/walac/pyusb/archive/master.zip

The backend works on Mac OS X and Linux.

tcp_socket

This backend connects to your instrument via TCP sockets. How is this possible if the instrument itself doesn’t have an Ethernet port? You can put it on the net with rpi-usbtmc-gateway!

To connect using the tcp_socket backend, run:

usbtmc-shell --backend tcp_socket 192.168.0.21
# or
usbtmc-shell --backend tcp_socket TCPIP::192.168.0.21::5025::SOCKET

This backend has no external dependencies and works on all operating systems.

python_vxi11

This backend connects to your instrument via VXI-11. This is not USBTMC in a way but the interface with SCPI commands is usually the same.

Uses the Python library python-vxi11.

To connect using the python_vxi11 backend, run:

usbtmc-shell --backend python_vxi11 192.168.0.21
# or
usbtmc-shell --backend python_vxi11 TCPIP::192.168.0.21::INSTR

To use this backend, install python-vxi:

pip install python-vxi11

The backend should work on all operating systems.

pyserial

This backend uses PySerial to connect to your device via RS232. On some devices, this is more stable than the USBTMC connection.

usbtmc-shell --backend pyserial ASRL::/dev/ttyUSB0,9600::INSTR

Off course, you need to install PySerial first! The backend works on all operating systems.

Resources

• A project with a similar aim is python-ivi