vban-cmd 1.4.1

Python interface for the VBAN RT Packet Service (Sendtext)

VBAN CMD

This python interface allows you to get and set Voicemeeter parameter values over a network.

It may be used standalone or to extend the Voicemeeter Remote Python API

There is no support for audio transfer in this package, only parameters.

For an outline of past/future changes refer to: CHANGELOG

Tested against

• Basic 1.0.8.4
• Banana 2.0.6.4
• Potato 3.0.2.4

Requirements

• Voicemeeter
• Python 3.10 or greater

Installation

Pip

Install vban-cmd package from your console

pip install vban-cmd

Use

Simplest use case, use a context manager to request a VbanCmd class of a kind.

Login and logout are handled for you in this scenario.

__main__.py

import vban_cmd


class ManyThings:
    def __init__(self, vban):
        self.vban = vban

    def things(self):
        self.vban.strip[0].label = "podmic"
        self.vban.strip[0].mute = True
        print(
            f"strip 0 ({self.vban.strip[0].label}) mute has been set to {self.vban.strip[0].mute}"
        )

    def other_things(self):
        info = (
            f"bus 3 gain has been set to {self.vban.bus[3].gain}",
            f"bus 4 eq has been set to {self.vban.bus[4].eq}",
        )
        self.vban.bus[3].gain = -6.3
        self.vban.bus[4].eq = True
        print("\n".join(info))


def main():
    with vban_cmd.api(kind_id, **opts) as vban:
        do = ManyThings(vban)
        do.things()
        do.other_things()

        # set many parameters at once
        vban.apply(
            {
                "strip-2": {"A1": True, "B1": True, "gain": -6.0},
                "bus-2": {"mute": True},
            }
        )


if __name__ == "__main__":
    kind_id = "banana"
    opts = {
        "ip": "<ip address>",
        "streamname": "Command1",
        "port": 6980,
    }

    main()

Otherwise you must remember to call vban.login(), vban.logout() at the start/end of your code.

kind_id

Pass the kind of Voicemeeter as an argument. kind_id may be:

• basic
• banana
• potato

Available commands

Strip

The following properties are available.

• mono: boolean
• solo: boolean
• mute: boolean
• label: string
• gain: float, -60 to 12
• A1 - A5, B1 - B3: boolean
• comp: float, from 0.0 to 10.0
• gate: float, from 0.0 to 10.0
• limit: int, from -40 to 12

example:

vban.strip[3].gain = 3.7
print(strip[0].label)

Gainlayers

• gain: float, from -60.0 to 12.0

example:

vban.strip[3].gainlayer[3].gain = 3.7

Gainlayers are defined for potato version only.

Levels

The following properties are available.

• prefader

example:

print(vban.strip[3].levels.prefader)

Level properties will return -200.0 if no audio detected.

Bus

The following properties are available.

• mono: boolean
• eq: boolean
• eq_ab: boolean
• mute: boolean
• label: string
• gain: float, -60 to 12

example:

vban.bus[4].eq = true
print(vban.bus[0].label)

Modes

The following properties are available.

• normal: boolean
• amix: boolean
• bmix: boolean
• composite: boolean
• tvmix: boolean
• upmix21: boolean
• upmix41: boolean
• upmix61: boolean
• centeronly: boolean
• lfeonly: boolean
• rearonly: boolean

The following methods are available.

• get(): Returns the current bus mode

example:

vban.bus[4].mode.amix = True

print(vban.bus[2].mode.get())

Levels

The following properties are available.

• all

example:

print(vban.bus[0].levels.all)

levels.all will return -200.0 if no audio detected.

Command

Certain 'special' commands are defined by the API as performing actions rather than setting values. The following methods are available:

• show() : Bring Voiceemeter GUI to the front
• shutdown() : Shuts down the GUI
• restart() : Restart the audio engine
• reset(): Applies the reset config. (phys strip B1, virt strip A1, gains, comp, gate 0.0, mute, mono, solo, eq false)

The following properties are write only and accept boolean values.

• showvbanchat: boolean
• lock: boolean

example:

vban.command.restart()
vban.command.showvbanchat = true

Multiple parameters

• apply Set many strip/bus parameters at once, for example:

vban.apply(
    {
        "strip-2": {"A1": True, "B1": True, "gain": -6.0},
        "bus-2": {"mute": True},
    }
)

Or for each class you may do:

vban.strip[0].apply(mute: true, gain: 3.2, A1: true)
vban.vban.outstream[0].apply(on: true, name: 'streamname', bit: 24)

Config Files

vban.apply_config(<configname>)

You may load config files in TOML format. Three example configs have been included with the package. Remember to save current settings before loading a user config. To set one you may do:

import vban_cmd
with vban_cmd.api('banana') as vban:
    vban.apply_config('example')

will load a config file at configs/banana/example.toml for Voicemeeter Banana.

Base Module

VbanCmd class

vban_cmd.api(kind_id: str, **opts: dict)

You may pass the following optional keyword arguments:

• ip: str, ip or hostname of remote machine
• streamname: str, name of the stream to connect to.
• port: int=6980, vban udp port of remote machine.
• subs: dict={"pdirty": True, "ldirty": False}, controls which updates to listen for.
  • pdirty: parameter updates
  • ldirty: level updates

Event updates

To receive event updates you should do the following:

• register your app to receive updates using the vban.subject.add(observer) method, where observer is your app.
• define an on_update(subject) callback function in your app. The value of subject may be checked for the type of update.

See examples/observer for a demonstration.

Level updates are considered high volume, by default they are NOT listened for.

Each of the update types may be enabled/disabled separately.

example:

import vban_cmd
# Listen for level updates
opts = {
    "ip": "<ip address>",
    "streamname": "Command1",
    "port": 6980,
    "subs": {"ldirty": True},
}
with vban_cmd.api('banana', **opts) as vban:
    ...

vban.event

You may also add/remove event subscriptions as necessary with the Event class.

example:

vban.event.add("ldirty")

vban.event.remove("pdirty")

# get a list of currently subscribed
print(vban.event.get())

vban.pdirty

True iff a parameter has been changed.

vban.ldirty

True iff a level value has been changed.

vban.sendtext(script)

Sends a script block as a string request, for example:

vban.sendtext("Strip[0].Mute=1;Bus[0].Mono=1")

vban.public_packet

Returns a Voicemeeter rt data packet object. Designed to be used internally by the interface but available for parsing through this read only property object. States not guaranteed to be current (requires use of dirty parameters to confirm).

Errors

• errors.VMCMDErrors: Base VMCMD error class.

Tests

First make sure you installed the development dependencies

Then from tests directory:

pytest -v

Resources

• Voicemeeter VBAN TEXT

• Voicemeeter RT Packet Service