Driver to get measures from a flowmeter.
Project description
DRIVER FOR FLOWMETER
-
Introduction
The purpose of this package is to communicate with the flowmeter, read the measurements and save them to a csv file. To do this, you need one or two flowmeters and an Arduino Uno.
-
Flowmeter features
Flow range: 0.05 l/min - 10 l/min.
Supply voltage: 4.5V -24V.
Rated current: 8mA.
Output: NPN/PNP pulse current
Pipe diameter range: 8mm.
Connections:- Blue: Output. - Red: +4,5 - 24V. - Screen 0 V.
-
Arduino connection diagram
Power of the arduino through the usb to usb port of the controller.
Flow main:
- Blue: Pin 2 - Red: 5V - Screen: GND
Flow aux:
- Blue: Pin 8 - Red: 5V - Screen: GND
-
SCPI Commands
- Message: 'IDN*?' Response: ':IDN:FLOWmeter:DEVice: Device_number :VERsion: firmware_version \n'
- Message: ':MEASure:FLOW?' Response: ':MEASure:FLOW:DATA flow_main flow_aux \n'
-
References
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
wattrex-driver-flow-0.0.2.tar.gz
(43.3 kB
view hashes)
Built Distribution
Close
Hashes for wattrex-driver-flow-0.0.2.tar.gz
Algorithm | Hash digest | |
---|---|---|
SHA256 | 4b8dc96f7b49e2b0c2b542c1ca10af5658037f5e92c2f2f3d5b5b1f1d1d77881 |
|
MD5 | 669035ab6b86df05d2cd9417fc433318 |
|
BLAKE2b-256 | be73a931710cbc3b64498989d7ce04c883b4e6069fe836cccfc5e2769f3022ee |
Close
Hashes for wattrex_driver_flow-0.0.2-py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | c78555f614df7afcb5ec1f98b5889e9ce23fdcf4f033b0e5b80a26228041cc49 |
|
MD5 | f5095a76a46e3756a96e3d38efcfb218 |
|
BLAKE2b-256 | 415a7f7e3faf3ba8d57e8e482c77b03425b01c4e008212704361129a265386f9 |