Skip to main content

Library to interact with a Wirepas Network through MQTT/Protobuf API

Project description

Wirepas MQTT Library

This Python wheel is designed to ease the development of tools on top of Wirepas Gateway to backend Api (MQTT with protobuf payloads).

Connection through MQTT is wrapped and messages in protobuf format are generated and parsed for you.

Its main focus is to control a full network without to handle individually the connection to every gateways.

Most api can be used in a synchronous or asynchronous way to feat your design.

Automatically generated documentation is hosted here <https://wirepas.github.io/wirepas-mqtt-library/>__.

Installation

Install from PyPi


This package is available from
`PyPi <https://pypi.org/project/wirepas-mqtt-library/>`__.

.. code:: shell

        pip install wirepas-mqtt-library

From the source
~~~~~~~~~~~~~~~

This wheel can be install from source directly if you need modifications.

.. code:: shell

        pip install -e .

Basic example
-------------

Steps to write a script to send a message

Import the module ^^^^^^^^^^^^^^^^^

Once the wheel is installed, you can import the module easily

.. code:: python

from wirepas_mqtt_library import WirepasNetworkInterface

Create a Wirepas Network Interface object ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. code:: python

wni = WirepasNetworkInterface(host,
                              port,
                              username,
                              password)

This object will allow you to interact with the network. For example, you can retrieve the list of gateways

.. code:: python

wni.get_gateways()

Or print the list of sinks for a given network

.. code:: python

line = ""
for gw, sink, config in wni.get_sinks():
    line += "[%s:%s] " % (gw, sink)

print(line)

Send a message with broadcast address from all sinks of a given network ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. code:: python

for gw, sink, config in wni.get_sinks():
    try:
        res = wni.send_message(gw, sink, 0xFFFFFFFF, 1, 1, "This is a test message".encode())
        if res != wmm.GatewayResultCode.GW_RES_OK:
            print("Cannot send data to %s:%s res=%s" % (gw, sink, res))
    except TimeoutError:
        print("Cannot send data to %s:%s", gw, sink)

Architecture

Threading model


When creating a WirepasNetworkInterface object, few threads will be involved.

* **Network (MQTT) thread**: all the internal MQTT operations will happen on this dedicated thread but no code from your application will be executed on it

* | **Worker thread(s)**: these threads will be used to call all your callbacks.
  | It can be either asynchronous reception of gateway responses or the data you have registered to.
  | If long operation are expected in your callback (like IO operation), you can specify the number of threads to use when creating
  | your WirepasNetworkInterface object to avoid a bottleneck. In fact, multiple threads will allow to handle
  | a new callback if another one is executing long operations.
  | By default there is a single thread.

* **Your calling thread**: Any call made in synchronous mode (cb=None) will lock your calling thread until it a response is receive or a timeout has elapsed

Synchronous vs Asynchronous

Most of the WirepasNetworkInterface methods can be called synchronously or asynchronously. When synchronous, answer from the gateway is awaited before returning. from the gateway and a TimeoutError Exception will be generated if the gateway doesn't answer within the default 2s timeout.

.. code:: python

# Send a message as broadcast from sink sink_id attached to gateway gw_id on endpoint 1
# in a synchronous way
res = wni.send_message(gw, sink, 0xFFFFFFFF, 1, 1, "This is a test message".encode())
if res != wmm.GatewayResultCode.GW_RES_OK:
    print("Sending data synchronously failed: res=%s" % res)

But if you specify a callback, it will be called when the answer is received or never if the gateway doesn't answer.

.. code:: python

def on_message_sent_cb(res, param):
    if res != wmm.GatewayResultCode.GW_RES_OK:
        print("Sending data asynchronously failed: res=%s. Caller param is %s" % (res, param))

param = 1234
# Send a message as broadcast from sink sink_id attached to gateway gw_id on endpoint 1
# in an asynchronous way
wni.send_message(gw_id, sink_id, 0xFFFFFFFF, 1, 1, "This is a test message".encode(), cb=on_message_sent_cb, param=param)

License

Licensed under the Apache License, Version 2.0.

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

wirepas_mqtt_library-1.2.1rc2.tar.gz (26.8 kB view hashes)

Uploaded Source

Built Distribution

wirepas_mqtt_library-1.2.1rc2-py3-none-any.whl (27.4 kB view hashes)

Uploaded Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page