wirescale 0.9.5.post65

Wirescale: Secure, Efficient Connectivity. Elevate your network with stable WireGuard tunnels over Tailscale, enhancing speed and flexibility with customizable configuration.

Wirescale

Welcome to Wirescale, a revolutionary tool that transforms the way you use VPNs. Built for Linux, Wirescale leverages the power of WireGuard’s kernel-level performance and Tailscale’s unbeatable udp hole-punching capabilities to create a robust, fully customizable mesh VPN experience.

Table of contents

• Installation
  • Prerequisites
  • Install
  • Upgrade
  • Uninstall
• Use case
  • Architecture
  • Upgrading a connection
  • Exit Nodes
    • Example usage
    • Considerations about fwmarks and ip rules
  • The autoremove-%i unit
  • The [Wirescale] section
• Packaging
  • Python Wheel
  • Standalone executable binary
• Contributing
• License

Installation

Prerequisites

• ping
• pipx >= 1.1.0
• python >= 3.11
• systemd >= 252
• tailscale >= 1.60

Install

The installation is a three-step dance involving the program itself, the systemd service wirescaled.service, and the socket wirescaled.socket, also managed by systemd. Here’s the quickest way to get everything up and running:

~ $ curl -fsSL https://raw.githubusercontent.com/fernandoenzo/wirescale/master/install.sh | sudo sh

This magic command will download Wirescale, place it in a user-friendly folder via pipx, and create symbolic links to the systemd units in /etc/systemd/system. Easy peasy!

Upgrade

Once Wirescale is installed, keeping it up-to-date is a piece of cake with pipx.

Starting from version 1.5 of pipx you can simply do:

~ $ sudo pipx upgrade --global wirescale

For pipx versions lower than 1.5, you’ll need to specify the folders where Wirescale resides:

~ $ sudo PIPX_HOME=/opt/pipx PIPX_BIN_DIR=/usr/local/bin pipx upgrade wirescale

This command tells pipx exactly where to find wirescale, ensuring your upgrades are smooth and hassle-free. Now, you’re always equipped with the latest and greatest version of Wirescale!

Don't forget to reload and restart the wirescaled.service unit once the upgrade is completed:

~ $ sudo systemctl daemon-reload
~ $ sudo systemctl restart wirescaled.socket wirescaled.service

Uninstall

Need to uninstall? No problem! This script will make Wirescale disappear without a trace:

~ $ curl -fsSL https://raw.githubusercontent.com/fernandoenzo/wirescale/master/uninstall.sh | sudo sh

Use case

Tailscale has become the go-to solution for establishing point-to-point connections, effortlessly traversing NATs and interconnecting endpoints. However, it relies on a custom version of wireguard-go reimplemented by Tailscale, instead of the usual wireguard. This approach has its limitations - you can’t customize any connection parameters, and it doesn’t operate at the kernel level, which leads to suboptimal performance.

Beyond that, I struggle with a few things about Tailscale, such as the fact that it is not completely open source (coordination server is not, and I am forced to use a sketchy alternative like headscale) and it doesn't utilize the official WireGuard implementation like other projects such as Netmaker or Netbird. These projects, however, come with their own set of issues, like the complexity of their configuration process, unlike Tailscale, which is straightforward and quick.

While this might be acceptable for most users who aren’t concerned about performance or software freedom, I’ve always found it regrettable that Tailscale is not completely open source, even though they like to falsely promote themselves as such. Additionally, the fact that it also doesn't offer the same level of customization as the Wireguard configuration files bothered me. This is particularly relevant for advanced use cases, which is what this tool was designed for.

Wirescale takes a pre-existing Tailscale network and forces a hole punching between two machines. Using the port data obtained from the hole punching, Wirescale sets up a pure WireGuard connection between the two machines. But here’s the kicker - it uses user-defined WireGuard configuration files, allowing for 100% customization of every parameter. From pre/post scripts and network IPs to AllowedIPs and more, you have complete control over your WireGuard configuration.

In essence, Wirescale allows you to upgrade your connection between two machines on a Tailscale network to a pure WireGuard connection. And the best part? It operates independently of the Tailscale process.

Architecture

Wirescale is a multitasking champ! It runs as a UNIX and WebSockets server from the systemd unit, listening on both the local socket opened in the wirescaled.socket unit and the Tailscale IP of the machine running it. This means it can handle both remote requests for connection upgrades and local requests for a directed upgrade to another peer.

Curious about the different modes of operation? Run wirescale -h to see them:

• daemon mode is launched from the systemd unit. Configure it with the options that suit your needs (wirescale daemon -h will list them all).
• upgrade option is where the magic happens, and we’ll dive deeper into this shortly.
• recover option will attempt to re-establish the connection for an interface that has been detected as down, ensuring it reconnects with its peer. This option is for internal use only.
• exit-node option will allow you to route all your outgoing traffic through a peer acting as an exit node.
• down option is the easiest way to take down a network interface raised with Wirescale.

Upgrading a connection

Let’s imagine you have a Tailscale network with two machines, which we’ll call alice (100.64.0.1) and bob (100.64.0.2). These names, alice and bob, are how Tailscale identifies the machines when you run tailscale status and list all the devices, like this:

~ $ tailscale status
fd7a:115c:a1e0::1 alice    user     linux   -
fd7a:115c:a1e0::2 bob      user     linux   -

Now, you want to take it up a notch. You want a pure, unadulterated point-to-point WireGuard connection between alice and bob. It’s like setting up a private line in a world of party lines. How do you do it? Simple. You create WireGuard configuration files in /etc/wirescale/. For each peer you want to connect to, you’ll need to define a file with its name. So, on the alice machine, you’ll define an /etc/wirescale/bob.conf, and on the bob machine, you’ll define an /etc/wirescale/alice.conf.

These configuration files are standard WireGuard files, with an optional additional [Wirescale] section, as shown in the following complete example:

[Interface]
Address = 192.168.3.1
PrivateKey = sLBcu1HI/SCOXLwAnuG79DGS1jWDiwk0SyCM40uYuWI=
DNS = 1.1.1.1, 8.8.8.8
Table = off
MTU = 1500
PreUp = /bin/example arg1 arg2 %i %s
PostUp = /bin/example arg1 arg2 %i %s
PreDown = /bin/example arg1 arg2 %i %s
PostDown = /bin/example arg1 arg2 %i %s

[Peer]
PublicKey = QGAYCYJ1Ez7C32wZNw+nI8aBRM8E6OJGKOk0KiCYy0c=
PresharedKey = YFSVOA8Eo0Cj5q9ef0LBA3TudRhKP+3hZMwCljUnKms=
AllowedIPs = 192.168.3.0/24

[Wirescale]
iptables-forward = True
iptables-masquerade = True
interface = custom_name
suffix = true
recover-tries = 2
recreate-tries = 1

Notice the abscence of Endpoint and ListenPort fields? That’s wirescale working its magic, automatically filling these in based on what it captures from tailscale.

With Wirescale, you’re in control. You can go from a zero-trust configuration to a fully self-managed one. That means you don’t need to use a complete configuration file like in the previous example. The only essential fields you need to define are Address and AllowedIPs, as shown in the following example:

[Interface]
Address = 192.168.3.1

[Peer]
AllowedIPs = 192.168.3.0/24

If you opt for this, wirescale will automatically negotiate the public key and the pre-shared key for each connection established between peers. You can even asymmetrically configure the peers, specifying the PrivateKey field in one of them if you want it to always use the same one, and not in the other. In any case, any compatibility conflict between the peers’ configurations will be appropriately warned by wirescale. It’s your network, your rules!

We’ll focus on the options in the [Wirescale] section later. All you need to know now is that these options are also explained in wirescale upgrade -h, and that an option set by command line always takes precedence when wirescale acts as a client, as is the case here, over one set in a configuration file.

Once you’re happy with your setup, just launch the following command on one of the nodes, say, alice:

~ $ wirescale upgrade bob

Then we’ll see how the connection is established, with an output similar to the following if everything goes well:

Checking peer 'bob' is correct. This might take some minutes...
Start checking peer 'bob'
Checking that an endpoint is available for peer 'bob' (100.64.0.2)...
Peer 'bob' (100.64.0.2) is reachable
Connecting to local UNIX socket...
Connection to local UNIX socket established
defe22 - Enqueueing upgrade request to peer 'bob' (100.64.0.2)...
defe22 - The upgrade request for the peer 'bob' (100.64.0.2) is the next one in the processing queue
defe22 - The upgrade request for the peer 'bob' (100.64.0.2) has acquired the exclusive semaphore
defe22 - Starting to process the upgrade request for the peer 'bob' (100.64.0.2)
defe22 - Remote peer 'bob' (100.64.0.2) has enqueued our request
defe22 - Remote peer 'bob' (100.64.0.2) has started to process our upgrade request
defe22 - Stopping tailscale...
defe22 - Setting up WireGuard interface 'bob'...
defe22 - Starting tailscale...
defe22 - Launching autoremove subprocess. Running as unit: autoremove-bob.service
defe22 - Success! Now you have a new working P2P connection through interface 'bob'

In this example, defe22 is a randomly generated unique uid to easily follow the process trace when we execute the command journalctl -f -u wirescaled.service.

You can see your brand new P2P WireGuard connection working with:

~ $ wg show bob

and you'll get an output like this:

interface: bob
  public key: Jagl9ZKgJpnatDNH+2Z1WQC13dVMSyLyAh0iU98qrRc=
  private key: (hidden)
  listening port: 39216

peer: 9FFbjKGCbGWDIyDB6ZW4D/ENgxqBSBIiBfkBYCCSvjI=
  preshared key: (hidden)
  endpoint: 70.125.39.64:38741
  allowed ips: 192.168.3.0/24
  latest handshake: 5 seconds ago
  transfer: 308.02 KiB received, 368.59 KiB sent
  persistent keepalive: every 10 seconds

It’s worth noting that the configuration files generated by wirescale are located in /run/wirescale/, so you can check the transparency of the process.

Just a quick heads-up! If you stumble upon an "unexpected" Endpoint (like seeing a private IP when you’re expecting a public one due to an additional VPN between your machine and the peer), don’t be alarmed! You might have run into a known issue that Tailscale has steadfastly refused to fix. However, I’ve independently addressed this in my TailGate project, which you'll definitely find worth exploring.

Exit Nodes

The exit-node option allows you to route all outgoing traffic through a peer that acts as an exit node. This setup is ideal when you want to send all your traffic to the internet through another machine in your WireGuard network. When using this option, wirescale will ensure that your traffic is intelligently routed, meaning that local traffic to other nodes, be it in Wirescale or Tailscale networks, will not be affected. Only internet-bound traffic is forwarded through the exit node.

Example usage:

Continuing with the previous example, to enable an already set up interface bob as an exit node, simply run the following command:

~ $ sudo wirescale exit-node bob

If successful, you will see the following output:

Interface 'bob' has been enabled as an exit node ✅

You may ask at any time which interface is the current exit node:

~ $ wirescale exit-node --status
bob

To stop routing traffic through the exit node and revert to the previous configuration, run:

~ $ sudo wirescale exit-node --stop
Interface 'bob' has been deactivated as an exit node ❌

If you try to set a new exit node while one is already active, the current exit node will be automatically deactivated, and the new one will take over:

~ $ sudo wirescale exit-node alice
Interface 'bob' has been deactivated as an exit node ❌
Interface 'alice' has been enabled as an exit node ✅

For the exit node to function properly, the chosen peer must have both the iptables-masquerade and iptables-forward options enabled. Otherwise, the traffic forwarding to the internet might not work as expected or even at all.

Considerations about fwmarks and ip rules

If you plan to use the fwmark option in your WireGuard configuration files or are thinking about tinkering with the ip rules on your machine, there are some reserved values you need to keep in mind to avoid conflicts. Below is a list of the key values that both Wirescale (only while an exit-node is active) and Tailscale use:

1. Tailscale filters out any fwmark matching 0x80000/0xff0000
2. Wirescale filters out the fwmarks 0xa08d037b and 0xa08d037c
3. Tailscale uses the IP rule IDs 5210, 5230, 5250, and 5270 for its own rules
4. Wirescale uses IP rule IDs between 5500 and 6000 as needed
5. Wirescale sets a routing table with ID 0xA08D037A

So, if you're planning to mess around with IP rules or fwmarks, make sure you don’t break anything based on what we've just listed.

The autoremove-%i unit

In Wireguard’s configuration files, %i is a placeholder that gets replaced with the network interface name. If you look at the second-to-last line of the previous log, you’ll notice that a systemd unit called autoremove-bob.service was started right after the tunnel was set up. This unit has only one job: to either restore the connection if it drops or to remove the network interface if the connection can’t be restored.

A connection made with Wirescale is a pure P2P link between machines. This connection can drop for a variety of reasons, ranging from a machine losing its internet connection, to a router unilaterally closing the open connection, or even the local Linux firewall deciding it’s done with it. Theautoremove-bob.service unit is designed to attempt to restore the connection based on the recover-tries option in the WireGuard configuration file (or the--recover-tries command-line option when running wirescale upgrade). If the connection can’t be restored after the specified number of attempts, the network interface will be removed and a new connection will be attempted from scratch, based on the recreate-tries parameter or the --recreate-tries command-line option.

It’s crucial to note that both the recover and upgrade options require Tailscale to be operational to perform a new hole punching with the other peer. This is essential for establishing a direct connection between the two machines. However, if it’s not possible to find an Endpoint to the other peer, and the traffic is being relayed through a DERP server, wirescale will NOT set up a tunnel between the machines. This ensures that Wirescale only establishes connections when a direct peer-to-peer link is possible

Moreover, this systemd unit will actively try to keep the routers from closing the connection by sending small periodic packets. Therefore, it’s mandatory to have ping available on your system.

The [Wirescale] section

The [Wirescale] section of config files seen before is entirely optional, and accepts the following fields:

• interface The network interface name that WireGuard will set up for this peer. Defaults to the peer name.
• iptables-accept Can be true or false. If set to true, iptables rules will be added to allow incoming traffic through the new network interface. Use this only if the connection is unstable and needs to be recovered repeatedly. This should not be necessary in most cases. Defaults to false.
• iptables-forward Can be true or false. If set to true, iptables rules will be added to enable forwarding of traffic through the new network interface. Defaults to false.
• iptables-masquerade Can be true or false. If set to true, iptables rules will be added to mark and masquerade traffic routed through the new network interface. Use this to enable NAT for outgoing packets. Defaults to false.
• recover-tries The number of automatic recovery attempts if the connection drops before the network interface is brought down. Negative values indicate unlimited attempts. Defaults to 3 tries.
• recreate-tries The number of attempts to create a new tunnel if the network interface was brought down after failing to recover it. Negative values indicate unlimited retries. Defaults to 0 tries.
• suffix Can be true or false. When set to true, a numeric suffix is appended to new interfaces that share names with existing ones. This suffix can be referenced in the configuration file as %s, mirroring the substitution process that %i undergoes for the interface name. If no suffix is added, %s is set to 0. Defaults to false.

As mentioned earlier, any of these fields can be optionally configured when running the wirescale upgrade command. It's important to note that if Wirescale operates in a client role, command-line arguments will override settings specified in the configuration file.

Additionally, when Wirescale functions as a server through the wirescale daemon command specified in the systemd unit, the situation changes. In this scenario, preferences set via the configuration file will supersede those provided through command-line arguments.

Packaging

This section walks you through the packaging process. However, it’s important to note that you typically won’t need to worry about this. The recommended way to upgrade the program is through pipx, as explained earlier.

Python Wheel

To generate the program wheel, available at PyPi, install first autopackage with pipx:

~ $ pipx install autopackage

Once autopackage is installed, run the following command::

~ $ autopackage -s setup.py

This will generate the whl package and place it in the /releases directory.

Standalone executable binary

In addition to the wheel, you can also create a standalone binary of the program. This binary can run independently, without requiring a Python interpreter or any other library dependencies on your machine.

To build this binary, we’ll use a prepared script that leverages Docker:

~ $ ./bundle/generate

Running this command will generate an executable in the /dist directory. You can move this executable to /usr/local/bin, and it will operate independently.

One of the key advantages of this standalone binary is its compatibility. It’s designed to work across different Linux distributions, making the program versatile and user-friendly.

Contributing

Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.

License

This program is licensed under the GNU Affero General Public License v3 or later (AGPLv3+)