Skip to main content

Stripped down version of XFOIL as compiled python module

Project description


General
-------
This is a stripped down version of XFOIL, presented in the form of a Python module. What's unique about this package
w.r.t. many others out there allowing an interface to XFOIL, is the fact that the Python code talks directly to a
compiled Fortran library. This approach avoids having to read/write in-/output files to the disk and communicating with
the XFOIl executable. Eliminating the need for constant disk I/O operations can significantly speed up parallel
frameworks in particular, giving this approach a clear advantage.

Building and Installing the Python Module
-----------------------------------------
If you are on a Windows machine (64bit) with Python 3.6, installing XFoil is a simple matter of running:

```bash
pip install xfoil
```

If you are using a different type of machine, or a different version of Python, you will have to make sure some
software is installed on your system in order for the package to be successfully built. First of all, the module targets
Python 3, and does NOT support Python 2. So make sure a Python 3 environment is installed and available.
Furthermore, working compilers for C and Fortran have to be installed and on the PATH. On Windows, the build and
installation have ONLY been tested with MinGW, using gcc and gfortran.

Then, installing XFoil should be as simple as running

```bash
pip install .
```

from the root of the downloaded repository.

On Windows, you may have to force the system to use MinGW. To do so, create a file named `distutils.cfg` in
`PYTHONPATH\Lib\distutils` with the following contents:

```INI
[build]
compiler=mingw32
```

If you are not able to create this file for your Python environment, you can instead create a file named `setup.cfg` in
the root of the repo with the same contents. It is also possible to force the use of MinGW directly when invoking
`pip` by calling:

```bash
pip install --global-option build_ext --global-option --compiler=mingw32 .
```

Using the Module
----------------
All XFoil operations are performed using the `XFoil` class. So the first step when using this module is to create an
instance of this class:

```pycon
>>> from xfoil import XFoil
>>> xf = XFoil()
```

If this does not produce any errors, the installation should be functioning properly.


The symmetric NACA 0012 airfoil is included as a test case. It can be loaded into the XFoil library like this:

```pycon
>>> from xfoil.test import naca0012
>>> xf.airfoil = naca0012

Number of input coordinate points: 160
Counterclockwise ordering
Max thickness = 0.120008 at x = 0.308
Max camber = 0.000000 at x = 0.033

LE x,y = -0.00000 0.00000 | Chord = 1.00000
TE x,y = 1.00000 0.00000 |

Current airfoil nodes set from buffer airfoil nodes ( 160 )
```

Once the airfoil has been loaded successfully it can be analyzed. Let's analyze it for a range of angles of attack, at a
Reynolds number of one million. Let's limit the maximum number of iterations to 40 (the default is 20) as well.
For the range of angles of attack, we will go from -20 degrees to 20 degrees with steps of 0.5 degrees:

```pycon
>>> xf.Re = 1e6
>>> xf.max_iter = 40
>>> a, cl, cd, cm = xf.aseq(-20, 20, 0.5)
```

The XFOIL library should produce a lot of output, which should be familiar to those who have used the original XFOIL
application before. The final result are lists of angles of attack, `a`, and the corresponding lift coefficients, `cl`,
drag coefficients, `cd`, and moment coefficients, `cm`. We can now, for example, plot the lift curve for this airfoil:

```pycon
>>> import matplotlib.pyplot as plt
>>> plt.plot(a, cl)
>>> plt.show()
```

This should produce the following figure:

![NACA 0012 Lift Curve](https://github.com/daniel-de-vries/xfoil-python/raw/master/naca0012-lift-curve.png)

Just like in the original XFOIL application, an airfoil can also analyzed for a single angle of attack, single lift
coefficient, or a range of lift coefficients. The commands for these operations are

```pycon
>>> cl, cd, cm = xf.a(10)
>>> a, cd, cm = xf.cl(1)
>>> a, cl, cd, cm = xf.cseq(-0.5, 0.5, 0.05)
```

to analyze for an angle of attack of 10 degrees, a lift coefficient of 1.0, and for a range of lift coefficients from
-0.5 to 0.5 with steps of 0.05.

For other features and specifics, see the documentation in the Python source files.


Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

xfoil-0.0.13.tar.gz (12.4 kB view hashes)

Uploaded Source

Built Distribution

xfoil-0.0.13-cp36-cp36m-win_amd64.whl (442.2 kB view hashes)

Uploaded CPython 3.6m Windows x86-64

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page