z80 1.0b2

Fast and flexible Z80/i8080 Emulator

z80

Fast and flexible Z80/i8080 emulator.

Quick facts

• Implements accurate machine cycle-level emulation.

• Supports undocumented instructions, flags and registers.

• Passes the well-known cputest, 8080pre, 8080exer, 8080exm, prelim and zexall tests.

• Follows a modular event-driven design for flexible interfacing.

• Employs compile-time polymorphism for zero performance overhead.

• Cache-friendly implementation without large code switches and data tables.

• Offers default modules for the breakpoint support and generic memory.

• Supports multiple independently customized emulator instances.

• Written in strict C++11.

• Does not rely on implementation-defined or unspecified behavior.

• Single-header implementation.

• Provides a generic Python 3 API and instruments to create custom bindings.

• MIT license.

Contents

• Hello world
• Adding memory
• Input and output
• Accessing processor's state
• Modules
• The root module
• State modules
• Feedback

Hello world

#include "z80.h"

class my_emulator : public z80::z80_cpu<my_emulator> {
public:
    typedef z80::z80_cpu<my_emulator> base;

    my_emulator() {}

    void on_set_pc(z80::fast_u16 pc) {
        std::printf("pc = 0x%04x\n", static_cast<unsigned>(pc));
        base::on_set_pc(pc);
    }
};

int main() {
    my_emulator e;
    e.on_step();
    e.on_step();
    e.on_step();
}

hello.cpp

Building:

$ git clone [e-mail]:kosarev/z80.git
$ cmake z80
$ make
$ make test
$ make hello  # Or 'make examples' to build all examples at once.

Running:

$ ./examples/hello
pc = 0x0000
pc = 0x0001
pc = 0x0002

In this example we derive our custom emulator class, my_emulator, from a mix-in that implements the logic and default interfaces necessary to emulate the Zilog Z80 processor. As you may guess, replacing z80_cpu with i8080_cpu would give us a similar Intel 8080 emulator.

The on_set_pc() method overrides its default counterpart to print the current value of the PC register before changing it. For this compile-time polymorphism to be able to do its job, we pass the type of the custom emulator to the processor mix-in as a parameter.

The main() function creates an instance of the emulator and asks it to execute a few instructions, thus triggering the custom version of on_set_pc(). The following section reveals what are those instructions and where the emulator gets them from.

Adding memory

Every time the CPU emulator needs to access memory, it calls on_read() and on_write() methods. Their default implementations do not really access any memory; on_read() simply returns 0x00, meaning the emulator in the example above actually executes a series of nops, and on_write() does literally nothing.

Since both the reading and writing functions are considered by the z80::z80_cpu class to be handlers, which we know because they have the on preposition in their names, we can use the same technique as with on_set_pc() above to override the default handlers to actually read and write something.

class my_emulator : public z80::z80_cpu<my_emulator> {
public:
    ...

    fast_u8 on_read(fast_u16 addr) {
        assert(addr < z80::address_space_size);
        fast_u8 n = memory[addr];
        std::printf("read 0x%02x at 0x%04x\n", static_cast<unsigned>(n),
                    static_cast<unsigned>(addr));
        return n;
    }

    void on_write(fast_u16 addr, fast_u8 n) {
        assert(addr < z80::address_space_size);
        std::printf("write 0x%02x at 0x%04x\n", static_cast<unsigned>(n),
                    static_cast<unsigned>(addr));
        memory[addr] = static_cast<least_u8>(n);
    }

private:
    least_u8 memory[z80::address_space_size] = {
        0x21, 0x34, 0x12,  // ld hl, 0x1234
        0x3e, 0x07,        // ld a, 7
        0x77,              // ld (hl), a
    };
};

adding_memory.cpp

Output:

read 0x21 at 0x0000
pc = 0x0001
read 0x34 at 0x0001
read 0x12 at 0x0002
pc = 0x0003
read 0x3e at 0x0003
pc = 0x0004
read 0x07 at 0x0004
pc = 0x0005
read 0x77 at 0x0005
pc = 0x0006
write 0x07 at 0x1234

Input and output

Aside of memory, another major way the processors use to communicate with the outside world is via input and output ports. If you read the previous sections, it's now easy to guess that there is a couple of handlers that do that. These are on_input() and on_output().

Note that the handlers have different types of parameters that store the port address, because i8080 only supports 256 ports while Z80 extends that number to 64K.

    // i8080_cpu
    fast_u8 on_input(fast_u8 port)
    void on_output(fast_u8 port, fast_u8 n)

    // z80_cpu
    fast_u8 on_input(fast_u16 port)
    void on_output(fast_u16 port, fast_u8 n)

The example:

class my_emulator : public z80::z80_cpu<my_emulator> {
public:
    ...

    fast_u8 on_input(fast_u16 port) {
        fast_u8 n = 0xfe;
        std::printf("input 0x%02x from 0x%04x\n", static_cast<unsigned>(n),
                    static_cast<unsigned>(port));
        return n;
    }

    void on_output(fast_u16 port, fast_u8 n) {
        std::printf("output 0x%02x to 0x%04x\n", static_cast<unsigned>(n),
                    static_cast<unsigned>(port));
    }

private:
    least_u8 memory[z80::address_space_size] = {
        0xdb,        // in a, (0xfe)
        0xee, 0x07,  // xor 7
        0xd3,        // out (0xfe), a
    };
};

input_and_output.cpp

Accessing processor's state

Sometimes it's necessary to examine and/or alter the current state of the CPU emulator and do that in a way that is transparent to the custom code in overridden handlers. For this purpose the default state interface implemented in the i8080_state<> and z80_state<> classes provdes a number of getters and setters for registers, register pairs, interrupt flip-flops and other fields constituting the internal state of the emulator. By convention, calling such functions does not fire up any handlers. The example below demonstrates a typical usage.

Note that there are no such accessors for memory as it is external to the processor emulators and they themselves have to use handlers, namely, the on_read() and on_write() ones, to deal with memory.

class my_emulator : public z80::z80_cpu<my_emulator> {
public:
    ...

    void on_step() {
        std::printf("hl = %04x\n", static_cast<unsigned>(get_hl()));
        base::on_step();

        // Start over on every new instruction.
        set_pc(0x0000);
    }

accessing_state.cpp

Modules

By overriding handlers we can extend and otherwise alter the default behavior of CPU emulators. That's good, but what do we do if it's not enough? For example, what if the default representation of the processor's internal state doesn't fit the needs of your application? Say, you might be forced to follow a particular order of registers or you just want to control the way they are packed in a structure because there's some external binary API to be compatible with. Or, what if you don't need to emulate the whole processor's logic, and just want to check if a given sequence of bytes forms a specific instruction?

That's where modules come into play. To understand what they are and how to use them, let's take a look at the definitions of the emulator classes and see what's under the hood.

template<typename D>
class i8080_cpu : public i8080_executor<i8080_decoder<i8080_state<root<D>>>>
{};

template<typename D>
class z80_cpu : public z80_executor<z80_decoder<z80_state<root<D>>>>
{};

Each of these classes is no more than a stack of a few other mix-ins. The root<> template provides helpers that make it possible to call handlers of the most derived class in the heirarchy, D, which is why it takes that class as its type parameter. It also contains dummy implementations of the standard handlers, such as on_output(), so you don't have to define them when you don't need them.

i8080_state<> and z80_state<> have been mentioned in the previous section as classes that define transparent accessors to the processor state, e.g., set_hl(). They also define corresponding handlers, like on_set_hl(), that other modules use to inspect and modify the state.

i8080_decoder<> and z80_decoder<> modules analyze op-codes and fire up handlers for specific instructions, e.g, on_halt().

Finally, the job of i8080_executor<> and z80_executor<> is to implement handlers like on_halt() to actually execute corresponding instructions.

The convention is that modules shall communicate with each other only via handlers. Indeed, if they would call the transparent accessors or refer to data fields directly, then those accessors wouldn't be transparent anymore and handlers would never be called. This also means that modules are free to define transparent accessors in a way that seems best for their purpose or even not define them at all.

All and any of the standard modules can be used and customized independently of each other. Moreover, all and any of the modules can be replaced with custom implementations. New modules can be developed and used separately or together with the standard ones. In all cases the only requirement is to implement handlers other modules rely on.

The root module

template<typename D>
class root {
public:
    typedef D derived;

    ...

    fast_u8 on_read(fast_u16 addr) {
        unused(addr);
        return 0x00;
    }

    void on_write(fast_u16 addr, fast_u8 n) {
        unused(addr, n);
    }

    ...

protected:
    const derived &self() const{ return static_cast<const derived&>(*this); }
    derived &self() { return static_cast<derived&>(*this); }
};

The main function of the root module is to define the self() method that other modules can use to call handlers. For example, a decoder could do self().on_ret() whenever it runs into a ret instruction.

Aside of that, the module contains dummy implementations of the standard handlers that do nothing or, if they have to return something, return some default values.

State modules

template<typename B>
class i8080_state : public internals::cpu_state_base<B> {
public:
    ...

    bool get_iff() const { ... }
    void set_iff(bool f) { ... }

    ...
};

template<typename B>
class z80_state : public internals::cpu_state_base<z80_decoder_state<B>> {
public:
    ...

    void exx_regs() { ... }
    void on_exx_regs() { exx_regs(); }

    ...
};

The purpose of state modules is to provide handlers to access the internal state of the emulated CPU. They also usually store the fields of the state, thus defining its layout in memory.

Regardless of the way the fields are represented and stored, the default getting and setting handlers for register pairs use access handlers for the corresponding 8-bit registers to obtain or set the 16-bit values. Furthermore, the low half of the register pair is always retrieved and set before the high half. This means that by default handlers for 8-bit registers are getting called even if originally a value of a register pair they are part of has been queried. Custom implementations of processor states, however, are not required to do so.

    fast_u16 on_get_bc() {
        // Always get the low byte first.
        fast_u8 l = self().on_get_c();
        fast_u8 h = self().on_get_b();
        return make16(h, l);

    void on_set_bc(fast_u16 n) {
        // Always set the low byte first.
        self().on_set_c(get_low8(n));
        self().on_set_b(get_high8(n));
    }

Aside of the usual getters and setters for the registers and flip-flops, both the i8080 and Z80 states have to provide an on_ex_de_hl_regs() handler that exchanges hl and de registers the same way the xchg and ex de, hl do. And the Z80 state additionally has to have an on_exx_regs() that swaps register pairs just as the exx instruction does. The default swapping handlers do their work by accessing registers directly, without relying on the getting and setting handlers, similarly to how silicon implementations of the processors toggle internal flip-flops demux'ing access to register cells without actually transferring their values.

Because the CPUs have a lot of similarities, processor-specific variants of modules usually share some common code in helper base classes that in turn are defined in the internal class. That class defines entities that are internal to the implementation of the library. The client code is therefore supposed to be written as if the module classes are derived directly from their type parameters, B.

Note that z80_state has an additional mix-in in its inheritance chain, z80_decoder_state<>, whereas i8080_state is derived directly from the generic base. This is because Z80 decoders are generally not stateless objects; they have to track which of the IX, IY or HL registers has to be used as the index register for the current instruction. The decoder state class stores and provides access to that information.

template<typename B>
class z80_decoder_state : public B {
public:
    ...

    iregp get_iregp_kind() const { ... }
    void set_iregp_kind(iregp r) { ... }

    iregp on_get_iregp_kind() const { return get_iregp_kind(); }
    void on_set_iregp_kind(iregp r) { set_iregp_kind(r); }

    ...
};

In its simplest form, a custom state module can be a structure defining the necessary state fields together with corresponding access handlers.

template<typename B>
struct my_state : public B {
    fast_u16 pc;

    ...

    fast_u16 on_get_pc() const { return pc; }
    void on_set_pc(fast_u16 n) { pc = n; }

    ...

    // These always have to be explicitly defined.
    void on_ex_de_hl_regs() {}
    void on_ex_af_alt_af_regs() {}
    void on_exx_regs() {}
};

custom_state.cpp

Feedback

Any notes on overall design, improving performance and testing approaches are highly appreciated. Please file an issue or use the email given at https://github.com/kosarev. Thanks!