Zoho CRM SDK for ZOHO CRM 6 APIs
Project description
License
Copyright (c) 2021, ZOHO CORPORATION PRIVATE LIMITED
All rights reserved.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
ZOHO CRM PYTHON SDK 6.0 for API version 6
Table Of Contents
- Overview
- Registering a Zoho Client
- Environmental Setup
- Including the SDK in your project
- Persistence
- Configuration
- Initialization
- Class Hierarchy
- Responses And Exceptions
- Threading
- Sample Code
Overview
Zoho CRM PYTHON SDK offers a way to create client Python applications that can be integrated with Zoho CRM.
Registering a Zoho Client
Since Zoho CRM APIs are authenticated with OAuth2 standards, you should register your client app with Zoho. To register your app:
-
Visit this page https://api-console.zoho.com
-
Click on
ADD CLIENT
. -
Choose the
Client Type
. -
Enter Client Name, Client Domain or Homepage URL and Authorized Redirect URIs then click
CREATE
. -
Your Client app will be created.
-
Select the created OAuth client.
-
Generate grant token by providing the necessary scopes, time duration (the duration for which the generated token is valid) and Scope Description.
Environmental Setup
Python SDK is installable through pip. pip is a tool for dependency management in Python. SDK expects the following from the client app.
-
Client app must have Python(version 3 and above)
-
Python SDK must be installed into client app through pip.
Including the SDK in your project
-
Install Python from python.org (if not installed).
-
Install Python SDK
- Navigate to the workspace of your client app.
- Run the command below:
pip install zohocrmsdk6_0
-
The Python SDK will be installed in your client application.
Token Persistence
Token persistence refers to storing and utilizing the authentication tokens that are provided by Zoho. Token persistence enables the SDK to automatically refresh the access token after initialization using the refresh token without the need for user intervention. There are three ways provided by the SDK in which persistence can be utilized. They are DataBase Persistence, File Persistence, and Custom Persistence. Please note that the default method of token persistence provided by the Zoho CRM SDK is File persistence.
Table of Contents
Implementing OAuth Persistence
Once the application is authorized, OAuth access and refresh tokens can be used for subsequent user data requests to Zoho CRM. Hence, they need to be persisted by the client app.
The persistence is achieved by writing an implementation of the inbuilt Abstract Base Class TokenStore, which has the following callback methods.
-
find_token(self, token) - invoked before firing a request to fetch the saved tokens. This method should return implementation of inbuilt Token Class object for the library to process it.
-
save_token(self, token) - invoked after fetching access and refresh tokens from Zoho.
-
delete_token(self, id)) - The method to delete the particular stored token based on unique ID
-
get_tokens(self) - The method to get the all the stored tokens.
-
delete_tokens(self) - The method to delete all the stored tokens.
-
find_token_by_id(self, id) - The method to retrieve the user's token details based on unique ID.
Note:
- id is a String.
- token is an instance of Token Class.
DataBase Persistence
In case the user prefers to use default DataBase persistence, MySQL can be used.
-
Create a table in your Database with required columns
-
id varchar(10)
-
user_name varchar(255)
-
client_id varchar(255)
-
client_secret varchar(255)
-
refresh_token varchar(255)
-
access_token varchar(255)
-
grant_token varchar(255)
-
expiry_time varchar(20)
-
redirect_url varchar(255)
-
api_domain varchar(255)
-
Note:
- Custom database name and table name can be set in DBStore instance.
MySQL Query
CREATE TABLE oauthtoken (
id varchar(10) NOT NULL,
user_name varchar(255),
client_id varchar(255),
client_secret varchar(255),
refresh_token varchar(255),
access_token varchar(255),
grant_token varchar(255),
expiry_time varchar(20),
redirect_url varchar(255),
api_domain varchar(255),
primary key (id)
)
Create DBStore object
from zohocrmsdk.src.com.zoho.api.authenticator.store import DBStore
"""
DBStore takes the following parameters
1 -> DataBase host name. Default value "localhost"
2 -> DataBase name. Default value "zohooauth"
3 -> DataBase user name. Default value "root"
4 -> DataBase password. Default value ""
5 -> DataBase port number. Default value "3306"
6-> DataBase table name . Default value "oauthtoken"
"""
# store = DBStore()
store = DBStore(host='host_name', database_name='database_name', user_name='user_name', password='password', port_number='port_number', table_name = "table_name")
File Persistence
In case of File Persistence, the user can persist tokens in the local drive, by providing the absolute file path to the FileStore object.
- The File contains
-
id
-
user_name
-
client_id
-
client_secret
-
refresh_token
-
access_token
-
grant_token
-
expiry_time
-
redirect_url
-
api_domain
-
Create FileStore object
from zohocrmsdk.src.com.zoho.api.authenticator.store import FileStore
"""
FileStore takes the following parameter
1 -> Absolute file path of the file to persist tokens
"""
store = FileStore(file_path='/Users/username/Documents/python_sdk_token.txt')
Custom Persistence
Users can create their own logic for storing and retrieving authentication tokens using the custom persistence technique. To use Custom Persistence, you must implement TokenStore and override the methods.
from zohocrmsdk.src.com.zoho.api.authenticator.store import TokenStore
class CustomStore(TokenStore):
def __init__(self):
pass
def find_token(self, token):
"""
Parameters:
token (Token) : A Token (zohocrmsdk.src.com.zoho.api.authenticator.OAuthToken) class instance
"""
# Add code to get the token
return None
def save_token(self, token):
"""
Parameters:
token (Token) : A Token (zohocrmsdk.src.com.zoho.api.authenticator.OAuthToken) class instance
"""
# Add code to save the token
def delete_token(self, id):
"""
Parameters:
id (String) : id representing the unique token id
"""
# Add code to delete the token
def get_tokens(self):
"""
Returns:
list: List of stored tokens
"""
# Add code to get all the stored tokens
def delete_tokens(self):
# Add code to delete all the stored tokens
def find_token_by_id(self, id):
"""
The method to get id token details.
Parameters:
id (String) : A String id.
Returns:
Token : A Token class instance representing the id token details.
"""
Configuration
Before you get started with creating your Python application, you need to register your client and authenticate the app with Zoho.
Mandatory Keys | Optional Keys |
---|---|
token | logger |
environment | store |
sdk_config | |
proxy | |
resource_path |
The environment key contains the domain information to make API calls. The token key represents the OAuth info, including the clientID, clientSecret, grantToken, redirectURL, refreshToken or accessToken depending on the flow that you use. Refer to ##create an instance of OAuthToken## for more details.
-
Configure the API environment which decides the domain and the URL to make API calls.
from zohocrmsdk.src.com.zoho.crm.api.dc import USDataCenter """ Configure the environment which is of the pattern Domain.Environment Available Domains: USDataCenter, EUDataCenter, INDataCenter, CNDataCenter, AUDataCenter Available Environments: PRODUCTION(), DEVELOPER(), SANDBOX() """ environment = USDataCenter.PRODUCTION()
-
Create an instance of OAuthToken with the information that you get after registering your Zoho client. In the context of token persistence, the grant token flow and refresh token flow involve storing and persisting the token. However, the access token flow does not involve token persistence and the access token is directly utilized for API calls. Depending on the tokens available with you, choose grantToken flow, refreshToken flow or accessToken flow.
-
By default, the findUser key is set to true, to set userSignature. However, this requires the ZohoCRM.users.READ and ZohoCRM.org.READ scopes to be mandatory. If you do not want to set user_signature, you must set the find_user key to false.
-
Use the following method for grantToken flow :
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken token = OAuthToken(client_id= "clientId", client_secret="clientSecret", grant_token="grantToken", redirect_url="redirectURL")
- Use the following method for refreshToken flow :
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken token = OAuthToken(client_id= "clientId", client_secret="clientSecret", refresh_token="refreshToken", redirect_url="redirectURL")
- Use the following method for accessToken flow :
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken token = OAuthToken(access_token="accessToken")
- Use the following method for Id flow :
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken token = OAuthToken(id="tokenId")
-
-
Create an instance of Logger Class to log exception and API information.
from zohocrmsdk.src.com.zoho.api.logger import Logger """ Create an instance of Logger Class that takes two parameters 1 -> Level of the log messages to be logged. Can be configured by typing Logger.Levels "." and choose any level from the list displayed. 2 -> Absolute file path, where messages need to be logged. """ logger = Logger.get_instance(level=Logger.Levels.INFO, file_path="/Users/python_sdk_log.log")
-
Create an instance of TokenStore to persist tokens, used for authenticating all the requests. By default, the SDK creates the sdk_tokens.txt created in the current working directory) to persist the tokens.
- Use the following method for DB Store
from zohocrmsdk.src.com.zoho.api.authenticator.store import DBStore """ DBStore takes the following parameters 1 -> DataBase host name. Default value "localhost" 2 -> DataBase name. Default value "zohooauth" 3 -> DataBase user name. Default value "root" 4 -> DataBase password. Default value "" 5 -> DataBase port number. Default value "3306" 6 -> DataBase table name. Default value "oauthtoken" """ # store = DBStore() store = DBStore(host='host_name', database_name='database_name', user_name='user_name', password='password', port_number='port_number', table_name = "table_name")
- Use the following method for File Store
from zohocrmsdk.src.com.zoho.api.authenticator.store import FileStore """ FileStore takes the following parameter 1 -> Absolute file path of the file to persist tokens """ store = FileStore(file_path='/Users/python_sdk_tokens.txt')
- Use the following method for Custom Store
token_store = CustomStore()
-
Create an instance of SDKConfig containing SDK configurations.
from zohocrmsdk.src.com.zoho.crm.api.sdk_config import SDKConfig """ By default, the SDK creates the SDKConfig instance auto_refresh_fields (Default value is False) if True - all the modules' fields will be auto-refreshed in the background, every hour. if False - the fields will not be auto-refreshed in the background. The user can manually delete the file(s) or refresh the fields using methods from ModuleFieldsHandler(zohocrmsdk/src/com/zoho/crm/api/util/module_fields_handler.py) pick_list_validation (Default value is True) A boolean field that validates user input for a pick list field and allows or disallows the addition of a new value to the list. if True - the SDK validates the input. If the value does not exist in the pick list, the SDK throws an error. if False - the SDK does not validate the input and makes the API request with the user’s input to the pick list connect_timeout (Default value is None) A Float field to set connect timeout read_timeout (Default value is None) A Float field to set read timeout """ config = SDKConfig(auto_refresh_fields=True, pick_list_validation=False, connect_timeout=None, read_timeout=None)
-
The path containing the absolute directory path to store user specific files containing module fields information. By default, the SDK stores the user-specific files within a folder in the current working directory.
resource_path = '/Users/python-app'
-
Create an instance of RequestProxy containing the proxy properties of the user.
from zohocrmsdk.src.com.zoho.crm.api.request_proxy import RequestProxy """ RequestProxy takes the following parameters 1 -> Host 2 -> Port Number 3 -> User Name. Default value is None 4 -> Password. Default value is an empty string """ # request_proxy = RequestProxy(host='proxyHost', port=80) request_proxy = RequestProxy(host='proxyHost', port=80, user='userName', password='password')
Initializing the Application
Initialize the SDK using the following code.
from zohocrmsdk.src.com.zoho.crm.api.dc import USDataCenter
from zohocrmsdk.src.com.zoho.api.authenticator.store import DBStore, FileStore
from zohocrmsdk.src.com.zoho.api.logger import Logger
from zohocrmsdk.src.com.zoho.crm.api.initializer import Initializer
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken
from zohocrmsdk.src.com.zoho.crm.api.sdk_config import SDKConfig
from zohocrmsdk.src.com.zoho.crm.api.request_proxy import RequestProxy
class SDKInitializer(object):
@staticmethod
def initialize():
logger = Logger.get_instance(level=Logger.Levels.INFO,
file_path='/Users/user_name/Documents/python_sdk_log.log')
environment = USDataCenter.PRODUCTION()
token = OAuthToken(client_id='clientId', client_secret='clientSecret', grant_token='grant_token',
refresh_token="refresh_token", redirect_url='redirectURL', id="token_id")
# store = FileStore(file_path='/Users/username/Documents/python_sdk_tokens.txt')
store = DBStore(host='host_name', database_name='database_name', user_name='user_name', password='password',
port_number='port_number', table_name="table_name")
config = SDKConfig(auto_refresh_fields=True, pick_list_validation=False, connect_timeout=None,
read_timeout=None)
resource_path = '/Users/python-app'
# request_proxy = RequestProxy(host='host', port=8080)
request_proxy = RequestProxy(host='host', port=8080, user='user', password='password')
"""
Call the static initialize method of Initializer class that takes the following arguments
2 -> Environment instance
3 -> Token instance
4 -> TokenStore instance
5 -> SDKConfig instance
6 -> resource_path
7 -> Logger instance. Default value is None
8 -> RequestProxy instance. Default value is None
"""
Initializer.initialize(environment=environment, token=token, store=store, sdk_config=config,
resource_path=resource_path, logger=logger, proxy=request_proxy)
SDKInitializer.initialize()
-
Note:
- id: This is the unique id of the token which is auto-generated after successful SDK initialization.
- The value of id param in OAuthToken class should not match its parameter name.
-
You can now access the functionalities of the SDK. Refer to the sample codes to make various API calls through the SDK.
Class Hierarchy
Responses and Exceptions
All SDK methods return an instance of the APIResponse class.
After a successful API request, the get_object() method returns an instance of the ResponseWrapper (for GET) or the ActionWrapper (for POST, PUT, DELETE)
Whenever the API returns an error response, the get_object() returns an instance of APIException class.
ResponseWrapper (for GET requests) and ActionWrapper (for POST, PUT, DELETE requests) are the expected objects for Zoho CRM APIs’ responses
However, some specific operations have different expected objects, such as the following:
-
Operations involving records in Tags
- RecordActionWrapper
-
Getting Record Count for a specific Tag operation
- CountWrapper
-
Operations involving BaseCurrency
- BaseCurrencyActionWrapper
-
Lead convert operation
- ConvertActionWrapper
-
Retrieving Deleted records operation
- DeletedRecordsWrapper
-
Record image download operation
- FileBodyWrapper
-
MassUpdate record operations
- MassUpdateActionWrapper
- MassUpdateResponseWrapper
GET Requests
-
The get_object() returns an instance of one of the following classes, based on the return type.
-
Most of the APIs follows the Common Structure as below.
-
The ResponseHandler class encompasses the following
- ResponseWrapper class (for application/json responses)
- FileBodyWrapper class (for File download responses)
- APIException class
-
-
Some of the APIs follow the Particular Structure as below.
-
The ResponseHandler class encompasses the following
-
The ResponseHandler interface encompasses the following
- HistoryWrapper class (for application/json responses in backup API, holds the list of instances of History class and instance of Info class)
- UrlsWrapper class (for application/json responses in backup API, holds the instance of Urls class)
- SourcesCountWrapper class (for application/json responses in UserGroups API, holds the List of instances of SourceCount class)
- SourcesWrapper class (for application/json responses in Usergroups APi, holds the List of instances of Sources class and instance of Info class)
-
The ResponseWrapper class in BulkWrite API encompasses the following
- BulkWriteResponse class (for application/json responses)
- APIException class
-
The CountHandler class encompasses the following
- CountWrapper class (for application/json responses in Record API, holds the Long count)
- APIException class
-
The DeletedRecordsHandler class encompasses the following
- DeletedRecordsWrapper class (for application/json responses in Record API, holds the list of instances of DeletedRecord class and instance of Info class)
- APIException class
-
The DownloadHandler class encompasses the following
- FileBodyWrapper class (for File download responses)
- APIException class
-
The MassUpdateResponseHandler class encompasses the following
- MassUpdateResponseWrapper class (for application/json responses in Record API, holds the list of instances of MassUpdateResponse class)
- APIException class
-
The MassUpdateResponse class encompasses of following
- MassUpdate class (for application/json responses)
- APIException class
-
The ValidationHandler class in UserTerritories API encomposses the following
- ValidationWrapper class (for application/json responses, holds the list of instances of ValidationGroup class)
- APIException class
-
The ValidationGroup class in UserTerritories API encompasses the following
- Validation class
- BulkValidation class
-
POST, PUT, DELETE Requests
-
The getObject() of the returned APIResponse instance returns the response as follows.
-
Most of the APIs follows the Common Structure as.
-
The ActionHandler class encompasses the following
- ActionWrapper class (for application/json responses)
- APIException class
-
The ActionWrapper class contains Property/Properties that may contain one/list of ActionResponse class.
-
The ActionResponse class encompasses the following
- SuccessResponse class (for application/json responses)
- APIException class
-
-
Some of the APIs follow the Particular Structure as.
-
The ActionHandler class encompasses the following
- ActionWrapper class (for application/json responses)
- APIException class
-
The ActionWrapper class contains Property/Properties that may contain one/list of ActionResponse class.
-
The ActionResponse class encompasses the following
- BusinessHoursCreated class (for application/json responses in BusinessHours API)
- MassDeleteScheduled class (for application/json responses in MassDeleteCVID API)
- APIEXception class
-
The RecordActionHandler class encompasses the following
- RecordActionWrapper class (for application/json responses in Tags API, holds the list of instance of RecordActionResponse class, Boolean wfScheduler, String successCount and Boolean lockedCount)
- APIException class
-
RecordActionResponse class encompasses the following
- RecordSuccessResponse class (for application/json responses)
- APIException class
-
The ActionHandler class in Currencies API encompasses the following
- BaseCurrencyActionWrapper class (for application/json responses)
- APIException class
-
The BaseCurrencyActionWrapper class contains Property/Properties that contain BaseCurrencyActionResponse class.
-
The BaseCurrencyActionResponse class encompasses the following
- SuccessResponse class (for application/json responses)
- APIException class
-
The MassUpdateActionHandler class encompasses the following
- MassUpdateActionWrapper class (for application/json responses in Record API, holds the list of instances of MassUpdateActionResponse class)
- APIException class
-
The MassUpdateActionResponse class encompasses of following
- MassUpdateSuccessResponse class (for application/json responses)
- APIException class
-
The FileHandler class in Record API encompasses the following
- SuccessResponse class (for application/json responses)
- APIException class
-
The SignActionHandler class in MailMerge API encompasses the following
- SignActionWrapper class (for application/json responses)
- APIException class
-
The DeleteActionHandler class encompasses the following
- DeleteActionWrapper class (for application/json responses in ShareRecords API, holds the instance of DeleteActionResponse class)
- APIException class
-
The DeleteActionResponse class encompasses the following
- SuccessResponse class (for application/json responses)
- APIException class
-
The TransferActionHandler class in UserTerritories API encompasses the following
- TransferActionWrapper class (fro application/json responses , holds the list of instances of TransferActionResponse class)
-
The TransferActionResponse class encompasses the following
- SuccessResponse class (for application/json responses)
- APIException class
-
The ActionResponse class in Territories API encompasses the following
- Success class (for application/json responses)
- APIException class
-
The TransferPipelineActionHandler class in Pipeline API encompasses the following
- TransferPipelineActionWrapper class (for application/json responses, holds the list of insatnces of TransferPipelineActionResponse class)
- APIException class
-
The TransferPipelineActionResponse class in Pipeline API encompasses the following
- TransferPipelineSuccessResponse class (for application/json responses)
- APIException class
-
For example, when you insert two records, and one of them was inserted successfully while the other one failed, the ActionWrapper will contain one instance each of the SuccessResponse and APIException classes.
All other exceptions such as SDK anomalies and other unexpected behaviours are thrown under the SDKException class.
Multithreading in a Multi-user App
Multi-threading for multi-users is achieved using Initializer's static switch_user() method. switch_user() takes the value initialized previously for enviroment, token and sdk_config incase None is passed (or default value is passed). In case of request_proxy, if intended, the value has to be passed again else None(default value) will be taken.
# without proxy
Initializer.switch_user(environment=environment, token=token, sdk_config=sdk_config_instance)
# with proxy
Initializer.switch_user(environment=environment, token=token, sdk_config=sdk_config_instance, proxy=request_proxy)
Here is a sample code to depict multi-threading for a multi-user app.
import threading
from zohocrmsdk.src.com.zoho.crm.api.parameter_map import ParameterMap
from zohocrmsdk.src.com.zoho.crm.api.dc import USDataCenter, EUDataCenter
from zohocrmsdk.src.com.zoho.api.authenticator.store import DBStore
from zohocrmsdk.src.com.zoho.api.logger import Logger
from zohocrmsdk.src.com.zoho.crm.api.initializer import Initializer
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken
from zohocrmsdk.src.com.zoho.crm.api.record import *
from zohocrmsdk.src.com.zoho.crm.api.request_proxy import RequestProxy
from zohocrmsdk.src.com.zoho.crm.api.sdk_config import SDKConfig
class MultiThread(threading.Thread):
def __init__(self, environment, token, module_api_name, sdk_config, proxy=None):
super().__init__()
self.environment = environment
self.token = token
self.module_api_name = module_api_name
self.sdk_config = sdk_config
self.proxy = proxy
def run(self):
try:
Initializer.switch_user(environment=self.environment, token=self.token, sdk_config=self.sdk_config,
proxy=self.proxy)
param_instance = ParameterMap()
param_instance.add(GetRecordsParam.fields, "id")
response = RecordOperations(self.module_api_name).get_records(param_instance)
if response is not None:
print('Status Code: ' + str(response.get_status_code()))
if response.get_status_code() in [204, 304]:
print('No Content' if response.get_status_code() == 204 else 'Not Modified')
return
response_object = response.get_object()
if response_object is not None:
if isinstance(response_object, ResponseWrapper):
record_list = response_object.get_data()
for record in record_list:
for key, value in record.get_key_values().items():
print(key + " : " + str(value))
elif isinstance(response_object, APIException):
print("Status: " + response_object.get_status().get_value())
print("Code: " + response_object.get_code().get_value())
print("Details")
details = response_object.get_details()
for key, value in details.items():
print(key + ' : ' + str(value))
print("Message: " + response_object.get_message().get_value())
except Exception as e:
print(e)
@staticmethod
def call():
logger = Logger.get_instance(level=Logger.Levels.INFO,
file_path="/Users/user_name/Documents/python_sdk_log.log")
token1 = OAuthToken(client_id="clientId1", client_secret="clientSecret1", grant_token="Grant Token",
refresh_token="refresh_token", id="id")
environment1 = USDataCenter.PRODUCTION()
store = DBStore()
sdk_config_1 = SDKConfig(auto_refresh_fields=True, pick_list_validation=False)
resource_path = '/Users/user_name/Documents/python-app'
user1_module_api_name = 'Leads'
user2_module_api_name = 'Contacts'
environment2 = EUDataCenter.SANDBOX()
sdk_config_2 = SDKConfig(auto_refresh_fields=False, pick_list_validation=True)
token2 = OAuthToken(client_id="clientId2", client_secret="clientSecret2", grant_token="GRANT Token",
refresh_token="refresh_token", redirect_url="redirectURL", id="id")
request_proxy_user_2 = RequestProxy("host", 8080)
Initializer.initialize(environment=environment1, token=token1, store=store, sdk_config=sdk_config_1,
resource_path=resource_path, logger=logger)
t1 = MultiThread(environment1, token1, user1_module_api_name, sdk_config_1)
t2 = MultiThread(environment2, token2, user2_module_api_name, sdk_config_2, request_proxy_user_2)
t1.start()
t2.start()
t1.join()
t2.join()
MultiThread.call()
-
The program execution starts from call().
-
The details of user1 are given in the variables token1, environment1.
-
Similarly, the details of another user user2 are given in the variables token2, environment2.
-
For each user, an instance of MultiThread class is created.
-
When the start() is called which in-turn invokes the run(), the details of user1 are passed to the switch_user method through the MultiThread object. Therefore, this creates a thread for user1.
-
Similarly, When the start() is invoked again, the details of user2 are passed to the switch_user function through the MultiThread object. Therefore, this creates a thread for user2.
Multi-threading in a Single User App
Here is a sample code to depict multi-threading for a single-user app.
import threading
from zohocrmsdk.src.com.zoho.crm.api.parameter_map import ParameterMap
from zohocrmsdk.src.com.zoho.crm.api.dc import USDataCenter
from zohocrmsdk.src.com.zoho.api.authenticator.store import DBStore
from zohocrmsdk.src.com.zoho.api.logger import Logger
from zohocrmsdk.src.com.zoho.crm.api.initializer import Initializer
from zohocrmsdk.src.com.zoho.api.authenticator.oauth_token import OAuthToken
from zohocrmsdk.src.com.zoho.crm.api.sdk_config import SDKConfig
from zohocrmsdk.src.com.zoho.crm.api.record import *
class MultiThread(threading.Thread):
def __init__(self, module_api_name):
super().__init__()
self.module_api_name = module_api_name
def run(self):
try:
print("Calling Get Records for module: " + self.module_api_name)
param_instance = ParameterMap()
param_instance.add(GetRecordsParam.fields, "id")
response = RecordOperations(self.module_api_name).get_records(param_instance)
if response is not None:
print('Status Code: ' + str(response.get_status_code()))
if response.get_status_code() in [204, 304]:
print('No Content' if response.get_status_code() == 204 else 'Not Modified')
return
response_object = response.get_object()
if response_object is not None:
if isinstance(response_object, ResponseWrapper):
record_list = response_object.get_data()
for record in record_list:
for key, value in record.get_key_values().items():
print(key + " : " + str(value))
elif isinstance(response_object, APIException):
print("Status: " + response_object.get_status().get_value())
print("Code: " + response_object.get_code().get_value())
print("Details")
details = response_object.get_details()
for key, value in details.items():
print(key + ' : ' + str(value))
print("Message: " + response_object.get_message().get_value())
except Exception as e:
print(e)
@staticmethod
def call():
logger = Logger.get_instance(level=Logger.Levels.INFO,
file_path="/Users/user_name/Documents/python_sdk_log.log")
token = OAuthToken(client_id="clientId", client_secret="clientSecret", grant_token="grant_token",
refresh_token="refresh_token", redirect_url="redirectURL", id="id")
environment = USDataCenter.PRODUCTION()
store = DBStore()
sdk_config = SDKConfig()
resource_path = '/Users/user_name/Documents/python-app'
Initializer.initialize(environment=environment, token=token, store=store, sdk_config=sdk_config,
resource_path=resource_path, logger=logger)
t1 = MultiThread('Leads')
t2 = MultiThread('Quotes')
t1.start()
t2.start()
t1.join()
t2.join()
MultiThread.call()
-
The program execution starts from call() where the SDK is initialized with the details of the user.
-
When the start() is called which in-turn invokes the run(), the module_api_name is switched through the MultiThread object. Therefore, this creates a thread for the particular MultiThread instance.
SDK Sample code
from zohocrmsdk.src.com.zoho.api.authenticator import OAuthToken
from zohocrmsdk.src.com.zoho.crm.api import Initializer, HeaderMap
from zohocrmsdk.src.com.zoho.crm.api.dc import USDataCenter
from zohocrmsdk.src.com.zoho.crm.api.record import RecordOperations, BodyWrapper, Record, Field, ActionWrapper, SuccessResponse, APIException
class CreateRecords:
@staticmethod
def initialize():
environment = USDataCenter.PRODUCTION()
token = OAuthToken(client_id="client_id", client_secret="client_secret", grant_token="grant_token")
Initializer.initialize(environment, token)
@staticmethod
def create_records(module_api_name):
"""
This method is used to create records of a module and print the response.
:param module_api_name: The API Name of the module to create records.
"""
"""
example
module_api_name = 'Leads'
"""
record_operations = RecordOperations(module_api_name)
request = BodyWrapper()
# List to hold Record instances
records_list = []
record = Record()
"""
Call add_field_value method that takes two arguments
Import the zcrmsdk.src.com.zoho.crm.api.record.field file
1 -> Call Field "." and choose the module from the displayed list and press "." and choose the field name from the displayed list.
2 -> Value
"""
record.add_field_value(Field.Leads.last_name(), 'Python SDK')
record.add_field_value(Field.Leads.first_name(), 'New')
record.add_field_value(Field.Leads.company(), 'Zoho')
record.add_field_value(Field.Leads.city(), 'City')
record.add_field_value(Field.Leads.annual_revenue(), 1231.1)
records_list.append(record)
request.set_data(records_list)
header_instance = HeaderMap()
response = record_operations.create_records(request, header_instance)
if response is not None:
print('Status Code: ' + str(response.get_status_code()))
response_object = response.get_object()
if response_object is not None:
if isinstance(response_object, ActionWrapper):
action_response_list = response_object.get_data()
for action_response in action_response_list:
if isinstance(action_response, SuccessResponse):
print("Status: " +
action_response.get_status().get_value())
print("Code: " + action_response.get_code().get_value())
print("Details")
details = action_response.get_details()
for key, value in details.items():
print(key + ' : ' + str(value))
print("Message: " +
action_response.get_message().get_value())
elif isinstance(action_response, APIException):
print("Status: " +
action_response.get_status().get_value())
print("Code: " + action_response.get_code().get_value())
print("Details")
details = action_response.get_details()
for key, value in details.items():
print(key + ' : ' + str(value))
print("Message: " +
action_response.get_message().get_value())
elif isinstance(response_object, APIException):
print("Status: " + response_object.get_status().get_value())
print("Code: " + response_object.get_code().get_value())
print("Details")
details = response_object.get_details()
for key, value in details.items():
print(key + ' : ' + str(value))
print("Message: " + response_object.get_message().get_value())
module_api_name = "Leads"
CreateRecords.initialize()
CreateRecords.create_records(module_api_name)
Project details
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Hashes for zohocrmsdk6_0-6.0.0-py2.py3-none-any.whl
Algorithm | Hash digest | |
---|---|---|
SHA256 | e4aef0a1a6453a9caae05f8c0e666cd072fe84d9cf89f3e6de81950189c3b753 |
|
MD5 | e1ff7fcb81b2a306e56d5ccf3d32fa9f |
|
BLAKE2b-256 | 88efab2957f4baec8b96f59f2c57a3905774726699e717de2e69d9512ba12af8 |