adafruit-circuitpython-as7341 1.2.19

CircuitPython library for use with the Adafruit AS7341 breakout

Introduction

CircuitPython library for use with the Adafruit AS7341 breakout. NOTE: Due to the size of this library, it may not work on M0 (ex: Trinket M0) and other low memory boards.

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-as7341

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-as7341

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-as7341

Usage Example

from time import sleep
import board
from adafruit_as7341 import AS7341

i2c = board.I2C()  # uses board.SCL and board.SDA
sensor = AS7341(i2c)


def bar_graph(read_value):
    scaled = int(read_value / 1000)
    return "[%5d] " % read_value + (scaled * "*")


while True:

    print("F1 - 415nm/Violet  %s" % bar_graph(sensor.channel_415nm))
    print("F2 - 445nm//Indigo %s" % bar_graph(sensor.channel_445nm))
    print("F3 - 480nm//Blue   %s" % bar_graph(sensor.channel_480nm))
    print("F4 - 515nm//Cyan   %s" % bar_graph(sensor.channel_515nm))
    print("F5 - 555nm/Green   %s" % bar_graph(sensor.channel_555nm))
    print("F6 - 590nm/Yellow  %s" % bar_graph(sensor.channel_590nm))
    print("F7 - 630nm/Orange  %s" % bar_graph(sensor.channel_630nm))
    print("F8 - 680nm/Red     %s" % bar_graph(sensor.channel_680nm))
    print("Clear              %s" % bar_graph(sensor.channel_clear))
    print("Near-IR (NIR)      %s" % bar_graph(sensor.channel_nir))
    print("\n------------------------------------------------")
    sleep(1)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.