adafruit-circuitpython-us100 1.1.24

CircuitPython library for reading distance and temperature via US-100 ultra-sonic sensor.

Introduction

CircuitPython library for reading distance and temperature via US-100 ultra-sonic sensor

Dependencies

This driver depends on:

• Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-us100

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-us100

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-us100

Usage Example

import time
import board
import busio
import adafruit_us100

uart = busio.UART(board.TX, board.RX, baudrate=9600)
# Create a US-100 module instance.
us100 = adafruit_us100.US100(uart)

while True:
    print("-----")
    print(f"Temperature: {us100.temperature}°C")
    print(f"Distance: {us100.distance} cm")
    time.sleep(0.5)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.