amfiprot 0.1.10

Core library for Amfiprot

Amfiprot is a communication protocol for embedded devices used and developed by Amfitech. The protocol can be extended with plugins for specific devices implementing the Amfiprot protocol (e.g. the AmfiTrack).

Prerequisites

• Python 3.6 or higher.

Installation

Install (or update) amfiprot with pip:

pip install -U amfiprot

Quick start

The basic workflow when using the library is:

1. Create a Connection to a device connected directly to the host machine (we call this the "root node").
2. Search for Nodes on the Connection (i.e. nodes connected through the root node)
3. Create a Device using one of the discovered Nodes.
4. Start the Connection.
5. Communicate with the Device.

Example:

import amfiprot

VENDOR_ID = 0xC17
PRODUCT_ID = 0xD12

if __name__ == "__main__":
    conn = amfiprot.USBConnection(VENDOR_ID, PRODUCT_ID)
    nodes = conn.find_nodes()

    print(f"Found {len(nodes)} node(s).")
    for node in nodes:
        print(f"[{node.tx_id}] {node.name}")

    dev = amfiprot.Device(nodes[0])
    conn.start()
    
    cfg = dev.config.read_all()

    while True:
        if dev.packet_available():
            print(dev.get_packet())

The following sections provide a more in-depth explanation.

Discovering and connecting to a root node

After attaching a device to your host machine, you can scan for connected devices (e.g. connected via USB) with:

phys_devs = amfiprot.USBConnection.discover()

for dev in phys_devs:
    print(dev)

A connection can then be created using a specific physical device:

conn = amfiprot.USBConnection(dev['vid'], dev['pid'], dev['serial_number'])

Using serial_number is optional. If none is given, the first device matching the given vendor and product ID is used.

Finding nodes

After creating a connection, we can search for nodes that are connected to the root node (e.g. via RF or UART):

nodes = conn.find_nodes()

find_nodes() returns a list of Node instances. A Node provides a low-level interface to the physical device and can be used to retrieve the uuid, tx_id and name of the device, and send/receive raw packets. It is not recommended to use the Node directly, but rather attach it to a Device instance.

Creating a device

A Device is an abstraction layer on top of a Node and is created by injecting a Node in the constructor:

dev = amfiprot.Device(node)

The Device provides a higher-level interface allowing the user to easily:

• Update the firmware
• Reboot the device
• Read/write configurations
• Read decoded packets

We are still able to access the Node through the Device if necessary:

tx_id = dev.node.tx_id

Starting the connection and interacting with the device

Before interacting with the Device, the Connection must be started:

conn.start()

This creates a child process that asynchronously sends and receives packets on the specified interface. We can now interact with the Device in the main process without worrying about blocking:

device_name = dev.name()
print(f"Reading packets from {device_name}...")

while True:
	if dev.packet_available():
		print(dev.get_packet())

We can access the device configuration through a Configurator instance which is automatically created as a member (dev.config) of the Device:

# Read the entire configuration as a JSON-like object (a list of dicts)
cfg = dev.config.read_all()

# Print all parameters
for category in cfg:
    print(f"CATEGORY: {category['name']}")
    for parameter in category['parameters']:
        print(parameter)

The configuration can be easily saved to and loaded from a .json file:

import json

# Write configuration to file
with open("config.json", "w") as outfile:
	json.dump(cfg, outfile, indent=4)

# Read configuration from file and send to device
with open("config.json", "r") as infile:
    new_cfg = json.load(infile)
    dev.config.write_all(new_cfg)

Contributions and bug reporting

The Amfiprot Python package is open-source and the source code can be found on our Github repository. Contributions can be made through pull requests to the development branch. Bug reports and feature requests can be created in the Issues tab.