aws-mail 0.0.5

AWS sendmail replacement using boto3.

AWS mail client

The tool is written to send everything piped into it from stdin as an email, considering the settings found in config.yml.

As this client uses the boto3 library to send emails through AWS SES, it can be used as replacement for sendmail or any other mailer client on AWS instances - I found it very hard to configure postfix and could not make it work at all. Please also see the below: Configure tools relying on /usr/sbin/sendmail.

The AWS EC2 instance should have an instance role attached, which allows sending emails through AWS SES.

By default it just sends everything from stdin. The tool will recognize certain tools' log structure and will leave everything not part of it. This works for:

• logwatch
• unattended-upgrade
• cron

Note:

• aws_mail ignores unknown cli arguments, e.g. the ones usually sent to sendmail.

Quick start

# Install.
python3 -mvenv venv
venv/bin/pip install aws_mail

# Configuration.
mkdir /etc/aws_mail/
touch /etc/aws_mail/config.yml
# Copy fromthe example 'config.yml' into '/etc/aws_mail/config.yml'.
# Adapt the configuration options.

# Use.
echo -e "subject: update\nto: [e-mail]\n\nGood day today." | venv/bin/aws_mail --region us-east-1

Installation

This tool is available on pypi. It is best to install it into a virtual environment:

python3 -m venv venv
venv/bin/pip install aws_mail

Instaalled this way you will find an executable called aws_mail. Its location depends on the way you installed the tool - I recommend to work with absolute paths when referring to the aws_mail location.

Usage

In general aws_mail works like this:

    echo "Good day today." | venv/bin/aws_mail --region us-east-1

Configuration

option	description	default	configuration options
--config	Path to the configuration file.	/etc/aws_mail/config.yml	Absolute, relative path and/or symlink.
--region	AWS region to use.	us-east-1	Can also be set in the configuration file.
--default-subject	Forces subject to be loaded from the configuration file <\br> Otherwise considers a line starting with Subject:.	False (not set)	Default value is the name of the event in the configuration file.
--default-recipients	Forces recipients to be loaded from the configuration file <\br> Otherwise considers a line starting with To:.	False (not set)	Default value is set in configuration file.
--debug	Enables debug output.	False (not set)

Configuration file

Email settings need to be configured in config.yml. This configures an AwsSesEmailHook event from the eventhooks module.

Since the default path to the configuration file is /etc/aws_mail/config.yml, you need to make sure both, path and file, exist. However, you can also give another configuration file location by passing:

--config /path/to/config.yml

Example configuration file:

events:
  example_mail_event_name:  # <-- Name of the event, used as default subject.
    enabled: true  # <-- Everything but 'true' disables this event.
    type: AwsSesEmailHook  # <-- Type of hook to use.
    sender: "{{ sender_address }}"  # <-- Change that to your sender address.
    sender_name: "{{ sender_name }}"  # <-- Change that to your sender name.
    region: "{{ aws_region }}"  # <-- AWS region the AWS SES endpoint is listening on.
    recipients:  # <-- Change that if you like or configure the tool properly, see below.
      - "{{ recipient_address}}"

Email subject

If the tool should find a line starting with subject: (piped into it), this will be used as email subject.

    # The subject will be 'Daily logs from server1'.
    echo -e "subject: Daily logs from server1\nGood day today." | venv/bin/aws_mail

Otherwise or when forced with --default-subject, the event name (key in config.yml) is used as email subject.

    # If event in 'config.yml' is called 'example_mail_event_name'
    events:
      example_mail_event_name:
      ...
    # the actual subject will be 'example_mail_event_name':
    echo -e "subject: Daily logs from server1\nGood day today." | venv/bin/aws_mail --default-subject

Email recipients

If the tool should find a line starting with to: (piped into it), this will be used as email recipients.

    # The recipients will be '[e-mail],[e-mail]'.
    echo -e "to: [e-mail],[e-mail]\nGood day today." | venv/bin/aws_mail

Otherwise or when forced with --default-recipients, the recipients defined in config.yml are used as email recipients.

    # If the recipients in 'config.yml' are defined as:
    events:
      example_mail_event_name:
        recipients:
          - "[e-mail]"
          - "[e-mail]"
        ...
    # the actual recipients will be '[e-mail],[e-mail]':
    echo -e "to: [e-mail]\nGood day today." | aws_client. --default-recipients

AWS region

To make sure the boto3 client is initialized with the correct AWS SES region, add it to your config.yml.

Another option is to directly pass the parameter to the tool:

--region us-east-1

Configure logwatch

When logwatch is installed, there will also be a daily cronjob by default, created in /etc/cron.daily/00logwatch on debian or /etc/cron.daily/0logwatch on RHEL/CentOS. Make sure the cronjob is configured with --output mail.

• On debian/Ubuntu:
  • There are 2 locations: /usr/share/logwatch/default.conf/logwatch.conf and /usr/share/logwatch/dist.conf/logwatch.conf.
  • /usr/share/logwatch/dist.conf/logwatch.conf is read after /usr/share/logwatch/default.conf/logwatch.conf.
• On AmazonLinux/RHEL/CentOS:
  • There is only /usr/share/logwatch/default.conf/logwatch.conf.

Configure aws_mail.py as email client application in the appropriate file (depending on your config.yml):

• /usr/share/logwatch/dist.conf/logwatch.conf on debian/Ubuntu.
• /usr/share/logwatch/default.conf/logwatch.conf on AmazonLinux/RHEL/CentOS.

MailTo = <[e-mail]>
mailer = "/complete/path/to/venv/bin/aws_mail --region us-east-1"

Note:

• It is also possible toleave sendmail as mailer client and just create a symlink to aws_mail.py as described below.
• aws_mail.py ignores unknown cli arguments, the ones usually sent to sendmail.
• If you like to just use the recipients defined within config.yml, add the following option to the mailer:

mailer = "/complete/path/to/venv/bin/aws_mail --region us-east-1 --default-recipients"

Configure tools relying on /usr/sbin/sendmail

Tools like:

• unattended-upgrade (debian)
• cron
  • cron will send out emails using sendmail in case of error logs in /var/log/syslog (debian/Ubuntu)//var/log/messages (AmazonLinux/RHEL/CentOS).
  • aws_mail is configured to log ERORRs with imported modules only.

I could not find a place to actually configure the mailer client, so the only option left is to symlink /usr/bin/sendmail to aws_mail:

# Create symlink, remove existing file if necessary.
sudo ln -s /complete/path/to/venv/bin/aws_mail /usr/sbin/sendmail

Note:

• aws_mail ignores unknown cli arguments, the ones usually sent to sendmail.

Note:

• Recipients for both, unattended-upgradeand cron, can be configured simliar to logwatch:
  • unattended-upgrade

        # '/etc/apt/apt.conf.d/50unattended-upgrades'
        Unattended-Upgrade::Mail "[e-mail]"
    

  • cron

        # Set in according crontab or cron file in '/etc/cron*'.
        MAILTO=[e-mail]
    

Development and dependencies

A local developemnt environment can be created the following way:

# Clone the repo.
python3 -m venv venv

# Install build dependencies.
venv/bin/pip install -r build_requirements.txt

# Check below for updating python dependencies.

# Install dependencies.
venv/bin/pip-sync --dry-run requirements.txt
venv/bin/pip-sync requirements.txt

# Run.
venv/bin/python -m aws_mail.aws_mail

Python dependencies can be added in requirements.in.

Please just run ./update_requirements.sh to compile requirements.txt (using pip-tools) containing only pinned dependency versions eventually.

Deployment

Code style

The necessary configuration files for tools like:

• flake8
• black
• pylint
• pre-commit

are kept in the common reporitory https://github.com/normoes/python_style_generalt. The tool copier can be used to get the latest version of those files. By default the latest tag is retrieved, the option --vcs-ref=HEAD retrieves from the most recent commit.

# Initial command, sets some values for the project.
copier --vcs-ref=HEAD copy  '[e-mail]:normoes/python_style_general.git'  ./

# Update the files
copier --vcs-ref=HEAD update

Note:

• Local changes need to be committed to make copier work.