collective.xmpp.core 0.1a4

Enables core functionality for XMPP-enabled Plone add-ons.

============
Introduction
============

``collective.xmpp.core`` is a fork/merge of `jarn.xmpp.twisted`_ and `jarn.xmpp.core`_ both written by Yiorgis Gozadinos (@ggozad).

It removes the PubSub and Messaging features from the `jarn.xmpp.core`_ and is intended to instead serve
only as a base on which Plone add-ons with XMPP-enabled features can depend.

Currently it provides the following features:

* Extensions to the `wokkel`_ package by implementing parts of the following XMPP extensions:

* `XEP-0071`_ XHTML-IM.

* `XEP-0144`_ Roster Item Exchange.

* `XEP-0060`_ Publish-Subscribe.

* `XEP-0248`_ PubSub Collection Nodes.

* `XEP-0133`_ Service Administration.

* A `Twisted`_ reactor that runs side-by-side with the Zope instance.
* Utilities that provide XMPP clients of two sorts, a *deferred* client that initially connects, executes a task and disconnects as soon as it is done, as well as a normal client that remains connected and can respond to XMPP events.
* An XMPP component base class for writing custom components.
* Integration of plone user accounts with XMPP accounts and authentication.

============
Installation
============

Before setting up the package you need to have a working XMPP server and access to the administration account on the server. The package has only been tested with ejabberd version 2.1.5 and above which is recommended. In any case the following XMPP extensions need to be supported by the server you are going to use:

* `XEP-0144`_ Roster Item Exchange.
* `XEP-0133`_ Service Administration.
* `XEP-0124`_ Bidirectional-streams Over Synchronous HTTP (BOSH)
* `XEP-0206`_ XMPP over BOSH

.. --------
.. Buildout
.. --------
.. A sample buildout you can use as a starting point can be found at `collective.xmpp.buildout`_.

-----------------------------
Setting up ejabberd (>=2.1.5)
-----------------------------

Automatic configuration
-----------------------

* Use the recipe provided in `collective.xmpp.buildout`_ (in which case you
will need to have erlang installed, erlang-nox on Debian) or download the
`ejabberd`_ installer.

* A minimal configuration for ejabberd can be generated for convenience by the ``ejabberd.cfg`` part of `collective.xmpp.buildout`_. You will need to copy the ``templates`` directory and modify the recipe configuration accordingly::

[ejabberd.cfg]
recipe = collective.recipe.template
input = templates/ejabberd.cfg.in
output = ${buildout:directory}/etc/ejabberd.cfg
xmppdomain = localhost
admin_userid = admin
collaboration_allowed_subnet = 0,0,0,0
collaboration_port = 5347
component_password = secret


where ``xmppdomain`` is the domain (or virtual host) running on your XMPP server and ``admin_userid`` is the id the the administrator account that Plone is going to use to interact with the server. The rest of the options are used by ``collective.xmpp.collaboration`` for the collaborative editing component connecting to the XMPP server. Here, ``collaboration_allowed_subnet`` specifies from which IPs the XMPP server is going to accept connections and should match the IPs your Plone instances are going to be using. Leaving it to ``0,0,0,0`` will allow all IPs, ``127,0,0,1`` will allow only ``localhost``. Finally ``collaboration_port`` is the port to which the collaboration component is going to connect to and ``component_password`` is the shared password between the component and the XMPP server.

Manual configuration
--------------------
If you already run an XMPP server here are some hints on how to set it up:

* We assume that your xmpp domain is ``localhost``. There should exist an administrator account ``admin@localhost``. In addition if you intend to run some of the tests in any of the ``collective.xmpp.*`` packages you will need to be running an additional XMPP node on ``localhost`` if you use some other domain for production. You can safely remove any references to ``localhost`` if you are not interested in doing that.

* Make sure you have enabled the `http_bind` module, as this is what the javascript clients will use to connect. You should have something like this in your ejabberd.cfg:

::

{5280, ejabberd_http, [
http_bind,
web_admin
]}

* In order to test and run custom XMPP components (for instance the collaborative editing component provided by ``collective.xmpp.collaboration``) you will need to allow them to connect. This means you should have something similar to this configuration:

::

{5347, ejabberd_service, [
{access, all},
{shaper_rule, fast},
{ip, {127, 0, 0, 1}},
{hosts,
["collaboration.localhost"],
[{password, "secret"}]
}
]},

The rest of the standard options should be fine.

Administrator account
---------------------
If you have not done so during installation you might need to create manually the administrator account. In the ejabberd folder execute::

./bin/ejabberdctl register admin localhost your_password

Test that you can access your ejabberd by logging to the admin interface (typically ``http://localhost:5280/admin``). You should also be able to access the ``http-bind`` interface at ``http://localhost:5280/http-bind``.

-------------------------------
Setting up your front-end proxy
-------------------------------
On the client-side every authenticated user will be connected to your jabber server through an emulated bidirectional stream through HTTP. To allow for this you need a proxy in front of Plone that will be redirecting the XMPP stream to your XMPP server. It is possible to do without one using the inferior solution of Flash plugins but this is not going to be supported.

So assuming you run ``nginx`` as a proxy at port ``8080`` for the domain ``localhost``, Zope listens on ``8081``, there exists a Plone site with id ``Plone`` and your ejabberd has the ``http_bind`` configured for port ``5280``, your ``nginx`` configuration will look like this:

::

http {
server {
listen 8080;
server_name localhost;
location ~ ^/http-bind/ {
proxy_pass http://localhost:5280;
}

location / {
proxy_pass http://localhost:8081/VirtualHostBase/http/localhost:8080/Plone/VirtualHostRoot/;
}
}
}

-------------------------------
Setting up your Plone instances
-------------------------------
Your instances will need to maintain a connection to the administrator account of your XMPP server. This is accomplished through ``Twisted`` and you will need to run a Twisted reactor on each of them. To do so include this in your instance section of your buildout:

::

zcml-additional =
<configure xmlns="http://namespaces.zope.org/zope">
<include package="collective.xmpp.core" file="reactor.zcml" />
</configure>

Again, it will help you to have a look at the sample buildout provided in `collective.xmpp.buildout`_.

---------------------------
Setting up a new Plone site
---------------------------
* Start ejabberd (if you used the recipe to build ejabberd, ``bin/ejabberd`` will do the job).
* Start the Nginx frontend. ``bin/frontend start``
* Start your zope instance.
* Access Zope directly at ``http://localhost:8081/manage`` and create a new Plone site with ``collective.xmpp.core``.
* Go to the Plone control panel and click on the ``XMPP Integration`` link
under ``Plone Configuration``. Make sure the XMPP settings reflect your
installation.
* Restart your Plone instance.
* Upon the first request the administrator will log to his account. You should see things happening in the logs and if there are any errors something might be wrong with your installation.
* When you create a new Plone user, they will automatically be registered on
the XMPP server. Your existing users can also be registered by going back to
the ``XMPP Integration`` configlet in the control panel, and then clicking on
the ``User Registration`` tab. Keep an eye on your instance.log traceback in
the console to make sure there aren't any errors. You can see the registered
users by going to the XMPP admin interface at localhost:5280/admin.

--------------------------
Making sure things work ;)
--------------------------

This is a complex infrastructure so it can be hard to know what goes wrong sometimes. Do not despair, here are a few things to try:

* Make sure your ejabberd is running. Connect to it normal client as the admin user.
* Verify that http-binding is setup properly on ejabberd. Visiting ``http://localhost:5280/http-bind`` should tell you it's working.
* Verify that XMPP requests will get properly through your proxy. Visiting ``http://localhost:8080/http-bind/`` should give you the same result as above.
* When you start your Zope instance in foreground you can verify the Twisted reactor is running fine:

::

2011-09-01 14:37:38 INFO collective.xmpp.core Starting Twisted reactor...
2011-09-01 14:37:38 INFO collective.xmpp.core Twisted reactor started
2011-09-01 14:37:38 INFO Zope Ready to handle requests

* After the first request to the site, you should also see in the logs:

::

2011-09-01 14:45:48 INFO collective.xmpp.core XMPP admin client has authenticated succesfully.

* If your Plone user was succesfully registered on the XMPP server, logging-in to the Plone site with a user should also authenticate him with the XMPP server. This is indicated in the logs by:

::

2011-09-01 14:45:50 INFO collective.xmpp.core Pre-binded ggozad@localhost/auto-QravOoyEeE

=============
Experimenting
=============

-----
Usage
-----

* Add a few users.
* Login as one of them, and in a different browser as some other. Use the frontend to access the site, if you used the settings above this should be ``http://localhost:8080``.
* All actions are performed through the viewlet on the top right: ``Online users`` will display the users currently logged in. Clicking it will give you the list of users. You can message them directly or look at their personal feed.
* Try posting an entry to your feed. Links will be transformed automatically. As soon as you submit other logged-in users will receive a notification in real-time. Using a recent browser that supports geolocation will allow you also share your location at the time of the post.
* Try commenting on a feed post.
* By clicking on the "Following" user action you can select which users you want to follow, or follow them all.
* You can see all posts by clicking on ``Site feed`` on the viewlet.

========
Security
========

Included is an implementation of an authenticating client over BOSH according to `XEP-0206`_. This practically means that the javascript client never needs to know the password of the XMPP user. Instead, the user is authenticated directly between the XMPP server and the Plone instance. A pair of secret tokens are exchanged, valid for a short time (~2 minutes). It is this pair that is given to the javascript client and not the password.

When a Plone user is registered on the XMPP server, a random password is generated and stored in the ZODB in a persistent utility.

If you do not need to access the XMPP accounts outside of the Plone instance you can additionally hide the entire XMPP service behind a firewall and only allow connections to it from the Plone instances. This in combination with HTTPS should be enough for the paranoid among us.

=======
Testing
=======

Some of the included tests are functional tests that require a XMPP server running on ``localhost`` as well as an administrator account setup up on this server with JID ``admin@localhost`` and password ``admin``. If you wish to run those you have to specify a *level* 2 on your testrunner, i.e.

::

./bin/test -a 2 -s collective.xmpp.core


=======
Credits
=======

* Thanks goes Yiorgis Gozadinos (@ggozad) for writing jarn.xmpp.core and being the first to integrate XMPP into Plone.

.. _XEP-0248: http://xmpp.org/extensions/xep-0248.html
.. _XEP-0060: http://xmpp.org/extensions/xep-0060.html
.. _XEP-0071: http://xmpp.org/extensions/xep-0071.html
.. _XEP-0144: http://xmpp.org/extensions/xep-0144.html
.. _XEP-0133: http://xmpp.org/extensions/xep-0133.html
.. _XEP-0124: http://xmpp.org/extensions/xep-0124.html
.. _XEP-0206: http://xmpp.org/extensions/xep-0206.html
.. _ejabberd: http://www.ejabberd.im
.. _Jarn AS: http://jarn.com
.. _collective.xmpp.core: http://github.com/collective/collective.xmpp.core
.. _collective.xmpp.buildout: http://github.com/collective/collective.xmpp.buildout
.. _jarn.xmpp.buildout: http://github.com/ggozad/jarn.xmpp.buildout
.. _collective.xmpp.collaboration: http://github.com/collective/collective.xmpp.collaboration
.. _jarn.xmpp.twisted: http://github.com/ggozad/jarn.xmpp.twisted
.. _jarn.xmpp.core: http://github.com/ggozad/jarn.xmpp.core
.. _wokkel: http://wokkel.ik.nu
.. _Twisted: http://twistedmatrix.com


=========
Changelog
=========

0.1a4 (2012-11-19)
------------------
- Documentation updated
[jcbrand]
- Fixed HISTORY.txt markup
[alecghica]
- Fixed version used for Products.UserAndGroupSelectionWidget to >2.04
as earlier version will crash due to API changes
[ghicaale]
- Bugfix. Password utility forgets user passwords when a user is registered.
[jcbrand]

0.1a3 (2012-11-09)
------------------
- Bugfix for RuntimeError that might occur when upgrading from 0.1a1 to 0.1a2
[jcbrand]

0.1a2 (2012-11-09)
------------------
- Add control panel configlet for configuration and registering XMPP users.
[jcbrand]
- Add support for PAS plugins (such as LDAP).
[jcbrand]

0.1a1 (2012-10-18)
------------------
- Forked from jarn.xmpp.core 0.34
[jcbrand]
- Merged in jarn.xmpp.twisted 0.1
[jcbrand]
- Removed all PubSub and Messaging related features.
[jcbrand]
- Add browserlayer and check for it when handling events.
[jcbrand]
- Fixed the @@setup-xmpp script to only register the next user once the previous one
has finished.
[jcbrand]