cs147dvparser 0.0.6

converts CS147DV assembly language instructions into hexadecimal code

CS147DVPyParser

This program is intended for students of Kaushik Patra's San Jose State University CS147 - Computer Architecture class. It can be used to quickly convert CS147DV Assembly language instructions to hexadecimal machine code. It may not work as intended if CS147DV has been changed/updated since it was last updated in December of 2019.

CS147DV Instruction Set Architecture

This architecture is created and maintained by Mr. Kaushik Patra for his CS147 - Computer Architecture class. His contact information is:

Kaushik Patra, Lecturer,
Department Of Computer Science,
San Jose State University,
One Washington Square,
San Jose, CA.

email: [e-mail]

Requirements

The program is known to work with Python2.7+ and 3.7+. The package does not rely on any external dependencies.

Quick set-up

There are two main ways to interact with this program:

1. from the command line
2. imported as a module

1) Run the program from the command line

The program can be run directly from the command line. It has a fairly robust set of features, and comes in 3 modes:

1. interactive mode
2. command-line driven mode
3. file driven mode

---

a) interactive mode

When run with no arguments, the program will enter interactive mode:

$ python AssemblyParser.py

WELCOME TO CS147DV INTERACTIVE INSTRUCTION PARSER!
ENTER IN YOUR INSTRUCTIONS ONE AT A TIME
THE RESULT WILL BE PRINTED TO THE SCREEN
INPUT SHOULD BE OF THE TYPE:
  R-Type:  <mnemonic> <rd>,<rs>,<rt|shamt>
  I-Type:  <mnemonic> <rt>,<rs>, <imm>
  J-Type:  <mnemonic> <address>
OUTPUT WILL BE A 32 BIT HEXADECIMAL NUMBER
PRESS ctrl-c TO EXIT AT ANY TIME

enter your intruction: _

Interactive mode can also be evoked explicitly with the -i flag:

  $ python AssemblyParser.py -i

---

b) command line driven mode

In this mode, the user can pass in any valid CS147DV assembly code instruction to the program as a command-line argument:

One instruction:

$ python AssemblyParser.py "addi r2 r3 5"

More than one instruction:

$ python AssemblyParser.py "<instruction1>" "<instruction2>"

Assembly instructions will be parsed one at a time in the order they are passed in on the command line from left to right.

---

c) file driven mode.

In this mode, a text file contatining a list of instructions are passed in to the program. The file must consist of a single instruction on each line of the file. The instructions are parsed one at a time from top to bottom.

$ python AssemblyParser.py -f instructions.txt  

---

note: Modes can be mixed and matched. You can even run all three modes at once:

$ python AssemblyParser.py "addi r1 r2 3" -f instructions.txt -i 

When mixing and matching modes, the instructions will be processed in the following order

1. from the command line
2. from a file
3. from interactive mode.

---

Output

output from parsing an instruction will look similar to this:

 R-Type detected
 <mnemonic> <rd> <rs> <rt|shamt> [base]

 input: add r1 r2 r3
  _____________________________________
 |opcode| rs  | rt  | rd  |shamt| funct|
 |______|_____|_____|_____|_____|______|

 opcode rs      rt      rd      shamt   funct
 000000 00010   00011   00001   00000   100000

 binary_string:
 0000 0000 0100 0011 0000 1000 0010 0000

 hexadecimal_string result:
 00430820

---

options

additional options include:

• -o, --outfile (outfile): specify a file to write the hexadecimal output from each instruction parse. The current contents of <outfile> will be completely overwritten.
• -a, --append: append the results of each instruction to <outfile> instead of overwriting. This option does nothing if not combined with the -o option.
• -q, --quiet: suppress all other output except for the hexadecimal parse of each instruction.

other arguments include:

• -h, --help : display help information and exit
• -f, --file : parse instructions from a file
• -i, --interactive : evoke interactive mode.

click here for information about proper CS147DV Assembly Instruction formatting

---

---

2. import the program as a module

AssemblyParser.py can be imported as a module into another program.

import AssemblyParser
hex_result = AssemblyParser.parse_instruction('addi r2 r3 5')
print(hex_result)

The above script will output:

20620005

To see meta-data about each instruction, set the verbose printer vprint to 'verbose':

import AssemblyParser
hex_result = AssemblyParser.parse_instruction('addi r2 r3 5', vprint='verbose')
print('\nhex result')
print(hex_result)

which will output:

I-Type
<mnemonic> <rt> <rs> <imm> [base]
input: addi r2 r3 5
 ___________________________________
|opcode| rs  | rt  |   immediate    |
|______|_____|_____|________________|

opcode  rs      rt      imm
001000  00011   00010   0000000000000101

binary_string
0010 0000 0110 0010 0000 0000 0000 0101

hex result
20620005

To parse many instructions:

import AssemblyParser

instructions = ['addi r12 r12 12','addi r14 r14 14', 'sll r2 r2 5']
for i in instructions:
  hex_result = AssemblyParser.parse_instructions(i)
  print(r)

---

---

CS147DV Instruction Format

Instructions must be of the form:

• R-Type :

  • <mnemonic> <rd> <rs> <rt|shamt> [base]
  • <mnemonic> <rd>, <rs>, <rt|shamt> [base]

  examples:

  • "add r2 r3 r4"
  • "and r2, r3, r4"
  • "or r2,r3,r4"
  • "sll r2 R3,0x08"
  • "srl R2,3, 10 bin"
  • "SLL r2 R3 10 decimal"
  • "SRL R2 r3 10 hex"
  • "jr r15"

• I-Type :

  • <mnemonic> <rt> <rs> <immediate> [base]
  • <mnemonic>,<rt>,<rs>,<immediate> [base]

  examples

  • "addi r2 r2 3"
  • "lui, r5,5"
  • "beq,r5,r6,0xaf"
  • "lw r10 r11 1010,bin"

• J-Type :

  • <mnemonic> <address> [base]
  • <mnemonic>, <address> [base]

  examples:

  • "jmp 0x2b3da9f"
  • "push"

---

Registers must begin with an r or and R and must be followed by a decimal. r10 will always map to register 10d: 001010 and never register 10b: 00010 or register 10h 100001

If you choose an R-type instruction that requires a shift amount shamt instead of a register rt, the script will fail if the value passed in begins with an [rR]

example:

enter your intruction: sll r2 r3 r4
shift operations require a shamt, not a register
try again


enter your intruction: sll r2 r3 4

R-Type
<mnemonic> <rd> <rs> <rt|shamt> [base]
input: sll r2 r3 4
_____________________________________
|opcode| rs  | rt  | rd  |shamt| funct|
|______|_____|_____|_____|_____|______|

opcode  rs      rt      rd      shamt   funct
000000  00011   00000   00010   00100   000001

binary_string
0000 0000 0110 0000 0001 0001 0000 0001

hexadecimal_string result:
00601101

---

[base] is used to directly specify what your data type is.

it can be applied to the following fields:

• <shamt>
• <immediate>
• <address>

Options for [base]:

• bin, binary
• decimal
• hex, hexadecimal

dec can not be used to specify a decimal since the string 'dec' is a valid hexadecimal number (3564d).

note: you can also simply prefix a hexadecimal with 0x to ensure it is converted to hexadecimal

If not specified, the script will attempt to convert any number to binary in the following order:

1. binary
2. decimal
3. hexadecimal

note: This order is necessary since all binary strings are also valid decimal and hexadecimal strings.

example. Pay close attention to the shamt amount as different bases are specified for the number string '10':

• [base] not specified:

  enter your intruction: sll r2 r3 10
  
  R-Type
  <mnemonic> <rd> <rs> <rt|shamt> [base]
  input: sll r2 r3 10
   _____________________________________
  |opcode| rs  | rt  | rd  |shamt| funct|
  |______|_____|_____|_____|_____|______|
  
  opcode  rs      rt      rd      shamt   funct
  000000  00011   00000   00010   00010   000001
  
  binary_string
  0000 0000 0110 0000 0001 0000 1000 0001
  
  hexadecimal_string result:
  00601081
  

• [base] set to binary (same as above):

  enter your intruction: sll r2 r3 10 bin
  
  R-Type
  <mnemonic> <rd> <rs> <rt|shamt> [base]
  input: sll r2 r3 10
   _____________________________________
  |opcode| rs  | rt  | rd  |shamt| funct|
  |______|_____|_____|_____|_____|______|
  
  opcode  rs      rt      rd      shamt   funct
  000000  00011   00000   00010   00010   000001
  
  binary_string
  0000 0000 0110 0000 0001 0000 1000 0001
  
  hexadecimal_string result:
  00601081
  

• with [base] set to decimal:

  enter your intruction: sll r2 r3 10 decimal
  
  R-Type
  <mnemonic> <rd> <rs> <rt|shamt> [base]
  input: sll r2 r3 10 d
   _____________________________________
  |opcode| rs  | rt  | rd  |shamt| funct|
  |______|_____|_____|_____|_____|______|
  
  opcode  rs      rt      rd      shamt   funct
  000000  00011   00000   00010   01010   000001
  
  binary_string
  0000 0000 0110 0000 0001 0010 1000 0001
  
  hexadecimal_string result:
  00601281
  

• with [base] set to hexadecimal:

  R-Type
  <mnemonic> <rd> <rs> <rt|shamt> [base]
  input: sll r2 r3 10 hex
   _____________________________________
  |opcode| rs  | rt  | rd  |shamt| funct|
  |______|_____|_____|_____|_____|______|
  
  opcode  rs      rt      rd      shamt   funct
  000000  00011   00000   00010   10000   000001
  
  binary_string
  0000 0000 0110 0000 0001 0100 0000 0001
  
  hexadecimal_string result:
  00601401
  

Notice how the value of shamt and thus the binary_string and hexadecmal_string result change as the [base] is specified.

CS147DVPyParser website